Atlantis Land 800NV User Manual

Size:
2.88 Mb
Download

Before you use this Product

This Atlantis Land product has been designed with safety in mind. However, if not used properly electrical products can cause fires which may lead to serious body injury. To avoid such accidents, be sure to heed the following.

Legal Caution

Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

Heed the safety precautions

Be sure to follow the general safety precautions and the “Operation Notice.”

In case of a breakdown

In case of system breakdown, discontinue use and contact your authorized Atlantis Land dealer.

In case of abnormal operation

If the unit emits smoke or an unusual smell,

If water or other foreign objects enter the cabinet, or

If you drop the unit or damage the cabinet:

1 Disconnect the cable and the connecting cables.

2 Contact your authorized Atlantis Land dealer or the store where you purchased the product.

Operation Notice - Operating or storage location

Avoid operating or storing the camera in the following locations:

Extremely hot or cold places (Operating temperature: 0 °C to +50 °C [32 °F to 122°F])

Exposed to direct sunlight for a long time, or close to heating equipment (e.g., near heaters)

Close to sources of strong magnetism

Close to sources of powerful electromagnetic radiation, such as radios or TV transmitters

Locations subject to strong vibration or shock

Ventilation

To prevent heat buildup, do not block air circulation around the device.

Transportation

When transporting the camera, repack it as originally packed at the factory or in materials of equal quality.

Cleaning

Use a soft, dry cloth to clean the external surfaces of the device. Stubborn stains can be removed using a soft cloth dampened with a small quantity of detergent solution, then wipe dry.

Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface.

2

Index

 

Installation...........................................................

2

Using IP Camera via Mobile Phone...................

2

Using IP Camera via Web Browser ...................

3

1. Initial accessing the IP camera.........................................................................................

5

2. Configuration of Main Menu .............................................................................................

6

2.1

Setting ......................................................................................................................

6

2.2

Client Setting ...........................................................................................................

7

2.3

Image Setup .............................................................................................................

7

2.4

Live View ..................................................................................................................

7

Setting ....................................................................................................................................

 

9

3. Basic...................................................................................................................................

 

9

3.1

System......................................................................................................................

9

3.2 Camera ...................................................................................................................

13

3.3

Network ..................................................................................................................

20

3.4

Security ..................................................................................................................

27

4. Advance............................................................................................................................

29

4.1

FTP Client...............................................................................................................

29

4.2 SMTP.......................................................................................................................

35

4.3

HTTP Event ............................................................................................................

40

4.4

Schedule.................................................................................................................

42

4.5 Alarm Buffer ...........................................................................................................

43

4.6

Motion Detection....................................................................................................

45

4.7 System Log ............................................................................................................

47

Installation

Installation Steps

Follow these steps to install the NetCameraIR Camera on your Ethernet:

1.Check the package contents against the list below.

2.Set the device. See IP Installer User Manual on the available methods.

Package Contents

Item

Description

IP Camera

IP Camera

Power Adapter

PoE Injector

Accessory Pack

Contains accessories for mounting the camera

CD

User Manual / Software

Printed Document

Quick Installation Guide

Overview

Green line: Audio In

Pink line: Audio Out

Video Out

Power

Network

2

Using IP Camera via Mobile Phone

To use IP cameras via mobile phones, please make sure your RTSP is set to “ON”. (Default is “ON”) To change the settings of IP cameras, please see “Settings” for details.

3G Mobile Phone viewing

For 3G mobile phone viewing, type “rtsp://<IP>:<PORT>/video.3gp” into your 3G web browser. <IP> is the IP address of your IP camera, <PORT> is the RTSP port of your IP camera (Default value is 8554.)

Example: rtsp://100.10.10.1:8554/video.3gp

Note:

• You can also use RTSP clients (RealPlayer, MPlayer, Windows Media Player, Quicktime…etc.) to view RTSP streaming, just type in “rtsp://<IP>:<PORT>/video.3gp” as the Player’s URL

2.5G Mobile Phone viewing

For 2.5G mobile phone viewing, type “<IP>/mobile.wml” into your 2.5G web browser. <IP> is the IP address of your IP camera.

2

Using IP Camera via Web Browser

System Requirement

To use the product normally, we strongly recommend your computer follows our minimum system requirement (Computer level lower than this might cause some problems)

Item

 

Requirements

CPU

 

Pentium 4 1600MHz (or equivalent AMD)

Graphic Card

64MB RAM graphic cards (or equivalent on-boardgraphic cards)

RAM

 

512MB

Operating System

 

Windows 98, ME (Please see

 

)

 

Note

 

 

Windows 2000, 2003, XP, Vista

Web Browser

 

Internet Explorer 6 or later

Note:

• If you’re using Windows 98 or ME, please install IP Installer before using WEB UI to ensure the system runs normally.

3

How to Use

This chapter introduces how to monitor the image from the device using Microsoft web browser. The Atlantis Land IP camera can be used with Microsoft web browsers and Intelligent IP Installer in Windows operation systems. This document focuses on introducing you to Microsoft web browser. The recommended browser for Windows is Internet Explorer 6.0. If you want to know how to use Atlantis Land IP camera with Intelligent IP Installer, check Intelligent IP Installer User’s Manual in Windows operation systems.

The functions of the device should be set by the Administrator. For further instructions on setting the device, see “Setting the Camera” .

4

1. Initial accessing the IP camera

1. Start your web browser, and enter the IP address or host name of the ATLANTIS LAND IP camera in the Location / Address field of your browser.

Note

If you only want to view the video without setting page, enter “http://<IP>/index2.htm” as your web URL.

2.Use the default account “admin” and default password “admin”.

Note

• The default user name “admin” and the password are set at the factory for the administrator. You can change them in the Account Menu underSetting on page 19.

3. The monitor image will be displayed in your browser.

5

2. Configuration of Main Menu

Language

You can click the pulldown box to select system language, including English, Traditional Chinese, Simplified Chinese, German, Japanese and Spanish.

2.1 Setting

This function is only for the Administrator. Click this button to get into the Basic andAdvance settings menu.

6

2.2 Client Setting

Mode: Click the pulldown box to choose between MPEG4 and MJPEG video compression mode.

Note MJPEG streaming is unavailable if RTSP mode is ON.

View Size: Select the desired display image resolution to 640X480 or 320X240.

Protocol: Select the transferring protocol from TCP, UDP, HTTP and Multicast.

Video Buffer: Turn the Video Buffer function On/Off. The Video Buffer function makes the streaming more smoothly in unsteady network environment, but might cause a little delay in live viewing.

2.3 Image Setup

You can use the tool bar to optimize video brightness, contrast, and saturation.

2.4 Live View

Snapshot:

You can capture a still image shot by the camera and save it in your computer.

1.Press , and a snapshot window will appear.

2.Click “Save” to save the picture in your computer.

3.Click “Close” to return to the view page.

Digital Zoom in / out the image via the monitor window

7