ASUS MM17TG, MM17DE, MM17DE-B, MM17T User Manual

0 (0)

TABLE OF CONTENTS

 

IMPORTANT INFORMATION ---------------------------------------------------------

1

PRECAUTIONS ----------------------------------------------------------------------

2

SPECIAL NOTES --------------------------------------------------------------------

3

TAKE CARE OF THE MONITOR ------------------------------------------------

3

BEFORE YOU OPERATE THE MONITOR ----------------------------------------

4

FEATURES ----------------------------------------------------------------------------

4

PACKING LIST -----------------------------------------------------------------------

4

INSTALLATION INSTRUCTIONS ----------------------------------------------

5

ADJUSTING THE VIEWING ANGLE -------------------------------------------

7

OPERATING INSTRUCTIONS -------------------------------------------------------

8

GENERAL INSTRUCTIONS ------------------------------------------------------

8

HOW TO RECONFIGURE ---- --------------------------------------------------

9

OSD MENU TABLE ----------------------------------------------------------------

10

PLUG AND PLAY -------------------------------------------------------------------

12

TROUBLESHOOTING (FAQ) ---------------------------------------------------------

13

ERROR MESSAGE & POSSIBLE SOLUTION ----------------------------

14

APPENDIX ----------------------------------------------------------------------------------

15

SPECIFICATIONS -------------------------------------------------------------------

15

PRESET TIMING TABLE ----------------------------------------------------------

16

CONNECTOR PIN ASSIGNMENT ----------------------------------------------

17

IMPORTANT INFORMATION

Before operating the monitor, please read this User Guide thoroughly. This User Guide should be retained for future reference.

FCC Class B Radio Frequency Interference Statement

WARNING: (FOR FCC CERTIFIED MODELS)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2.Increase the separation between the equipment and receiver.

3.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4.Consult the dealer or an experienced radio/TV technician for help.

NOTICE:

1.The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

2.Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

3.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

As an ENERGY STARâ Partner our company has determined that this product meets the ENERGY STARâ guidelines for energy efficiency.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerous high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.

1

PRECAUTIONS

Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

Unplug the unit during a lightening storm or when it will not be used for long period of time. This will protect the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

Never push any object into the slot on the monitor cabinet. It may short circuit parts causing a fire or electric shock. Never spill liquids on the monitor.

Do not attempt to service the monitor by yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible.

2

SPECIAL NOTES

The following symptoms are normal with the monitor and do not indicate a problem.

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all the time.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.

When the screen becomes black or flashing, or cannot illuminate any more, contact your dealer or service center to replace parts. Don’t repair the screen by yourself!

TAKE CARE OF THE MONITOR

Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.

Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.

For maximum protection, repackage your monitor as it is originally packed in the factory.

To maintain cleanness of your LCD display, wipe it periodically with clean and soft cloth. The screen may be damaged by any liquid splash.

To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.

3

BEFORE YOU OPERATE THE MONITOR

FEATURES

43.2cm(17”) TFT Color LCD Monitor.

Recommended Resolutions: SXGA 1280 X 1024 @60Hz.

8ms (Tr+Tf) Quick Response Time.

SPLENDID™ Video Enhancement Technology.

5 Video Preset Modes Switiched by Hotkey

3 Skin-Tones Selection for Users’ Preference.

Microsoft Windows 95/98/2000/XP Compliance

VESA Display Data Channel (DDC)1/2B Compliance

VESA Wall Mount Compliance (100x100mm).

EPA ENERGY STAR® and Ergonomic Design.

Cabel Binder and Compact Case Design for Space Saving.

Both VGA and DVI-D Inputs. (for MM17T only)

1.2Wx2 Stereo Speakers / Earphone Jack. (for MM17T only)

PACKAGE LIST

The product package should include the following items:

1.LCD Monitor

2.Quick Start Guide

3.User Guide (CD)

4.Power Cord

5.VGA Cable

6.Audio Cable (for MM17T only)

4

ASUS MM17TG, MM17DE, MM17DE-B, MM17T User Manual

INSTALLATION INSTRUCTIONS

ASSEMBLING THE MONITOR BASE

Install

Remove

Figure 1

POWER CORD / POWER SOURCE

1.Make sure that the power cord is the correct type required in your area.

2.This LCD monitor has an internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)

3.Connect the power cord into your LCD monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet. The power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor.

NOTES

A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.

5

Loading...
+ 12 hidden pages