ASUS L7300 PROBE User Manual

0 (0)
ASUS L7300 PROBE User Manual

E334

PC Probe Setup

PC Probe is a convenient utility to monitor the computer system’s vital components. This is an optional software to help you monitor your Notebook PC.

NOTE: In order for PC Probe to run, Intel’s LDCM and other hardware monitoring programs cannot be installed.

Installation Procedure

1.Click on “PC Probe Setup” from the autorun.

2.Your system may require updating before installing, if so click OK and Yes to restart your computer.

3.Click “OK” after reading the welcome message.

4.Click the colored logo to install to the default directory. Click “Change Directory” if you wish to set a different destination.

5.Configure the settings if you desire (you can also make settings any time after you install PC Probe). The default setting runs a check on the system every 5 seconds for the Temperature and Voltage. Decreasing these values increases real-time accuracy but decreases system performance. Increasing these values produce the reverse effect. The “Run When Windows Starts” option is normally checked to start PC Probe upon entering Windows each time.

6.Click “OK” when the installation is completed. PC Probe will run automatically.

When PC Probe starts, a splash screen appears allowing you to “Show Monitor” or “Hide.” “Show Monitor” allows you to see PC Probe in action and make adjustments. Hide will place “PC Probe” in the background while monitoring your system. You can select whether you want the splash screen to show in the future by selecting or clearing the “Show this next time” box.

A yellow “doctor” will appear on the far right of the task bar indicating that PC Probe is running. Left clicking the yellow “doctor” will allow you to see your PC status.

2

Notebook PC User’s Manual

Loading...
+ 2 hidden pages