ASRock 939Dual-SATA2 User Manual

Size:
615.55 Kb
Download

939Dual-SATA2

User Manual

Version 1.1

Published July 2006 Copyright©2006 ASRock INC. All rights reserved.

1

Copyright Notice:

No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:

Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual.

With respect to the contents of this manual, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the manual or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

ASRock Website: http://www.asrock.com

2

 

Contents

 

1. Introduction ............................................................

5

1.1

Package Contents .....................................................................

5

1.2

Specifications ...........................................................................

6

1.3

Motherboard Layout .................................................................

8

1.4

ASRock 8CH I/O ........................................................................

9

2. Installation ..............................................................

10

Pre-installationPrecautions ...............................................................

10

2.1

CPU Installation .........................................................................

11

2.2

Installation of CPU Fan and Heatsink .......................................

11

2.3

Installation of Memory Modules (DIMM) ....................................

12

2.4Expansion Slots (Future CPU Port, PCI Slots, PCIE Slots, and AGP

 

Slot)

........................................................................................

14

2.5

Jumpers Setup ..........................................................................

16

2.6

Surround Display Feature .........................................................

16

2.7

Onboard Headers and Connectors ..........................................

17

2.8

Serial ATA (SATA) Hard Disks Installation ................................

20

2.9

Making a SATA Driver Diskette For SATA Operation in .............

 

 

“RAID” Mode. ............................................................................

20

2.10 SATA Operating in “non-RAID”Mode .......................................

21

2.11

SATAII Operating in “IDE” Mode ................................................

21

2.12

Making a SATAII Driver Diskette For SATAII Operation in .........

 

 

“SATA” Mode. ...........................................................................

21

3. BIOS SETUP UTILITY ...................................................

22

3.1

Introduction ...............................................................................

22

 

3.1.1 BIOS Menu Bar ...............................................................

22

 

3.1.2

Navigation Keys .............................................................

23

3.2

Main Screen ..............................................................................

23

3.3

Advanced Screen ....................................................................

24

 

3.3.1

CPU Configuration ..........................................................

25

 

3.3.2

Chipset Configuration .....................................................

27

 

3.3.3

ACPI Configuration .........................................................

28

 

3.3.4

IDE Configuration ............................................................

29

 

3.3.5

PCIPnP Configuration ......................................................

32

 

3.3.6

Floppy Configuration ......................................................

33

 

3.3.7

Super IO Configuration ...................................................

33

 

3.3.8

USB Configuration ..........................................................

35

3.4

Hardware Health Event Monitoring Screen .............................

35

3.5

Boot Screen ..............................................................................

36

 

3.5.1

Boot Settings Configuration ...........................................

36

3

3.6

Security Screen ........................................................................

37

3.7

Exit Screen ...............................................................................

38

4. Software Support ...................................................

39

4.1

Install Operating System ...........................................................

39

4.2

Support CD Information .............................................................

39

 

4.2.1

Running Support CD .......................................................

39

 

4.2.2

Drivers Menu ..................................................................

39

 

4.2.3

Utilities Menu ...................................................................

39

 

4.2.4

Contact Information ........................................................

39

APPENDIX: AMD’s Cool ‘n’ QuietTM Technology ......

40

4

1. Introduction

Thank you for purchasing ASRock 939Dual-SATA2 motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest memory and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com

1.1Package Contents

1 x ASRock 939Dual-SATA2 Motherboard

(ATX Form Factor: 12.0-inx9.6-in,30.5 cm x 24.4 cm) 1 x ASRock939Dual-SATA2 Quick Installation Guide

1 x ASRock 939Dual-SATA2 Support CD

1 x Ultra ATA 66/100/133 IDE Ribbon Cable (80-conductor)1 x3.5-inFloppy Drive Ribbon Cable

1 x Serial ATA (SATA) Data Cable (Optional)

1 x Serial ATA (SATA) HDD Power Cable (Optional)

1 x ASRock 8CH I/O Shield

5

1.2Specifications

Platform:

ATX Form Factor: 12.0-inx9.6-in,30.5 cm x 24.4 cm

CPU:

939-PinSocket Supporting AMD AthlonTM 64 / 64FX Processor

 

Supports AMD’s Cool ‘n’ QuietTM Technology (seeCAUTION 1)

Chipsets:

North Bridge:

 

ULi® M1695 chipset

 

For 939-PinCPU, FSB @ 1 GHz / 2.0 GT/s

 

South Bridge:

 

ULi® M1567 chipset, supports SATA 1.5Gb/s

Memory:

4 x DDR DIMM Slots:

 

4 DIMMs support PC3200 (DDR 400) / PC2700 (DDR 333) /

 

PC2100 (DDR 266), Max. 4GB

 

Dual Channel Memory Technology support (see CAUTION 2)

IDE:

IDE1: ATA 133 / Ultra DMA Mode 6

 

IDE2: ATA 133 / Ultra DMA Mode 6

 

Supports up to 4 IDE Devices

Serial ATA:

Supports up to 2 SATA devices at 1.5Gb/s data transfer rate

 

(No support for “Hot Plug” functions)

Serial ATA II:

1 SATA II device at 3.0Gb/s data transfer rate

 

(No support for “Hot Plug” functions)

Floppy Port:

Supports up to 2 Floppy Disk Drives

Audio:

7.1 channels AC’97 Audio

LAN:

Speed: 802.3u (10/100 Ethernet), Supports Wake-On-LAN

Hardware Monitor: CPU Temperature Sensing

 

Motherboard Temperature Sensing

 

CPU Overheat Shutdown to Protect CPU Life

 

(ASRock U-COP)(seeCAUTION 3)

 

CPU Fan Tachometer

 

Chassis Fan Tachometer

 

Voltage Monitoring: +12V, +5V, +3.3V, Vcore

Future CPU Port:

Supports CPU upgrade from AMD 939-PinCPU to other future

 

CPU, such as 940-PinCPU (M2)

 

(see page 14 for details)

PCI Slots:

3 x PCI Slots, PCI Specification 2.2

PCI EXPRESS Slots: 1 slot with PCIE x 16, 1 slot with PCIE x 1;

 

PCIE Specification 1.0a

AGP Slot:

1 x AGP Slot

 

Supports 1.5V, 8X / 4X AGP Card (see CAUTION 4)

USB 2.0:

8 USB 2.0 Ports:

 

4 Ready-to-UseUSB 2.0 Ports on the I/O Panel

 

Plus 2 On-BoardHeaders Supporting 4 Extra USB 2.0 Ports

 

(see CAUTION 5)

6

ASRock 8CH I/O: 1 PS/2 Mouse Port, 1 PS/2 Keyboard Port

 

1 Serial Port: COM1

 

1 Parallel Port (ECP/EPP Support)

 

4 Ready-to-UseUSB 2.0 Ports

 

1 RJ-45Port

 

Audio Jack: Side Speaker / Rear Speaker / Central/Bass /

 

Line In / Front Speaker / Microphone

 

(see CAUTION 6)

BIOS:

AMI Legal BIOS

 

Supports “Plug and Play”

 

ACPI 1.1 Compliance Wake Up Events

 

SMBIOS 2.3.1 Support

 

CPU Frequency Stepless Control

 

(only for advanced users’ reference, see CAUTION 7)

OS:

Microsoft® Windows® 2000 / XP / XP64-bitcompliant

CAUTION!

1.For power-saving’ssake, it is strongly recommended to enable AMD’s Cool ‘n’ QuietTM technology under Windows system. See APPENDIX on page 40 to enable AMD’s Cool ‘n’ QuietTM technology.

2.This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 12 for proper installation.

3.While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.

4.Do NOT use a 3.3V AGP card on the AGP slot of this motherboard! It may cause permanent damage!

5.Power Management for USB 2.0 works fine under Microsoft® Windows® XP SP1 / 2000 SP4.

6.For microphone input, this motherboard supports both stereo and mono modes. For audio output, this motherboard supports 2-channel,4-channel,6-channel,and8-channelmodes. Please check the table on page 9 for proper connection.

7.Although this motherboard offers stepless control, it is not recommended to perform over-clocking.Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU.

7

1.3 Motherboard Layout

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

 

 

5

6

 

 

 

7

 

8

 

 

 

 

 

 

 

 

 

 

 

24.4cm (9.6-in)

 

 

 

 

 

 

 

PS2_USB_PWR1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COM1

 

1

ATXPWR1

 

 

 

 

 

 

SOCKET

ChannelDual

DDR400

module)

module)

module)

module)

 

PARALLELPORT

ATX12V1

 

 

 

PS2

 

 

 

 

 

 

 

 

 

 

 

 

 

Mouse

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Keyboard PS2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INMICBASSCTR Bottom:Bottom: FRONTSPKSIDE Center:Center:

INLINESPKREAR

Top:Top:

 

 

 

 

 

 

 

939

CPUcoreDual

FSB1G

bit,(64/721DDR184-pin

bit,(64/72DDR2184-pin

bit,(64/723DDR184-pin

bit,(64/72DDR4184-pin

in)-(12.030.5cm

 

 

 

 

 

 

 

 

USB 2.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T: USB2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B: USB3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB 2.0

Top:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T: USB0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RJ-45

 

 

CPU_FAN1

 

 

 

 

 

 

 

 

 

 

B: USB1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

1

1

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

J3

J4

J7

J8

 

 

 

 

 

 

 

 

37

 

 

 

 

 

 

 

 

 

ULi

 

 

 

 

 

 

 

 

 

1

 

1

1

1

 

M1695

 

 

 

 

 

 

 

 

 

 

J1

J2

J5

J6

 

 

 

 

 

 

 

 

 

 

7.1CH

 

 

 

 

 

Chipset

 

 

 

 

 

 

 

 

CD1

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

36

 

 

 

FUTURE_CPU_PORT1

 

 

 

 

 

 

 

 

35

 

 

 

PCI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SATAII

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXPRESS

 

 

 

 

 

 

10

 

Super

I/O

 

 

 

 

 

 

 

 

 

SATAII_1

 

 

 

 

 

 

 

 

 

PCIE 1

 

 

 

 

 

 

 

 

JMB360

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

JMicron

 

 

 

 

 

1

 

J9

 

 

 

 

 

 

 

 

 

12

 

 

 

 

1

 

J10

 

 

 

 

 

 

 

 

 

 

34

 

1

J11

PCIE 2

 

 

 

 

 

 

 

 

 

 

 

SATA

 

33

 

 

 

 

 

 

 

 

939Dual-SATA2

ULi

 

 

 

SATA2

 

32

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M1567

 

 

 

 

13

31

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chipset

 

 

 

 

 

 

PHY

 

 

 

 

 

1.5V_AGP1

 

 

 

SATA1

 

 

LAN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AGP8X

 

 

 

 

 

 

 

14

30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PCI 1

 

 

 

ATA133

 

 

 

 

 

 

 

 

 

 

USB2.0

2Mb

IDE1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

BIOS

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CODEC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

29

 

 

 

 

 

PCI 2

 

 

 

IDE2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CMOS

 

 

 

 

 

 

16

 

 

 

 

 

 

 

 

 

 

Battery

CLRTC1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

28

 

 

 

 

 

PCI 3

 

 

 

 

 

 

 

 

 

 

 

JR1 JL1

 

GAME1

 

 

 

 

 

FLOPPY1

 

CHA_FAN1 SPEAKER1

 

 

 

 

 

 

 

 

 

IR1

 

 

USB45

USB67

 

 

1

PLED PWRBTN

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PANEL 1

 

 

 

1

 

 

 

1

 

 

1

1

 

 

 

1

 

 

 

AUDIO1

 

 

 

 

 

 

 

 

 

 

 

 

HDLED RESET

 

 

27

26

25

24

23

22 21

20 19 18

17

1

PS2_USB_PWR1 Jumper

 

 

 

19

Chassis Fan Connector (CHA_FAN1)

2

ATX Power Connector (ATXPWR1)

 

 

20

Clear CMOS Jumper (CLRTC1)

3

CPU Fan Connector (CPU_FAN1)

 

 

21

USB 2.0 Header (USB67, Blue)

4

ATX 12V Power Connector (ATX12V1)

 

22

USB 2.0 Header (USB45, Blue)

5

CPU Heatsink Retention Module

 

 

23

Flash Memory

 

6

939-PinCPU Socket

 

 

 

24

Floppy Connector (FLOPPY1)

7

2 x 184-pinDDR DIMM Slots

 

 

25

Infrared Module Header (IR1)

 

(Dual Channel A: DDR1, DDR2; Blue)

 

26

Game Port Header (GAME1)

8

2 x 184-pinDDR DIMM Slots

 

 

27

Front Panel Audio Header (AUDIO1)

 

(Dual Channel B: DDR3, DDR4; Black)

 

28

JR1 JL1 Jumper

 

9

North Bridge Controller

 

 

 

29

PCI Slots (PCI1- 3)

10

Serial ATAII Connector (SATAII_1, red)

 

30

AGP Slot (1.5V_AGP1)

11

JMicron JMB360 Chipset (PCIEX1 interface)

31

J9 / J10 Jumper

 

12

South Bridge Controller

 

 

 

32

PCI EXPRESS Slot (PCIE2)

13

Secondary Serial ATA Connector (SATA2)

 

33

J11 Jumper

 

14

Primary Serial ATA Connector (SATA1)

 

34

PCI EXPRESS Slot (PCIE1)

15

Primary IDE Connector (IDE1, Blue)

 

35

Future CPU Port (FUTURE_CPU_PORT1)

16

Secondary IDE Connector (IDE2, Black)

 

36

Internal Audio Connector: CD1 (Black)

17

System Panel Header (PANEL1)

 

 

37

J1-J8Jumpers

 

18

Chassis Speaker Header (SPEAKER 1)

 

 

 

 

 

8

1.4ASRock 8CH I/O

1

2

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

7

 

 

 

 

 

 

 

 

 

 

5

 

8

 

 

 

 

 

 

13

12

11

 

10

9

1

Parallel Port

 

8

Microphone (Pink)

2

RJ-45Port

 

9

USB 2.0

Ports (USB01)

3

Side Speaker (Gray)

 

10

USB 2.0

Ports (USB23)

4

Rear Speaker (Black)

 

11

Serial Port: COM1

5

Central / Bass (Orange)

 

12 PS/2 Keyboard Port (Purple)

6

Line In (Light Blue)

 

13

PS/2 Mouse Port (Green)

*7 Front Speaker (Lime)

*If you use 2-channelspeaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels

Front Speaker

Rear Speaker

Central / Bass

Side Speaker

 

(No. 7)

(No. 4)

(No. 5)

(No. 3)

2

V

--

--

--

4

V

V

--

--

6

V

V

V

--

8

V

V

V

V

9

2. Installation

939Dual-SATA2 is an ATX form factor(12.0-inx9.6-in,30.5 cm x 24.4 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installationPrecautions

Take note of the following precautions before you install motherboard components or change any motherboard settings.

Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.

1.Unplug the power cord from the wall socket before touching any component.

2.To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.

3.Hold components by the edges and do not touch the ICs.

4.Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component.

5.When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tightenthe screws! Doing so may damage the motherboard.

1 0