ASRock 4CORE1600-GLAN User Manual

0 (0)
4Core1600-GLAN
User Manual
Version 1.0
Published April 2008
Copyright©2008 ASRock INC. All rights reserved.
11
1
11
Copyright Notice:Copyright Notice:
Copyright Notice:Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means, except duplication of documentation by
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be regis-
tered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:Disclaimer:
Disclaimer:
Disclaimer:Disclaimer:
Specifications and information contained in this manual are furnished for informa-
tional use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warran-
ties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the manual or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate”
ASRock Website: http://www.asrock.com
22
2
22
ContentsContents
Contents
ContentsContents
1 Introduction1 Introduction
1 Introduction
1 Introduction1 Introduction
1.1 Package Contents .......................................................... 5
1.2 Specifications ................................................................. 6
1.3 Minimum Hardware Requirement Table f or Windows
VistaTM Premium 2007 and Basic Logo.......................... 9
1.4 Motherboard Layout........................................................ 10
1.5 ASRock 6CH I/O Pro...................................................... 11
2 Installation2 Installation
2 Installation
2 Installation2 Installation
2.1 Screw Holes ................................................................... 12
2.2 Pre-installation Precautions............................................ 12
2.3 CPU Installation.............................................................. 13
2.4 Installation of Heatsink and CPU fa n............................... 15
2.5 Installation of Memory Modules (DIMM) ......................... 16
2.6 Expansion Slots (PCI and PCI Express Slots) ..................... 18
2.7 Jumpers Setup ............................................................... 19
2.8 Onboard Headers and Connectors.................................. 20
2.9 HDMI_SPDIF Header Connection Guide......................... 24
2.10 SATAII Hard Disk Setup Guide ........................................ 25
2.11 Seri al ATA (SATA) / Serial ATAII (SATAII) Hard Disks
Installation...................................................................... 26
2.12 Driver Installation Guide .............................................. 26
2.13 Untied Overclocking Technology ................................... 26
3 BIOS S3 BIOS S
3 BIOS S
3 BIOS S3 BIOS S
ETUP UTILITYETUP UTILITY
ETUP UTILITY
ETUP UTILITYETUP UTILITY
3.1 Introduction..................................................................... 27
3.1.1 BIOS Menu Bar..................................................... 27
3.1.2 Navigation Keys .................................................... 28
3.2 Main Screen ................................................................... 28
3.3 Adva nced Screen ............................................................ 28
3.3.1 CPU Configuration ................................................ 29
3.3.2 Chipset Configuration ............................................ 31
3.3.3 ACPI Conf iguration................................................ 33
3.3.4 IDE Configuration .................................................. 34
3.3.5 PCIPnP Configuration ........................................... 36
3.3.6 Floppy Configuration ............................................. 37
3.3.7 Super IO Configuration .......................................... 37
3.3.8 USB Configuration ................................................ 38
3.4 Hardware Health Event Monitoring Screen...................... 39
3.5 Boot Screen ................................................................... 40
3.5.1 Boot Settings Configuration ................................... 41
......................................................................................................
...................................................
......................................................................................................
..........................................................................................................
.....................................................
..........................................................................................................
....................................................................................
..........................................
....................................................................................
5 5
5
5 5
®
12 12
12
12 12
27 27
27
27 27
33
3
33
3.6 Security Screen .............................................................. 41
3.7 Exit Screen .................................................................... 42
4 Software Support4 Software Support
4 Software Support
4 Software Support4 Software Support
4.1 Install Operating System ................................................ 43
4.2 Support CD Information ................................................... 43
4.2.1 Running Support CD ............................................. 43
4.2.2 Drivers Menu ......................................................... 43
4.2.3 Utilities Menu ........................................................ 43
4.2.4 Contact Information ............................................... 43
....................................................................................
..........................................
....................................................................................
43 43
43
43 43
44
4
44
Chapter 1 IntroductionChapter 1 Introduction
Chapter 1 Introduction
Chapter 1 IntroductionChapter 1 Introduction
Thank you for purcha sing ASRock 4Core1600-GLAN motherboard, a relia ble motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conf orming to ASRock’s commitment to qual­ity and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by­step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.
Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. www.asrock.com/support/index.asp
1.1 P1.1 P
ackack
1.1 P
1.1 P1.1 P
ASRock 4Core1600-GLAN Motherboard
(ATX Form Factor: 12.0-in x 8.6-in, 30.5 cm x 21.8 cm) ASRock 4Core1600-GLAN Quick Installation Guide ASRock 4Core1600-GLAN Support CD One 80-conductor Ultra ATA 66/100 IDE Ribbon Cable One Ribbon Cable for a 3.5-in Floppy Drive One Serial AT A (SA T A) Data Cable (Optional) One Serial ATA (SATA) HDD Power Cable (Optional) One HDMI_SPDIF Cable (Optional) One “ASRock 6CH I/O Pro” I/O Panel Shield
age Contentsage Contents
ack
age Contents
ackack
age Contentsage Contents
http://www.asrock.com
55
5
55
1.21.2
SpecificationsSpecifications
1.2
Specifications
1.21.2
SpecificationsSpecifications
Platform - ATX Form Factor: 12.0-in x 8.6-in, 30.5 cm x 21.8 cm
CPU - LGA 775 for Intel® CoreTM 2 Extreme / CoreTM 2 Quad / Core
2 Duo / Pentium® Dual Core / Celeron®, supporting Penryn Quad Core Yorkfield and Dual Core Wol fdale processors
- Compatible with all FSB1600/1333/1066/800MHz CPUs (see CAUTION 1)
- Supports Hyper-Threading Technology (see CAUTION 2)
- Supports Untied Overclocking Technology (see CAUTION 3)
- Supports EM64T CPU
Chipset - Northbridge: Intel® P31/G31
- Southbridge: Intel® ICH7
Memory - Dual Channel DDR2 Memory Te chnology (see CAUTION 4)
- 4 x DDR2 DIMM slots (see CAUTION 5)
- Support DDR2 800/667 non-ECC, un-buffered memory (see CAUTION 6)
- Max. capacity of system memory: 4GB (see CAUTION 7)
Hybrid Booster - CPU Frequency Stepless Control (see CAUTION 8)
- ASRock U-COP (see CAUTION 9)
- Boot Failure Guard (B.F.G.)
Expansion Slot - 1 x PCI Express x16 slot
- 2 x PCI Express x1 slots
- 3 x PCI slots
Audio - 5.1 CH Windows® VistaTM Premium Level HD Audio
(ALC662 Audio Codec)
LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s
- Realtek RTL81 1 1B/RTL81 11C
- Supports Wake-On-LAN
Rear Panel I/O ASRock 6CH I/O Pro
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x Serial Port: COM1
- 1 x Parallel Port (ECP/EPP Support)
- 4 x Ready-to-Use USB 2.0 Ports
- 1 x RJ-45 LAN Port
- HD Audio Ja ck: Line in/Front Speaker/Microphone
TM
66
6
66
Connector - 4 x Serial ATAII 3.0Gb/s connectors (No support for RAID and
“Hot Plug” functions) (see CAUTION 10)
- 1 x ATA100 IDE connector (supports 2 x IDE devices)
- 1 x Floppy connector
- 1 x DeskExpress Hot Plug Detection header
- 1 x HDMI_SPDIF header
- CPU/Chassis FAN connector
- 24 pin ATX power connector
- 4 pin 12V power connector
- CD in header
- Front panel audio connector
- 2 x USB 2.0 headers (support 3 USB 2.0 ports) (see CAUTION 11)
- 1 x WiFi/E header (see CAUTION 12)
BIOS Feature - 4Mb AMI BIOS
- AMI Legal BIOS
- Supports “Plug and Play”
- ACPI 1.1 Compliance Wake Up Events
- Supports jumperfree
- AMBIOS 2.3.1 Support
Support CD - Drivers, Utilities, AntiVirus Software (Trial Version) Hardware - CPU Temperature Sensing Monitor - Chassis Temperature Sensing
- CPU Fan Tachometer
- Chassis Fan Tachometer
- CPU Quiet Fan
- Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore
OS - Microsoft
®
Windows® 2000 / XP / XP 64-bit / Vista
TM
/
VistaTM 64-bit compliant
Certifications - FCC, CE, WHQL
* For detailed product information, please visit our website: http://www.asrock.com
WA R NING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
77
7
77
CAUTION!
1. FSB1600-CPU will operate in overclocking mode. Under this situation, PCIE frequency will also be overclocked to 120MHz. If you use a FSB1600­CPU on this motherboard, you need to adjust the jumpers. If you want to overclock the CPU you adopt from FSB800 to FSB1066, you need to adjust the jumpers as well. Please refer to page 19 for proper jumper settings.
2. About the setting of “Hyper Threading Technology”, please check page
30.
3. This motherboard supports Untied Overclocking Technology. Please read “Untied Overclocking Technology” on page 26 for details.
4. This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 16 for proper installation.
5. There are memory module installation limitations on this motherboard, please read “Installation of Memory Modules (DIMM)” on page 16 for details.
6. Please check the table below for the CPU FSB frequency and its corresponding memory support frequency.
CPU FSB Frequency Memory Support Frequency
1600 DDR2 800 1333 DDR2 667, DDR2 800 1066 DDR2 667, DDR2 800
800 DDR2 667, DDR2 800
7. Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows and Windows bit with 64-bit CPU, there is no such limitation.
8. Although this motherboard offers stepless control, it is not recom­mended to perform over-clocking. Frequencies other than the recom­mended CPU bus frequencies may cause the instability of the system or damage the CPU.
9. While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.
10. Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 25 to adjust your SATAII hard disk drive to SATAII mode. You can also connect SA TA hard disk to SATAII connector directly.
11. Power Management for USB 2.0 works fine under Microsoft® Windows VistaTM 64-bit / VistaTM / XP 64-bit / XP SP1 or SP2 / 2000 SP4.
®
VistaTM. For Windows® XP 64-bit and Windows® VistaTM 64-
®
XP
®
88
8
88
12. WiFi/E header supports WiFi+AP function with ASRock WiFi-802.11g or
WiFi-802.11n module, an easy-to-use wireless local area network
(WLAN) adapter. It allows you to create a wireless environment and
enjoy the convenience of wireless network connectivity. Please visit our
website for the availability of ASRock WiFi-802.11g or WiFi-802.11n
module. ASRock website
1.31.3
Minimum Hardware RMinimum Hardware R
1.3
Minimum Hardware R
1.31.3
Minimum Hardware RMinimum Hardware R
TMTM
TM
TMTM
VistaVista
Vista
VistaVista
For system integrators and users who purchase this motherboard and
plan to submit Windows® VistaTM Premium 2007 and Basic logo, please
follow below table for minimum hardware requirements.
CPU Celeron 420
Memory 1GB system memory (Premium)
VGA DX9.0 with WDDM Driver
* After June 1, 2007, all Windows
minimum hardware requirements in order to qualify for Windows
2007 logo.
Premium 2007 and Basic Logo Premium 2007 and Basic Logo
Premium 2007 and Basic Logo
Premium 2007 and Basic Logo Premium 2007 and Basic Logo
512MB Single Channel (Basic)
with 128bit VGA memory (Premium)
with 64bit VGA memory (Basic)
http://www.asrock.com
equirement Tequirement T
equirement T
equirement Tequirement T
®
VistaTM systems are required to meet above
able for Wable for W
able for W
able for Wable for W
indowsindows
indows
indowsindows
®
VistaTM Premium
®®
®
®®
99
9
99
1.4 Motherboard Layout1.4 Motherboard Layout
1.4 Motherboard Layout
1.4 Motherboard Layout1.4 Motherboard Layout
5
34
1
2
6
8
7
21.8cm (8.6in)
1
PS2_USB_PWR1
PS2
Mouse
Keyboard
PARALLEL PORT
ATX12V1
PS2
COM1
USB2.0 T:USB2 B:USB3
USB2.0
Top:
T: US B0
RJ-45
B:USB1
ATXPWR1
Bottom:
MICIN
Top:
LINEIN
Center:
FRONT
32
LAN
AUDIO CODEC
HD_AUDIO1
1
PHY
PCIE2
Super
I/O
PCIE3/DE
1
CD1
HDMI_SPDIF1
25
26
31
30
29
28
27
Intel
P31/G31
Chipset
PCI
EXPRESS
FD
1
PCIE1
Gigabit LAN
PCI1
PCI2
WIFI/E
PCI3
FLOPPY1
1
23
24
CPU_FAN1
Wolfdale
Yorkfield
RoHS
4Mb
BIOS
IR1
SPEAKER1
1
1
21
22
DDR2 800
QuadCore CPU
IDE1
DDRII_2(64 bit, 240-pin module)
DDRII_4(64 bit, 240-pin module)
DDRII_1(64 bit, 240-pin module)
DDRII_3(64 bit, 240-pin module)
Dual Channel
4Core1600-GLAN
CMOS
Battery
1
CLRCMOS1
Intel
11
USB6
1
USB4_5
181920
ICH7
17
SATAII_1(Port0)
SATAII_2(Port1)
PLEDPWRBTN
1
HDLED RESET
1516
SATAII_4(Port3)
SATAII_3(Port2)
SATAII
CHA_FAN1
PANEL1
30.5cm (12.0in)
9
10
11
12
13 14
1 PS2_USB_PWR1 Jumper 17 SATAII Connector (SATAII_1 (Port0)) 2 ATX 12V Connector (ATX12V1) 18 USB 2.0 Header (USB4_5, Blue) 3 ATX Power Connector (ATXPWR1) 19 USB 2.0 Header (USB6, Blue) 4 775-Pin CPU Socket 20 Flash Memory 5 North Bridge Controller 21 Chassis Speaker Header (SPEAKER 1) 6 CPU Fan Connector (CPU_FAN1) 22 DeskExpress Hot Plug Detection Header 7 2 x 240- p in DD R2 DI MM Sl o ts (IR1)
(Dual Channel A: DDRII_1, DDRII_3; Yellow) 23 Floppy Connector (FLOPPY1)
8 2 x 240-pin DDR2 DIMM Slots 2 4 HDMI_SPDIF Header (HDMI_SPDIF1)
(Dual Channel B: DDRII_2, DDRII_4; Orange) 25 Internal Audio Connector: CD1 (Black) 9 IDE1 Connector (IDE1, Blue) 26 Front Panel Audio Header (HD_AUDIO1) 10 Clear CMOS Jumper (CLRCMOS1) 27 WiFi/E Header (WIFI/E) 11 South Bridge Controller 28 PCI Slots (PCI1 - 3) 12 Chassis Fan Connector (CHA_FAN1) 29 PCI Express x1 Slot (PCIE3/DE) 13 SATAII Connector (SATAII_4 (Port3)) 30 PCI Express x1 Slot (PCIE2) 14 SATAII Connector (SATAII_3 (Port2)) 31 PCI Express x16 Slot (PCIE1) 15 System Panel Header (PANEL1) 32 FD Jumper 16 SATAII Connector (SATAII_2 (Port1))
1010
10
1010
1.51.5
ASRock 6CH I/O ProASRock 6CH I/O Pro
1.5
ASRock 6CH I/O Pro
1.51.5
ASRock 6CH I/O ProASRock 6CH I/O Pro
1
2
3
4
5
10
1 Parallel Port 6 USB 2.0 Ports (USB01) 2 RJ-45 Port 7 USB 2.0 Ports (USB23) 3 Line In (Light Blue) 8 Serial Port: COM1 4 Front Speaker (Lime) 9 PS/2 Keyboard Port (Purple) 5 Microphone (Pink) 10 PS/2 Mouse Port (Green)
* To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming. For Windows® XP: After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or
“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then reboot your system. For Windows After restarting your computer, please double-click “Realtek HD Audio Manager” on the system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device advanced settings”, choose “Make front and rear output devices playbacks two different audio streams simultaneously”, and click “ok”. Then reboot your system.
9
®
VistaTM:
8
7
6
1111
11
1111
Chapter 2 InstallationChapter 2 Installation
Chapter 2 Installation
Chapter 2 InstallationChapter 2 Installation
4Core1600-GLAN is an ATX form factor (12.0" x 8.6", 30.5 x 21.8 cm) motherboard.
Before you install the motherboard, study the configuration of your chassis to ensure
that the motherboard fits into it.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so may cause physical injuries to you and
damages to motherboard components.
2.1 Screw Holes2.1 Screw Holes
2.1 Screw Holes
2.1 Screw Holes2.1 Screw Holes
Place screws into the holes indicated by circles to secure the motherboard to the
chassis.
Do not over-tighten the screws! Doing so may damage the motherboard.
2.2 Pre-installation Precautions2.2 Pre-installation Precautions
2.2 Pre-installation Precautions
2.2 Pre-installation Precautions2.2 Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity, NEVER
place your motherboard directly on the carpet or the like. Also remember to use
a grounded wrist strap or touch a safety grounded object before you handle
components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals,
and/or components.
1212
12
1212
2.3 CPU Installation2.3 CPU Installation
2.3 CPU Installation
2.3 CPU Installation2.3 CPU Installation
For the installation of Intel 775-LAND CPU,
please follow the steps below.
Before you insert the 775-LAND CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
Step 1. Open the socket:
Step 1-1. Disengaging the lever by depressing
down and out on the hook to clear
retention tab.
Step 1-2. Rotate the load lever to fully open po-
sition at approximately 135 degrees.
Step 1-3. Rotate the load plate to fully open po-
sition at approximately 100 degrees.
775-Pin Socket Overview
Step 2. Insert the 775-LAND CPU:
Step 2-1. Hold the CPU by the edges where are
marked with black lines.
Step 2-2. Orient the CPU with IHS (Integrated
Heat Sink) up. Locate Pin1 and the two
orientation key notches.
Pin1
orientation
key notch
775-LAND CPU
orientation
key notch
1313
13
1313
Pin1
alignment key
black line
775-Pin Socket
black line
alignment key
Loading...
+ 30 hidden pages