Sno-Thro®
Parts Manual
Models
924119 -1028
924120 -1024
924333 -1024
924334 -1128
924502 -1332
924503 -1336
924504 - 936
02487800D 2/01 Supercedes 02487800, A,B,C Printed in USA
THE MANUAL
Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance.
For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals.
Hardware descriptions are given in decimals.
Decimals to Fractions
.063 |
1/16 |
|
.563 |
9/16 |
|
|
|
|
|
.125 |
1/8 |
|
.625 |
5/8 |
|
|
|
|
|
.188 |
3/16 |
|
.688 |
11/16 |
|
|
|
|
|
.250 |
1/4 |
|
.750 |
3/4 |
|
|
|
|
|
.313 |
5/16 |
|
.813 |
13/16 |
|
|
|
|
|
.375 |
3/8 |
|
.875 |
7/8 |
|
|
|
|
|
.438 |
7/16 |
|
.938 |
15/16 |
|
|
|
|
|
.500 |
1/2 |
|
1.00 |
1 |
|
|
|
|
|
SERVICE AND REPLACEMENT PARTS
When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine.
Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit.
•Record Unit Model and Serial numbers here:
•Record Engine Model and Serial numbers here:
PRODUCT REGISTRATION
A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored..
YOUR SATISFACTION IS IMPORTANT
Questions? Please follow these helpful steps:
1.Refer to the manuals supplied with your unit.
They will guide you through safe and proper operation and maintenance.
They contain specifications on your unit.
If your questions are not answered in these manuals, go to step number two.
2.Contact Your Dealer.
Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency.
A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original.
If your questions are not resolved by the support staff, ask for the manager or owner.
When contacting your Dealer supply your model and serial numbers.
TO SPEED PARTS ORDERING:
1.Know the model and serial numbers of your unit.
2.Know the part number required.
3.Know the quantity required.
4.Know the part description.
UNAUTHORIZED REPLACEMENT PARTS
Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts.
2
MODELS
Domestic
Model 924119 (1028)
10 H.P. 28” Sno-Thro Serial No. 000101 and up
Model 924120 (1024)
10 H.P. 24” Sno-Thro Serial No. 000101 and up
International
Model 924333 (1024)
10 H.P. 24” Sno-Thro Serial No. 000101 and up
Model 924334 (1128)
11 H.P. 28” Sno-Thro Serial No. 000101 and up
Global
Model 924502 (1332)
13 H.P. 32” Sno-Thro Serial No. 000101 and up
Model 924503 (1336)
13 H.P. 36” Sno-Thro Serial No. 000101 and up
Model 924504 (936)
9 H.P. 36” Sno-Brush Serial No. 000101 and up
TABLE OF CONTENTS
DECALS
Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ENGINE AND DRIVE
Engine and Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . |
6 |
MAIN FRAME
Speed Selector and Frame . . . . . . . . . . . . . . . . . . . . 8
Wheels and Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Reduction Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Friction Wheel Drive . . . . . . . . . . . . . . . . . . . . . . . . . 13
OPERATORS CONTROLS
Handlebar and Controls . . . . . . . . . . . . . . . . . . . . . . 14
Headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
BLOWER
Auger and Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Gear Case-Aluminum. . . . . . . . . . . . . . . . . . . . . . . . 21
Gear Case-Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . 22
Discharge Chute Crank . . . . . . . . . . . . . . . . . . . . . . 24
Electric Discharge Chute . . . . . . . . . . . . . . . . . . . . . 26
BRUSH
Brush Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Brush Drive Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ELECTRICAL SYSTEMS
Continuity Diagram (333, 334) . . . . . . . . . . . . . . . . . 32 Wiring Diagram (333, 334) . . . . . . . . . . . . . . . . . . . . 33 Continuity Diagram (502, 503) . . . . . . . . . . . . . . . . . 34 Wiring Diagram (502, 503)) . . . . . . . . . . . . . . . . . . . 35 Continuity & Wiring Diagrams (119, 120, 504). . . . . 36
3 |
© Copyright 2000, 2001 Ariens Company |
DECALS
Model 924119, 120, 333, 334, 502, 503
1
2
08084300A
4 |
3 |
7 |
|
6 |
7 |
5
7
8
PS0414
Item |
Part No. |
Qty. |
Description |
1 |
08085000 |
1 |
Decal-Dash 1028 (119) |
|
08084900 |
1 |
Decal1024 Dash (120) |
|
08085300 |
1 |
Decal1024/1128 Dash (333, 334) |
|
08085100 |
1 |
Decal1332/1336 Dash (502, 503) |
|
08084800 |
1 |
Decal936 Dash (504) |
2 |
08084200 |
1 |
Decal1024 Front Panel (120, 333) |
|
08084300 |
1 |
Decal1028 Front Panel (119) |
|
08084400 |
1 |
Decal1128 Front Panel (334) |
|
08084500 |
1 |
Decal1332 Front Panel (502) |
|
08084600 |
1 |
Decal1336 Front Panel (503) |
3 |
07746400 |
1 |
Decal-Ariens Jewel |
4 |
07733900 |
1 |
Decal-Primer |
5 |
07797600 |
1 |
DecalCast Iron Bore |
6 |
07751100 |
1 |
Decal-A+ |
7 |
62447800 |
1 |
Decal-Set-Danger (119, 120, 333, 334, 502, 503) |
8 |
07864400 |
1 |
Decal-Differential Lock (120, 333, 334, 502, 503) |
|
|
|
|
|
|
|
4 |
DECALS
Model 924504
2
1
936
Power Brush
CAUTION / PRUDENCE / CUIDADO
Engage traction drive clutch before attachment clutch. Enclencher l'embrayage de traction avant l'embrayage de l'outil.
Activar el embrague de la transmisión de dirección de la tracción antes del embrague del accesorio.
|
|
08084700A |
08084800 |
CAUTION / PRUDENCE / CUIDADO |
7 |
|
|
|
Read the operator’s manual. |
|
|
|
Lire le manuel d’utilisation. |
|
4 |
|
Leer el manual del operador. |
|
|
Adjust brush height before operating. |
|
|
|
|
Régler la hauteur du balai avant l’utilisation. |
|
3 |
|
Ajustar la altura de la escobilla antes de ponerla en |
|
6 |
funcionamiento. |
|
|
Engage traction drive clutch before attachment clutch. |
|||
|
Enclencher l’embrayage de traction avant l’embrayage |
||
|
|
de l’outil. |
|
|
|
Activar el embrague de la transmisión de dirección |
|
|
|
del tractor antes del embrague del accesorio. |
|
|
|
Operating on irregular terrain could cause the brush |
|
|
|
to dig in and drive the machine rearward. |
|
|
|
Le balai risque de se planter dans le sol et d’entraîner |
|
|
|
la machine vers l’arrière lors d’utilisation sur terrain |
|
|
|
accidenté. |
|
|
|
El uso en terreno irregular puede hacer que la escobilla |
|
|
|
se entierre y hacer que la unidad se desplace hacia |
|
|
|
atrás. |
07873100B |
5
07797600
078644A
8
PS0870
Item |
Part No. |
Qty. |
Description |
|
1 |
08084800 |
1 |
Decal936 |
Dash |
2 |
08084700 |
1 |
Decal936 |
Front Panel |
3 |
07746400 |
1 |
Decal-Ariens Jewel |
|
4 |
07733900 |
1 |
Decal-Primer |
|
5 |
07797600 |
1 |
DecalCast Iron Bore |
|
6 |
07751100 |
1 |
Decal-A+ |
|
7 |
07873100 |
1 |
Decal, Caution |
|
8 |
07864400 |
1 |
Decal-Differential Lock |
5
ENGINE AND BELT DRIVE
Model 924119, 120, 333, 334, 502, 503, 504
|
51 |
|
|
49 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
48 |
|
|
|
|
|
|
|
|
|
|
|
|
|
50 |
|
|
43 |
|
|
|
|
|
|
|
1 |
|
|
5 |
|
|
|
11 |
|
|
|
|
|
6 |
|
|
|
|
|||
|
54 |
|
|
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
55 |
|
8 |
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
47 |
|
46 |
|
|
|
10 |
|
|
|
|
|
|
4 |
|
|
|
|
|
||
|
|
|
56 |
|
|
|
|
|
|
|
|
|
|
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
53 |
|
|
14 |
|
|
|
15 |
|
|
|
|
|
|
|
|
|
17 |
|
||
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
44 |
|
|
|
|
|
|
23 |
30 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
29 28 |
|
26 |
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
|
5 |
22 |
|
|
|
|
|
|
|
31 |
|
|
|
20 |
||
|
|
|
|
32 |
|
|
|
21 |
|
|
|
|
|
|
|
|
|
27 |
26 |
||
|
|
|
|
33 |
|
|
22 |
|||
|
|
|
|
|
|
|
|
25 |
||
|
|
|
|
34 |
|
|
37 |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
35 |
|
|
|
39 |
|
|
|
|
|
|
52 |
|
|
|
|
||
|
|
|
|
|
36 |
|
|
|
||
|
|
|
|
|
|
|
38 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
40 |
|
|
|
|
|
|
|
|
|
|
45 |
|
|
Item |
Part No. |
Qty. |
Description |
|
|
|
|
|
|
|
1 |
06529800 |
1 |
Nut-Locking-Center .31-18 |
|
|
|
|
|
|
|
2 |
06310500 |
1 |
Washer-Lock Internal .31 |
|
|
|
|
|
|
|
3 |
08262200 |
1 |
Engine, 10HP L Head Tecumseh - 120 Volt (119) |
|
|
|||||
|
08260700 |
1 |
Engine, 10HP OHV Tecumseh120 Volt (120) |
|
|
|
||||
|
08260800 |
1 |
Engine, 10HP OHV Tecumseh12 Volt (333) |
|
|
|
||||
|
08261000 |
1 |
Engine, 11HP Tecumseh OHV 12 Volt (334) |
|
|
|
||||
|
08261100 |
1 |
Engine, 13HP Tecumseh 12 Volt (502, 503) |
|
|
|
||||
|
08261200 |
1 |
Engine, 9HP Tecumseh OHV (504) |
|
|
|
|
|
||
4 |
02410900 |
1 |
Belt Finger |
|
|
|
|
|
|
|
5 |
06435700 |
5 |
Washer-Flat-Steel .38 x .875 x .083 |
|
|
|
|
|
||
6 |
06308600 |
2 |
Washer-Locking .31 x .078 |
|
|
|
|
|
|
|
7 |
05947300 |
2 |
Bolt-Hex .31-24 x .75 Grade 5 |
|
|
|
|
|
|
|
8 |
06005500 |
4 |
Screw-Set .31-18 x .38 |
|
|
|
|
|
|
|
9 |
02489100 |
1 |
Engine Sheave (119, 120, 333, 334, 502, 504) |
|
|
|||||
|
02435700 |
1 |
Engine Sheave (503) |
|
|
|
|
|
|
12
11
13
19
8
18
16
24
5
23
41
42
PS0448
6
|
|
|
ENGINE AND BELT DRIVE |
|
|
|
Model 924119, 120, 333, 334, 502, 503, 504 |
Item |
Part No. |
Qty. |
Description |
10 |
06601800 |
1 |
Key-Straight .25 x 1.75 x .25 |
11 |
07412000 |
2 |
Screw-Tap .25-20 x .50 |
12 |
02489000 |
1 |
Belt Cover |
13 |
07238500 |
1 |
V-Belt (119) |
|
07238400 |
1 |
V-Belt (120, 333, 334, 504) |
|
07238300 |
1 |
V-Belt (502) |
|
07236200 |
1 |
V-Belt (503) |
14 |
07325700 |
1 |
Pulley-V 8.40 x 1.0 with Key |
15 |
07211200 |
1 |
V-Belt -Traction Drive (119, 120, 333, 334, 504) |
|
07236100 |
1 |
V-Belt -Traction Drive (502, 503) |
16 |
07005300 |
3 |
Bolt-Serrated Round Head Slotted .31-18 x .75 (503) |
17 |
07307000 |
1 |
Pulley-V 9.0 x 1.25 |
18 |
02438900 |
1 |
Hub (119, 120, 333, 334, 502, 503)) |
19 |
05947900 |
2 |
Bolt-Hex .25-20 x .50 Grade 5 (120, 333, 334, 502, 503, 504) |
20 |
06529700 |
2 |
Nut-Locking-Center .25-20 (120, 333, 334, 502, 503, 504) |
21 |
02423651 |
1 |
Belt Retainer (120, 333, 334, 502, 503, 504) |
22 |
06529800 |
2 |
Nut-Locking Center .31-18 |
23 |
05947500 |
2 |
Bolt-Hex .31-18 x 1.25 Grade 5 |
24 |
02434851 |
1 |
Idler Arm |
25 |
01213100 |
1 |
Bearing Spacer |
26 |
02457400 |
2 |
Idler |
27 |
06437200 |
1 |
Washer-Flat-Steel .344 x .688 x .065 |
28 |
01103100 |
1 |
Spacer |
29 |
02453751 |
1 |
Idler Arm |
30 |
06530300 |
1 |
Nut-Locking-Nylon .625-18 |
31 |
01026000 |
1 |
Wave Washer |
32 |
06436500 |
1 |
Washer-Flat-Steel .382 x .812 x .023 |
33 |
06707000 |
1 |
Pin-Cotter .09 x 1.00 |
34 |
08309400 |
1 |
Spring-Tension .80 x .73 x 3.06 |
35 |
05503700 |
1 |
Bushing-Flange-Nylon .500 x .625 x .312 x .750 |
36 |
02442800 |
1 |
Activating Shaft |
37 |
08317200 |
1 |
Spring-Tens .047 x .44 x 3.37 |
38 |
07412100 |
2 |
Screw-Tapping 10-24 x .375 |
39 |
02435300 |
1 |
Return Clip |
40 |
06707400 |
1 |
Pin-Cotter .09 x .50 |
41 |
02434751 |
1 |
Bracket |
42 |
02435400 |
1 |
Pin-Clevis |
43 |
02411000 |
1 |
Belt Finger |
44 |
06530400 |
3 |
Nut-Locking-Flange .312-18 (503) |
45 |
07411600 |
3 |
Screw-Tap .25-20 x .37 |
46 |
06306800 |
1 |
Washer-Lock-External .262 x .502 x .026 (503) |
47 |
06533200 |
1 |
Nut-Hex .25-20 (503) |
48 |
02483100 |
1 |
Cord-Extension-110V (119, 120) |
49 |
21533500 |
1 |
Plug-Spark |
50 |
07531800 |
1 |
Fuel Cap |
51 |
07532000 |
1 |
Key, Push/Pull-Tecumseh (119, 120) |
52 |
05502100 |
1 |
Bushing-Flange .500 x.625 x.500 x.750 |
53 |
07533200 |
1 |
Boot, Eyelet Terminal(333, 334, 502, 503) |
54 |
06436700 |
1 |
Washer-Flat-Steel .323 x .625 x .062 |
55 |
06529200 |
3 |
Nut-Hex .312-18 |
56 |
06307400 |
3 |
Washer-Locking .312 x .097 Heavy |
7
SPEED SELECTOR AND FRAME
Model 924119, 120, 333, 334, 502, 503, 504
2
4 |
5 |
|
|
||
6 |
7 |
|
8 |
||
9 |
||
|
||
10 |
11 |
|
|
||
14 |
12 |
|
|
||
|
30 |
31 |
13 |
|
|
15 |
|
|
16 |
|
|
28 |
|
|
18 |
27 |
17 |
|
|
|
7 |
|
|
|
|
21 |
|
|
22 |
26 |
|
29 |
|
|
19
24
24
1
3
23
20
25
PS0485
8
SPEED SELECTOR AND FRAME
|
|
|
Model |
924119, 120, 333, 334, 502, 503, 504 |
Item |
Part No. |
Qty. |
Description |
|
1 |
07516700 |
1 |
Hole Plug |
|
2 |
05708600 |
2 |
Ring-Retainer-External .500 x .015 |
|
3 |
07509600 |
1 |
Knob |
|
4 |
02444851 |
1 |
Rod |
|
5 |
08318400 |
1 |
Spring, Tension .055 x .33 x 1.31 |
|
6 |
05947700 |
1 |
Bolt-Hex .25-20 x 1.00 |
|
7 |
06529800 |
1 |
Nut-Locking-Center .312-18 |
|
8 |
02462600 |
1 |
Pivot |
|
9 |
06529700 |
1 |
Nut-Locking-Center .25-20 |
|
10 |
05948000 |
1 |
Bolt-Hex .31-18 x 3.50 |
|
11 |
06713500 |
2 |
Pin-Hair Internal .08 x .18 x 1.18 |
|
12 |
02487600 |
1 |
Rod, Shift-Upper |
|
13 |
02487700 |
1 |
Rod, Shift-Lower |
|
14 |
02477900 |
1 |
Pivot, Rod |
|
15 |
06706900 |
1 |
Pin-Cotter .09 x .75 |
|
16 |
06436500 |
1 |
Washer-Flat-Steel .382 x .812 x .023 |
|
17 |
01215100 |
1 |
Clevis Pin .370/.375 x .688 |
|
18 |
02476300 |
1 |
Arm, Shift |
|
19 |
02485359 |
1 |
Main Frame |
|
20 |
02401800 |
2 |
Bolt Strap (119, 120, 333, 334, 504) |
|
|
02483500 |
2 |
Bolt Strap (502, 503) |
|
21 |
05531500 |
1 |
Bushing-Sleeve .328 x .50 x .75 |
|
22 |
05947500 |
1 |
Bolt-Hex .31-18 x 1.25 Grade 5 |
|
23 |
07411600 |
2 |
Screw-Tapping .250-20 x .37 Hex Washer Head |
|
24 |
07411500 |
4 |
Screw-Tapping .31-18 x .50 Hex Washer Head |
|
25 |
02477159 |
1 |
Cover, Bottom |
|
26 |
06437200 |
1 |
Washer-Flat-Steel .344 x .688 x .065 |
|
27 |
06441900 |
1 |
Washer-Flat-Steel .531 x 1.06 x .095 |
|
28 |
06707300 |
1 |
Pin-Cotter .12 x .75 |
|
29 |
07028500 |
2 |
Bolt-Hex Flanged Whiz Lock Head .38-16 x .75 |
|
30 |
06219800 |
2 |
Bolt-Round Head Square Neck .25-20 x 1.00 Grade 5 |
|
31 |
06537500 |
2 |
Nut-Locking Wing .25-20 |
|
9
WHEELS AND AXLE
Model 924119
12 |
|
1 |
|
|
|
|
|
|
|
3 |
8 |
|
|
13 |
|
|
14 |
|
|
2 |
|
10 |
|
|
|
8 |
|
|
|
|
11 |
|
|
7 |
|
|
|
9 |
|
|
|
6 |
|
|
|
5 |
|
|
|
33 |
|
|
10 |
8 |
|
|
4 |
|
|
|
|
|
|
|
11 |
|
|
13 |
|
|
|
8 |
|
9 |
PS0800 |
|
|
Model 924120, 333, 334, 502, 503, 504
|
|
18 |
|
16 |
|
|
27 |
|
|
19 |
|
|
3 |
28 |
|
14 |
23 |
||
|
22 |
29 |
|
|
|
21 |
|
|
|
20 |
|
15 |
|
|
|
|
|
|
31 |
|
|
|
30 |
|
|
|
26 |
|
|
25 |
|
35 |
37 |
32 |
24 |
|
|||
|
36 |
|
|
|
|
|
34
38
17
39
33
PS0790
10
|
|
|
WHEELS AND AXLE |
|
|
|
Model 924119, 120, 333, 334, 502, 503, 504 |
Item |
Part No. |
Qty. |
Description |
1 |
07150300 |
2 |
Tire/Wheel Assembly 16 x 6.50 - 8 (119) |
2 |
07150500 |
2 |
Wheel 6.50 x 8.00 (119) |
3 |
07121800 |
2 |
Tire 4.80-8 (120, 333) |
|
07121600 |
2 |
Tire 16 x 6.50-8 (119, 334, 502, 503, 504) |
4 |
02483200 |
1 |
Shaft, Axle (119) |
5 |
05718400 |
1 |
Ring, Retaining .875 x .050 (119) |
6 |
02439600 |
1 |
Spur Gear (119) |
7 |
06600800 |
1 |
Woodruff Key .25 x .875 x .375 (119) |
8 |
06436900 |
4 |
Washer-Flat-Steel .88 x 1.25 x .062 (119) |
9 |
00301700 |
2 |
Bearing Flange (119) |
10 |
05409300 |
2 |
Bearing, Ball .88 x 1.75 x .50 (119) |
11 |
01014200 |
2 |
Flange, Bearing (119) |
12 |
07053700 |
2 |
Pin-Lock .31 x 1.75 (119) |
13 |
06529700 |
6 |
Nut-Locking-Center .25-20 (119) |
14 |
07103700 |
2 |
Tube 4.00 x 8 (120, 333) |
|
07108700 |
2 |
Tube 6.50 x 8 (119, 334, 502, 503, 504) |
15 |
07107600 |
2 |
Wheel 4.80-8 (120, 333) |
|
07107700 |
2 |
Wheel 6.50-8 (334, 502, 503, 504) |
16 |
07121900 |
2 |
Tire/Wheel Assembly #34-4.80/4.00 x 8 (120, 333) |
|
07121700 |
2 |
Tire/Wheel Assembly #35-16 x 6.50 (334, 502, 503, 504) |
17 |
02437151 |
1 |
Axle-Right Hand (502, 503) |
|
02440951 |
1 |
Axle-Right Hand (120, 333, 334, 504) |
18 |
52405400 |
AR |
Axle Assembly-Left Hand (Contains Items 19-23) (502, 503) |
|
52405500 |
AR |
Axle Assembly-Left Hand (Contains Items 19-23) (120, 333, 334, 504) |
19 |
02437051 |
1 |
Axle-Left Hand (502, 503) |
|
02441051 |
1 |
Axle-Left Hand (120, 333, 334, 504) |
20 |
05505700 |
1 |
Bushing-Sleeve .750 x .814 x .750 (120, 333, 334, 502, 503, 504) |
21 |
06307000 |
1 |
Washer-Locking .250 x .047 (120, 333, 334, 502, 503, 504) |
22 |
07012600 |
1 |
Fitting-Lube .25-28 x .256 (120, 333, 334, 502, 503, 504) |
23 |
05502900 |
1 |
Bushing-Sleeve .562 x .625 x .625 (120, 333, 334, 502, 503, 504) |
24 |
52405900 |
1 |
Lockout Hub Assembly (Contains Items 25-27, 30, 31) (120, 333, 334, 502, 503, 504) |
25 |
01037400 |
1 |
Pin (120, 333, 334, 502, 503, 504) |
26 |
08300700 |
1 |
Spring-Compression .028 x.34 x 1.062 (120, 333, 334, 502, 503, 504) |
27 |
01037200 |
1 |
Lockout Hub (120, 333, 334, 502, 503, 504) |
28 |
05948100 |
1 |
Screw-Cap .25-20 x 2.00 Grade 8 (120, 333, 334, 502, 503, 504) |
29 |
06530900 |
1 |
Nut-Jam-Nylon .250-20 (120, 333, 334, 502, 503, 504) |
30 |
05803200 |
1 |
Pin-Roll .093 x 1.00 (120, 333, 334, 502, 503, 504) |
31 |
01037500 |
1 |
Knob (120, 333, 334, 502, 503, 504) |
32 |
52405300 |
1 |
Differential Assembly (120, 333, 334, 502, 503, 504) |
33 |
05803000 |
1 |
Pin Roll .188 x 1.50 |
34 |
07412200 |
8 |
Screw-Tap .50-20 x .62 Hex Head (120, 333, 334, 502, 503, 504) |
35 |
02457859 |
2 |
Bearing Retainer (120, 333, 334, 502, 503, 504) |
36 |
05417700 |
2 |
Bearing-Ball 1.13 x 2.19 x .63 (120, 333, 334, 502, 503, 504) |
37 |
06437400 |
2 |
Washer-Flat-Steel 1.140 x 1.718 x .134 |
38 |
07028600 |
8 |
Bolt Serrated Neck Slotted .25-20 x .50 |
39 |
06530100 |
8 |
Nut-Locking-Flange .250-20 |
11
REDUCTION DRIVE
Model 924119, 120, 333, 334, 502, 503, 504
|
|
|
|
|
|
7 |
5 |
|
|
|
|
|
|
10 |
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
4 |
|
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 |
|
|
|
3 |
|
|
|
11 |
|
|
|
|
|
|
|
17 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
12 |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
16 |
|
|
|
23 |
|
|
|
14 |
|
|
|
13 |
|
1 |
22 |
|
|
|
|
|
22 |
|||
|
|
|
|
|
14 |
|
|
|
|
|
|
|
|
|
|
|
|
|
24 |
15 |
|
|
21 |
|
|
|
|
|
|
||
|
|
|
14 |
|
|
|
20 |
|
|
|
|
|
|
19 |
|
|
|
|
|
|
18 |
|
|
|
|
|
|
|
|
|
PS0463 |
Item |
Part No. |
Qty. |
Description |
|
|
|
|
1 |
02477300 |
1 |
Hex Shaft |
|
|
|
|
2 |
06437200 |
2 |
Washer-Flat-Steel .344 x .688 x .065 |
|
|||
3 |
02476800 |
1 |
Hex Shaft |
|
|
|
|
4 |
05531600 |
1 |
Spacer .450 x .75 x 1.60 |
|
|
|
|
5 |
06436600 |
1 |
Washer-Flat-Steel .505 x .880 x .072 |
|
|||
6 |
00308500 |
1 |
Bearing Flange |
|
|
|
|
7 |
05435200 |
1 |
Bearing-Ball .437 x 1.375 x .437 |
|
|
||
8 |
02414100 |
1 |
Bearing Flange |
|
|
|
|
9 |
06530600 |
4 |
Nut-Locking Dual Face 10-24 |
|
|
||
10 |
06536400 |
1 |
Nut-Locking-Center .438-14 |
|
|
||
11 |
05718300 |
1 |
Ring-Retaining External .31 x .025 |
|
|||
12 |
07530500 |
1 |
Idler |
|
|
|
|
13 |
06529800 |
1 |
Nut-Locking-Center .31-18 |
|
|
||
14 |
06436100 |
6 |
Washer-Flat-Steel .630 x 1.005 x .062 |
|
|||
15 |
02436700 |
1 |
Pinion Shaft |
|
|
|
|
16 |
02477700 |
1 |
Roller Chain #41-34 Pitches |
|
|
||
17 |
07029700 |
1 |
Drive Fitting-Hydraulic |
|
|
|
|
18 |
05802900 |
1 |
Pin Roll .156 x 1.00 |
|
|
|
|
19 |
05800900 |
1 |
Pin, Roll .125 x 1.00 |
|
|
|
|
20 |
52403200 |
1 |
Pinion and Sprocket Assembly (Contains Items 21, 22) |
||||
21 |
02436800 |
1 |
Pinion and Sprocket |
|
|
|
|
22 |
05502600 |
2 |
Bushing-Flange .625 x .750 x .50 x .875 |
|
|||
23 |
06435700 |
2 |
Washer-Flat-Steel .38 x .875 x .083 |
|
|||
24 |
06536100 |
1 |
Nut, Jam .31-18 |
|
|
|
|
12