Loading...
ZT HD
Owner/Operator Manual
Manuel Du Propriétaire/Utilisateur
Models
991082 – ZT HD48
(Serial No. 010000 and up)
991083 – ZT HD52
(Serial No. 010000 and up)
991084 – ZT HD60
(Serial No. 010000 and up)
991090 – ZT HD44
(Serial No. 010000 and up)
991091 – ZT HD60
(Serial No. 000101 and up)
Gasoline containing up to 10% ethanol (E10) or up to 10% MTBE (methyl tertiary butyl ether) is acceptable for use in this machine.
The use of any gasoline exceeding 10% ethanol (E10) or 10% MTBE will void the product warranty.
Il est possible d’utiliser de l’essence contenant jusqu’à 10% d’éthanol (E10) ou 10% de MTBE (éther méthyl-tertiobutylique) sur cette machine.
L’utilisation d’une essence contenant plus de 10% d’éthanol (E10) ou de 10% de MTBE annulent la garantie.
|
ENGLISH |
04414600 |
11/11 |
|
|
||
|
FRANÇAIS |
Printed in USA |
|
|
|||
|
|
|
|
TABLE OF CONTENTS
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . |
. 4 |
Storage . . . . . . . . . . . . . . . . . . . . . . . . . |
32 |
Assembly . . . . . . . . . . . . . . . . . . . . . . . |
12 |
Accessories . . . . . . . . . . . . . . . . . . . . . |
32 |
Controls and Features. . . . . . . . . . . . . |
13 |
Service Parts . . . . . . . . . . . . . . . . . . . . |
32 |
Operation . . . . . . . . . . . . . . . . . . . . . . . |
14 |
Specifications . . . . . . . . . . . . . . . . . . . |
33 |
Maintenance Schedule . . . . . . . . . . . . |
19 |
Warranty . . . . . . . . . . . . . . . . . . . . . . . . |
35 |
Service and Adjustments . . . . . . . . . . |
20 |
|
|
|
|
||
INTRODUCTION |
|
||
NON-ENGLISH MANUALS |
|
THE MANUAL |
|
Manuals in languages other than English may be obtained from your Dealer. Visit your dealer or www.gravely.com for a list of languages available for your equipment.
Manuals printed in languages other than English are also available as a free download on our website:
Before operation of unit, carefully and completely read your manuals. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance.
All reference to left, right, front, or rear are given from operator sitting in the operation position and facing the direction of forward travel.
http://www.gravely.com
MANUALES EN IDIOMAS
DIFERENTES DEL INGLES
Puede obtener manuales en idiomas diferentes del inglés en su distribuidor. Visite a su distribuidor o vaya a www.gravely.com para obtener una lista de idiomas
disponibles para su equipo.
También puede imprimir manuales en idiomas diferentes del inglés descargándolos gratuitamente de nuestra página Web:
http://www.gravely.com
MANUELS NON ANGLAIS
Des manuels dans différentes langues sont disponibles chez votre revendeur. Rendez-vous chez votre revendeur ou allez sur le site www.gravely.com pour
consulter la liste des langues disponibles pour votre équipement.
Les manuels imprimés dans des langues différentes de l’anglais sont également disponibles en téléchargement gratuit sur notre site Web :
http://www.gravely.com
ENGINE MANUAL
The engine on this unit is covered by a separate manual specific to the engine. This manual is included in the literature package that shipped with the unit. Refer to this manual for engine service recommendations. If the engine manual is not available, contact the engine manufacturer for a replacement manual.
SERVICE AND REPLACEMENT PARTS
When ordering publications, replacement parts, or making service inquiries, know the Model and Serial numbers of your unit and engine.
Numbers are located on the product registration form in the literature package. They are printed on a serial number label, located on the frame of your unit (Figure 1).
GB - 2
Serial Number Label
Figure 1
•Record Unit Model and Serial numbers here.
•Record Engine Model and Serial numbers here.
PRODUCT REGISTRATION
The Gravely dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting requirements during the limited warranty period will be honored, whether or not the product registration card is returned. Keep a proof of purchase if you do not register your unit.
Customer Note: If the Dealer does not register your product, please fill out, sign and return the product registration card to Gravely or go to www.gravely.com on the Internet.
UNAUTHORIZED REPLACEMENT PARTS
Use only Gravely replacement parts. The replacement of any part on this equipment with anything other than a Gravely authorized replacement part may adversely affect the performance, durability, and safety of this unit and may void the warranty. Gravely disclaims liability for any claims or damages, whether regarding warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts.
NOTE: To locate your nearest Gravely Dealer, go to www.gravely.com.
DISCLAIMER
Gravely reserves the right to discontinue, change, and improve its products at any time without public notice or obligation to the purchaser. The descriptions and specifications contained in this manual were in effect at printing. Equipment described within this manual may be optional. Some illustrations may not be applicable to your unit.
DEALER DELIVERY
Dealer should:
1.Test brakes after unit is assembled to be sure adjustment has not been disturbed in shipment (See Parking Brake Interlock System on page 14). Wheel brakes are properly adjusted at factory.
2.Check the safety interlock system to make sure that it is functioning properly. With operator on seat, unit must not start unless steering levers are in neutral (N) and Power Takeoff (PTO) is disengaged (Off). Engine must stop if operator leaves seat when steering levers are in any drive position or PTO is engaged (On). See Safety Interlock System on page 14.
3.Fill out Original Purchaser Registration Card and return the card to Gravely.
4.Explain Limited Warranty Policy.
5.Explain recommended lubrication and maintenance. Advise customer on adjustments. Instruct customer on controls and operation of unit. Discuss and emphasize the Safety Precautions. Give customer Owner/Operator, Parts, and Engine Manuals. Advise customer to thoroughly read and understand them.
Customer Note: Your Dealer has been provided complete set-up and preparation instructions which must be completed prior to you taking delivery of this unit. The dealer is required to review important information in this manual with you before or upon delivery of the unit or attachment.
GB - 3
SAFETY
WARNING: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the safety instructions in the manuals and on decals could result in serious injury or death.
Slopes are a major factor related to loss-of-control and tip-over accidents. Operation on all slopes requires extra caution.
Tragic accidents can occur if the operator is not alert to the presence of children. Never assume that children will remain where you last saw them.
Gasoline is extremely flammable and the vapors are explosive, handle with care.
Disengage attachment, stop unit and engine, remove key, engage parking brake, and allow moving parts to stop before leaving operator’s position.
OL1253 |
OL3900 |
SAFETY ALERT SYMBOL
These are safety alert symbols. They mean:
•ATTENTION!
•YOUR SAFETY IS
INVOLVED!
When you see this symbol:
•BECOME ALERT!
•OBEY THE MESSAGE!
SIGNAL WORDS
The safety alert symbols above and signal words below are used on decals and in this manual.
Read and understand all safety messages.
DANGER: IMMINENTLY HAZARDOUS SITUATION! If not avoided, WILL RESULT in death or serious injury.
WARNING: POTENTIALLY HAZARDOUS SITUATION! If not avoided, COULD RESULT in death or serious injury.
CAUTION: POTENTIALLY HAZARDOUS SITUATION! If not avoided, MAY RESULT in minor or moderate injury. It may also be used to alert against unsafe practices.
NOTATIONS
NOTE: General reference information for proper operation and maintenance practices.
IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment.
PRACTICES AND LAWS
Practice usual and customary safe working precautions, for the benefit of yourself and others. Understand and follow all safety messages. Be alert to unsafe conditions and the possibility of minor, moderate, or serious injury or death. Learn applicable rules and laws in your area, including those that may restrict the age of the operator.
REQUIRED OPERATOR TRAINING
Original purchaser of this unit was instructed by the seller on safe and proper operation. If unit is to be used by someone other than original purchaser (loaned, rented or sold), ALWAYS provide this manual and any needed safety training before operation.
SAFETY DECALS AND LOCATIONS
ALWAYS replace missing or damaged Safety Decals. Refer to Figure 2 for Safety Decal locations.
GB - 4
NOTE: This unit may contain any of the following safety decals.
11 |
1 |
|
2 |
||
|
10 
|
Never fill tank when |
|
engine is running, |
|
hot or unit is indoors. |
|
Never overfill fuel |
9 |
tank. |
Replace fuel cap |
|
|
securely and clean |
|
up spilled fuel. |
P
07800403
8
3 7 
07800401
6
4 
5 
Figure 2
1. 1. Danger! TO AVOID SERIOUS INJURY OR DEATH
Read Owner/Operator Manual. Allow operation only by properly trained adult, never children.
Keep children and others away from unit while operating.
Never direct discharge toward other people. Thrown objects can cause injury.
Look down and behind before and while backing.
Keep children out of work area and under watchful care of a responsible adult.
NEVER CARRY
CHILDREN.
Go up and down slopes, not across.
DO NOT operate on slopes over 17°.
•If machine stops going uphill, stop blade and back down slowly.
•Avoid sudden turns.
•Keep safety devices (guards, shields, switches, etc.) in place and working.
•Check interlock system per manual before use.
•Understand location and function of all controls.
•Never allow operation by untrained persons.
GB - 5
2. DANGER
DANGER!
Read and understand the operator’s manual before operating unit.
2.1 Dismemberment Hazard
To avoid dismemberment hazard do not put hands near rotating blades.
To avoid dismemberment hazard do not put hands near moving belts.
Keep hands away from all rotating or moving parts.
Keep all guards and shields in place.
2.2 Discharge Hazard
Discharge Hazard – NEVER direct discharge toward people, pets or property. Thrown objects can cause injury or damage.
Keep children and others away from unit while unit is in operation.
Do not operate mower unless all guards are in operating position or bagger is attached.
2.3 Tipping Hazard
Avoid tipping hazard.
DO NOT operate on slopes over 15°.
DO NOT operate on slopes over 15°.
2.4 Service Hazard
Before servicing unit do the following:
Read owners manual before servicing or making adjustments to unit.
P
Set parking brake.
Remove key and disconnect spark plug before servicing or making adjustments to unit.
GB - 6
2.5 Bystander Hazard
DO NOT operate the unit in the presence of bystanders.
Do not carry passengers.
Look behind when operating the unit in reverse.
2.6 Loss of Traction Hazard
If loss of traction is experienced do the following:
Disengage PTO.
Look before backing.
Proceed off slope slowly.
Do not try to turn or speed up.
3. DANGER!
Discharge Hazard – NEVER operate unit without discharge chute in operating position. Thrown objects can cause injury or damage.
Do not operate mower unless all guards are in operating position or bagger is attached.
4. DANGER!
AVOID INJURY. Stay clear of rotating parts.
GB - 7
5. DANGER!
Discharge Hazard - NEVER direct discharge toward people, pets or property. Thrown objects can cause injury or damage.
Dismemberment Hazard – NEVER stick hands or feet under deck or shielded areas.
Shut off engine, remove key, and read manual before servicing or making adjustments to unit.
Keep children and others away from unit while unit is in operation.
Keep feet and hands away from all rotating or moving parts.
DO NOT step or stand in this area.
6. WARNING!
Discharge Hazard - NEVER operate unit without discharge chute in operating position. Thrown objects can cause injury or damage.
Do not operate mower unless all guards are in operating position or bagger is attached.
7. DANGER!
Discharge Hazard – NEVER operate unit without discharge chute in operating position. Thrown objects can cause injury or damage.
Do not operate mower unless all guards are in operating position or bagger is attached.
8. DANGER!
Always keep feet and hands away from rotating parts.
Always stand clear of discharge area. Do not direct discharge toward other people
Keep people away from unit while operating.
Shut off engine, remove key, read manual before you adjust or repair unit.
NO STEP! Always keep feet away from rotating parts.
9. HOT SURFACES!
DO NOT touch parts which are hot from operation. ALWAYS allow parts to cool.
GB - 8
10. CAUTION!
No smoking.
MAX. FILL
Fill fuel tank to bottom of neck – MAXIMUM.
WARNING: Over Filling may cause severe damage to evaporative system!
•Never fill fuel tank when engine is running, hot or unit is indoors. Never overfill fuel tank.
•Replace fuel cap securely and clean up spilled fuel.
11. ROTATING PARTS!
AVOID INJURY. Stay clear of rotating parts.
EMISSION CONTROL SYSTEM
This equipment and/or its engine may include exhaust and evaporative emissions control system components required to meet U.S. Environmental Protection Agency (EPA) and/or California Air Resources Board (CARB) regulations. Tampering with emission controls and components by unauthorized personnel may result in severe fines or penalties. Emission controls and components can only be adjusted by an Ariens Company dealer or an authorized engine manufacturer's service center. Contact your Ariens Company Equipment Retailer concerning emission controls and component questions.
SAFETY RULES
Read, understand, and follow all safety practices in Owner/Operator Manual before beginning assembly. Failure to follow instructions could result in personal injury and/or damage to unit.
ALWAYS remove key and/or wire from spark plug before assembly. Unintentional engine start up can cause death or serious injury.
Complete a walk around inspection of unit and work area to understand:
• Work area • Your unit • All safety decals
Determine which attachments are needed and can be used safely.
Inspect unit before each use for: missing or damaged decals and shields, correctly operating safety interlock system, and deterioration of grass catchers. Replace or repair as needed.
ALWAYS check overhead and side clearances carefully before operation. ALWAYS be aware of traffic when operating along streets or curbs.
Keep children and people away.
Keep children out of work area and under watchful care of a responsible adult.
Keep area of operation clear of all toys, pets, and debris. Thrown objects can cause injury.
Check for weak spots on docks, ramps or floors. Avoid uneven work areas and rough terrain. Stay alert for hidden hazards or traffic.
DO NOT operate near drop-offs, ditches, or embankments. Unit can suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.
Data indicates that operators, age 60 and above, are involved in a larger percentage of riding mower related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.
Read the entire Owner/Operator manual and other training material. If the operator or the mechanic cannot read the manual, it is the owner’s responsibility to explain it to them. Only the user can prevent and is responsible for accidents or injuries occurring to themselves, other people or property.
Only trained adults may operate or service unit. Training includes actual operation.
Local regulations may restrict the age of the operator.
NEVER allow children to operate or play on or near unit. Be alert and shut off unit if children enter area.
NEVER operate unit after or during the use of medication, drugs or alcohol. Safe operation requires your complete and unimpaired attention at all times.
DO NOT wear loose clothing or jewelry and tie back hair that may get caught in rotating parts.
Wear adequate outer garments.
NEVER wear open sandals or canvas shoes during operation. Wear adequate safety gear, protective gloves and footwear.
Wear proper footwear to improve footing on slippery surfaces.
Always wear safety goggles or safety glasses with side shields when operating mower.
GB - 9
Moving parts can cut or amputate fingers or a hand. Wrap blade(s) or wear gloves to service. On multiblade mowers, rotation of one blade will cause all blades to rotate.
NEVER place your hands or any part of your body or clothing inside or near any moving part while unit is running.
ALWAYS keep hands and feet away from all rotating parts during operation. Rotating parts can cut off body parts.
ALWAYS keep body and hands away from pin holes or nozzles which eject hydraulic fluid under pressure.
DO NOT touch parts which are hot. Allow parts to cool.
ALWAYS keep hands and feet away from all pinch points.
Fumes from the engine exhaust can cause death or serious injury. DO NOT run engine in an enclosed area. Always provide good ventilation.
Read, understand, and follow all instructions in the manual and on the machine before starting. Understand:
•How to operate all controls
•The functions of all controls
•How to STOP in an Emergency
•Braking and steering characteristics
•Turning radius and clearances
Keep safety devices or guards in place and functioning properly. NEVER modify or remove safety devices.
Do not operate without either entire grass catcher or the discharge guard in place.
Stop engine before removing grass catcher or unclogging chute.
Ensure Safety Interlock System is functioning properly. DO NOT operate unit if safety interlock is damaged or disabled.
Start and operate unit only when seated in operator’s position. Steering control levers must be in neutral, PTO disengaged and parking brake set when starting engine.
Use care when approaching blind corners, shrubs, trees or other objects that may obscure vision.
Dust, smoke, fog, etc. can reduce vision and cause an accident. Mow only in daylight or good artificial light.
Avoid slippery surfaces. Always be sure of your footing.
DO NOT mow on wet grass. Reduced traction could cause sliding and effect the machine’s stability.
Watch for traffic when operating near or crossing roadways.
Never carry passengers.
DO NOT try to stabilize the machine by putting your foot on the ground.
Never direct discharge towards persons or property that may be injured or damaged by thrown objects. Use extreme caution on gravel surfaces.
Always stand clear of the discharge area.
ALWAYS disengage PTO, stop unit and engine, remove key, engage parking brake and allow moving parts to stop before leaving operator’s position.
Never engage PTO while raising attachment or when attachment is in raised position.
DO NOT operate at too fast a rate. DO NOT change engine governor settings or overspeed engine. Slow down before turning.
DO NOT operate in reverse unless absolutely necessary. ALWAYS look down and behind before and while backing.
Stop and inspect equipment if you strike an object or if there is an unusual vibration. Repair, if necessary, before restarting. Never make adjustments or repairs with the engine running.
Mower blades are sharp and can cut you. Wrap the blade(s) or wear gloves, and use extra caution when servicing them. NEVER weld or straighten mower blades.
Rotation of one blade may cause rotation of the other blades.
Take all possible precautions when leaving unit unattended. Shut off engine. Remove wire from spark plug and secure it away from spark plug.
ALWAYS remove key to prevent unauthorized use.
Know the weight of loads. Limit loads to those you can safely control and the unit can safely handle.
Disengage PTO when attachment is not in use. ALWAYS turn off power to attachment when travelling, crossing driveways, etc.
Mow up and down slopes, not across them. DO NOT operate on slopes of more than 15 degrees.
Operation on slopes may lead to loss of steering control. When operating on slopes be prepared to react to an emergency situation:
•Return steering levers to neutral position.
•Immediately set parking brake.
•Turn off PTO and engine.
Keep all movements on the slope slow and gradual. Do not make sudden changes in speed or direction.
Avoid starting or stopping on the slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.
If you cannot back up a slope or you feel uneasy on it, do not mow it.
DO NOT park on slopes unless necessary. When parking on slope always chock or block wheels. Always set parking brake.
Use a slow speed. Tires may lose traction on slopes even though the brakes are functioning properly.
Do not bypass transmission when on a slope.
Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.
GB - 10
Follow the manufacturer’s recommendations for weight limits for towed equipment and towing on slopes.
NEVER allow children or others in or on towed equipment.
On slopes, the weight of the towed equipment may cause loss of control.
Travel slowly and allow extra distance to stop. Use extra care when loading or unloading unit onto trailer or truck.
Secure unit chassis to transport vehicle. NEVER secure from rods or linkages that could be damaged.
DO NOT transport machine while engine is running.
ALWAYS turn off power to attachment and shut off fuel when transporting unit.
Keep unit free of debris. Clean up oil or fuel spills.
This product is equipped with an internal combustion type engine. DO NOT use unit on or near any unimproved, forest-covered or brush covered land unless exhaust system is equipped with a spark arrester meeting applicable local, state or federal laws. A spark arrester, if it is used, must be maintained in effective working order by operator.
Fuel is highly flammable and its vapors are explosive. Handle with care. Use only an approved gasoline container with an appropriately sized dispensing spout.
NO smoking, NO sparks, NO flames. ALWAYS allow engine to cool before servicing.
NEVER fill fuel tank when engine is running or hot from operation.
NEVER fill or drain fuel tank indoors. Replace fuel cap securely and clean up spilled fuel.
Properly remove fuel before tipping unit.
Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.
When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.
Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lockopen device.
If fuel is spilled on clothing, change clothing immediately.
Avoid Electric Shock. Objects contacting both battery terminals at the same time may result in injury and unit damage. DO NOT reverse battery connections.
Reverse connections may result in sparks which can cause serious injury. Always connect positive (+) lead of charger to positive (+) terminal, and negative (-) lead to negative (-) terminal.
ALWAYS disconnect negative (-) cable FIRST and positive (+) cable SECOND. ALWAYS connect positive (+) cable FIRST, and negative (-) cable SECOND.
Explosive Gases from battery can cause death or serious injury. Poisonous battery fluid contains sulfuric acid and its contact with skin, eyes or clothing can cause severe chemical burns.
No flames, No sparks, No smoking near battery.
ALWAYS wear safety glasses and protective gear near battery. Use insulated tools.
DO NOT TIP battery beyond a 45° angle in any direction.
ALWAYS keep batteries out of reach of children.
Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.
ALWAYS block wheels and know all jack stands are strong and secure and will hold weight of unit during maintenance. Release pressure slowly from components with stored energy.
NEVER attempt to make any adjustments to unit while engine is running (except where specifically recommended). Stop engine, remove key or spark plug wire and wait for all moving parts to stop before servicing or cleaning.
Check parking brake operation frequently. Adjust and service as required.
ALWAYS maintain unit in safe operating condition. Damaged or worn out muffler can cause fire or explosion.
Maintain or replace safety and instruction labels, as necessary.
NEVER store unit with fuel in fuel tank, inside a building where any ignition sources are present.
Shut off fuel and allow engine to cool completely before storing in closed area or covering unit.
Clean grass and debris from unit, especially from around muffler and engine, to help prevent fires.
For extended storage, shut off fuel and clean unit thoroughly. See engine manual for proper storage.
Lower cutting deck unless a positive mechanical lock is used.
Use only attachments or accessories designed for your unit.
Check all hardware at regular intervals, especially blade attachment bolts. Keep all hardware properly tightened.
Check attachment components frequently. If worn or damaged, replace with manufacturer’s recommended parts.
GB - 11
ASSEMBLY
WARNING: AVOID INJURY.
Read and understand entire
Safety section before proceeding.
UNIT ASSEMBLY
Package Contents:
Unit, Mower Deck and Literature Pack
Preparation Checklist
Refer to the Owner/Operator manual as required.
1.Unpack Unit – Remove shrink wrap and packaging materials.
2.Remove Unit From Container – Open Bypass Valves (dump valves) (See
Moving the Unit with the Engine Off on page 18).
Push unit from container onto a level surface. Close the bypass valves.
3.Tires – See Specifications on page 33.
CAUTION: Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly:
•Do not attempt to mount a tire without the proper equipment and experience to perform the job.
•Do not inflate the tires above the recommended pressure.
•Do not weld or heat a wheel and tire assembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or deform the wheel.
•Do not stand in front or over the tire assembly when inflating. Use a clip-on chuck and extension hose long enough to allow you to stand to one side.
4.Seat – See Seat Adjustments on page 15 and Service Position on page 20.
5.Position Steering Levers – Remove eccentric spacers and rotate steering levers to the operating position. Reinstall spacers. Tighten hardware securely. See Aligning the Steering Levers (Figure 14) on page 25.
1 |
3 |
2 |
1 |
|
|
1. |
Steering |
3. Mounting |
|
Levers |
Hardware |
2. |
Seat |
OF4110 |
|
|
Figure 3 |
6.Battery – Remove battery from unit and charge (See Battery on page 23).
7.Check Engine Crankcase – Check and add oil if needed. See Engine Manual for specifications.
8.Fill Engine Fuel Tank – Fill fuel tank. DO NOT OVERFILL! See Filling Fuel Tank on page 16.
NOTE: See engine manual for fuel type.
9.Hardware – Check for loose hardware.
10.Check Safety Interlock System – Check to see that the interlock system operates correctly (See Safety Interlock System on page 14).
WARNING: FAILURE OF INTERLOCK together with improper operation can result in severe personal injury.
11.Lubrication – Lubricate all fittings per maintenance label under seat and check hydrostat oil level (See Lubricate Unit on page 24).
12.On 60-inch Decks: Remove the discharge chute from the transport position and place the discharge chute in the operating position.
13.Level Deck – Check unit to ensure deck level set at factory has been maintained (See Leveling the Mower Deck on page 30).
14.Check Function of all Controls – Ensure unit runs and performs properly.
WARNING: FAILURE OF CONTROLS could result in death or serious injury.
GB - 12
Loading...