Ariens 65 User Manual

Size:
872.44 Kb
Download

TABLE OF CONTENTS

Section 1 - Introduction . . . . . . . . . . . . . . . . . 1-3

1.1 The Manual . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.2 Service and Replacement Parts . . . . . . . 1-3

1.3 Product Registration . . . . . . . . . . . . . . . . 1-3

1.4 Unauthorized Replacement Parts . . . . . . 1-3

1.5 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.6 Technical Service Communications . . . . . 1-3

Section 2 - Safety

2.1 Safety Alerts . . . . . . . . . . . . . . . . . . . . . . 2-4

2.2 Signal Words . . . . . . . . . . . . . . . . . . . . . . 2-4

2.3 Notations . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.4 Practices and Laws . . . . . . . . . . . . . . . . . 2-4

2.5 Required Operator Training . . . . . . . . . . . 2-4

2.6 Preparation . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.7 Cleaning and Storage . . . . . . . . . . . . . . . 2-4

2.8 Safety Rules . . . . . . . . . . . . . . . . . . . . . . 2-5

Section 3 - Specifications . . . . . . . . . . . . . . . 3-8

Section 4 - General Maintenance &

Adjustments. . . . . . . . . . . . . . . . . . . . . . . .4-21

4.1 Controls and Features . . . . . . . . . . . . . . .4-21

4.2 Service Positions . . . . . . . . . . . . . . . . . . .4-22

4.3 Filling The Fuel Tank . . . . . . . . . . . . . . . .4-22

4.4 General Lubrication . . . . . . . . . . . . . . . . .4-22

4.5 Check Mower Blade. . . . . . . . . . . . . . . . .4-23

4.6 Check Drive Belt . . . . . . . . . . . . . . . . . . .4-23

4.7 Check Engine/Blade Control . . . . . . . . . .4-23

4.8 Check Grass Bag. . . . . . . . . . . . . . . . . . .4-24

4.9 Check Drive Control. . . . . . . . . . . . . . . . .4-24

4.10 Handlebar Adjustment . . . . . . . . . . . . . .4-25

4.11 Speed Control Bell Crank. . . . . . . . . . . .4-25

4.12 Friction Wheel Adjustment. . . . . . . . . . .4-26

Section 5 - Engine . . . . . . . . . . . . . . . . . . . . . .5-27

5.1 Engine Troubleshooting . . . . . . . . . . . . . .5-27

5.2 Engine Service Locations . . . . . . . . . . . .5-28

5.3 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . .5-29

5.4 Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . .5-29

5.5 Engine Cooling. . . . . . . . . . . . . . . . . . . . .5-31

5.6 Spark Plug . . . . . . . . . . . . . . . . . . . . . . . .5-31

5.7 Battery (Electric Start Model) . . . . . . . . . .5-31

Section 6 - Mower Deck . . . . . . . . . . . . . . . . .6-32

6.1 Blade Brake/clutch Removal . . . . . . . . . .6-32

6.2 Drive Belt Replacement . . . . . . . . . . . . . .6-33

6.3 Idler Removal. . . . . . . . . . . . . . . . . . . . . .6-33

6.4 Wheels And Adjusters . . . . . . . . . . . . . . .6-33

Section 7 - Handlebars & Controls . . . . . . . .7-37

7.1 Handlebars And Bails . . . . . . . . . . . . . . .7-377.2 Speed Control BellCrank . . . . . . . . . . . .7-37

Section 8 - Electrical . . . . . . . . . . . . . . . . . . . .8-39

8.1 Battery (Electric Start Models) . . . . . . . . .8-39

8.2 Wiring Diagram . . . . . . . . . . . . . . . . . . . .8-39

8.3 Continuity Diagram . . . . . . . . . . . . . . . . .8-39

Section 9 - Friction Drive System & Axle. . .9-40

9.1 Introduction . . . . . . . . . . . . . . . . . . . . . . .9-40

9.2 Gear Removal . . . . . . . . . . . . . . . . . . . . .9-40

9.3 Axle Removal. . . . . . . . . . . . . . . . . . . . . .9-40

9.4 Drive Mount Removal . . . . . . . . . . . . . . .9-40

9.5 Drive Mount Disassembly . . . . . . . . . . . .9-40

9.6 Friction Wheel Replacement . . . . . . . . . .9-40

9.7 Drive Disk Removal . . . . . . . . . . . . . . . . .9-41

Section 10 - Gear Drive System & Axle. . . . 10-43

10.1 Introduction . . . . . . . . . . . . . . . . . . . . . 10-43

10.2 Transmission Replacement . . . . . . . . . 10-43

2

SECTION 1 - INTRODUCTION

1.1 THE MANUAL

Before operation of unit, carefully and completely read your manuals. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance.

All reference to left, right, front, or rear are given from the operation position, facing the direction of forward travel.

1.2 SERVICE AND REPLACEMENT PARTS

When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine.

Numbers are located on the product registration form in the unit literature package. They are also printed on a serial number label, located on the frame of your unit (Figure 1).

Serial Number

Figure 1

1.3 PRODUCT REGISTRATION

A warranty registration card must be filled out by the Ariens dealer, signed, and returned at time of sale. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored.

1.4 UNAUTHORIZED REPLACEMENT PARTS

Use only Ariens replacement parts. The replacement of any part on this unit with anything other than Ariens authorized replacement parts may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury, or death arising out of the use of unauthorized replacement parts.

1.5 DISCLAIMER

Ariens reserves the right to discontinue, make changes to, and add improvements upon its products at any time without public notice or obligation. The descriptions and specifications contained in this manual were in effect at printing. Equipment described within this manual may be optional. Some illustrations may not be applicable to your unit.

1.6 TECHNICAL SERVICE COMMUNICATIONS

Ariens Technical Service communicates information to the field using Service Letters, Service Bulletins, Product Notices, and Campaigns. Each communication signifies a type of information and priority. The dealer is responsible to carry out the directive provided in the communication. The types of communication are:

Service Letter - General technical information for the dealer. Technical information on how to service the product and product improvements.

Service Bulletin - Notification to update products to resolve certain issues or a notification of a policy change.

Product Notices - Notification of limited product located in a certain region. This is a limited distribution to only those who received the product involved.

Campaigns - Notification of a safety related issue. All product must be updated and are tracked by the factory until all units are corrected.

1 - 3

SECTION 2 - SAFETY

2.1 SAFETY ALERTS

Look for these symbols to point out important safety precautions. They mean:

Attention!

Personal Safety Is Involved!

Become Alert!

Obey The Message!

2.2 SIGNAL WORDS

The safety alert symbol is used in decals on the unit and with proper operation procedures in this manual. They alert you to the existence and relative degree of hazards.

Understand the safety message. It contains important information about personal safety on or near the unit.

DANGER: IMMINENTLY HAZARDOUS SITUATION! If not avoided, WILL RESULT in death or serious injury.

WARNING: POTENTIALLY HAZARDOUS SITUATION! If not avoided, COULD RESULT in death or serious injury.

CAUTION: POTENTIALLY HAZARDOUS SITUATION! If not avoided, MAY RESULT in minor or moderate injury. It may also be used to alert against unsafe practices.

2.3 NOTATIONS

NOTE: General reference information for proper operation and maintenance practices.

IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment.

2.4 PRACTICES AND LAWS

Practice usual and customary safe working precautions, for the benefit of yourself and others. Understand and follow all safety messages. Be alert to unsafe conditions and the possibility of minor, moderate, or serious injury or death. Learn applicable rules and laws in your area.

2.5 REQUIRED OPERATOR TRAINING

Original purchaser of this unit was instructed by the seller on safe and proper operation. If unit is to be used by someone other than original purchaser; loaned, rented or sold, ALWAYS provide this manual and any needed safety training before operation.

2.6 PREPARATION

Before starting any removal of parts, proper preparation is very important for efficient work. A clean work area at the start of each job will allow you to perform service repairs easily and quickly.

To reduce the incidence of misplaced tools or parts, place removed components with all attaching hardware in the disassembly order on a clean work surface. Organization is a key part of proper reassembly.

Tools, instruments, and parts needed for the job should be gathered before work is started. Interrupting a job to locate tools or parts is a needless delay.

CAUTION: Remove enough fuel so that no spillage will occur. Remove battery to prevent spillage of electrolyte.

2.7 CLEANING AND STORAGE

WARNING: AVOID SHARP EDGES which can cut. Movement of parts can cut off fingers or a hand. Wear gloves, and use extreme caution when servicing.

IMPORTANT: Never spray unit with water or store unit outdoors to help prevent sealed bearing rust or corrosion. Water can seep into sealed bearings and reduce component life. Bearings are sealed against dirt and debris only.

A unit that is excessively dirty should be cleaned before work starts. Cleaning will occasionally uncover trouble sources. Dirt and abrasive dust reduce the efficient work life of parts and can lead to costly replacement.

2 - 4

When taking unit out of extended storage:

1.Check for any damage or loose parts. Repair, replace, or tighten hardware before operation.

2.If a preservative fluid was used in fuel tank, drain and discard. Fill fuel tank with fresh new fuel.

2.8 SAFETY RULES

Walk Around Inspection

Complete a walk around inspection of unit and work area to understand:

Work area.

Your unit.

All safety decals.

Work Area

ALWAYS check overhead and side clearances carefully before operation. ALWAYS be aware of traffic when operating along streets or curbs.

ALWAYS keep hands and feet within the limits of the unit.

Keep children, people, and animals away. Keep children out of work area and under watchful care of a responsible adult.

Keep area of operation clear of all toys, pets, and debris. Stay alert for hidden hazards.

Clear work area of objects which might be picked up and thrown. Remove all stones, sticks, wires, and other foreign objects. Tall grass can hide obstacles.

DO NOT run engine in an enclosed area. Always provide good ventilation.

Unit

ALWAYS keep protective structures, guards, and panels in good repair, in place and securely fastened. NEVER modify or remove safety devices.

Check Safety Interlock System for proper operation daily (see Operation section). Do not operate unless system operates properly.

Keep equipment in good condition.

ALWAYS keep discharge cover in place.

NEVER operate the engine with the Rear Door open unless the Grass Bag is in place.

When mulching, the Side Discharge Opening Cover must be installed and the Rear Door fully closed whenever the engine is operating.

Operation

Understand:

How to operate all controls

The functions of all controls

How to STOP in an Emergency

Speed ranges

ALWAYS operate unit in good visibility and light.

DO NOT pull mower backwards unless absolutely necessary. Look down and back before and while moving backwards.

DO NOT start the engine or operate mower unless either the Side Discharge Opening Cover or the Side Discharge Deflector is installed.

Keep the area of operation clear of all persons, children and pets.

ALWAYS clear area before operation to avoid thrown objects.

Stop mower if anyone enters the area.

Keep safety devices or guards in place and functioning properly. NEVER modify or remove safety devices.

ALWAYS keep hands away from all rotating parts during operation.

Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening and mower pan at all times. NEVER open the Rear Door without the Grass Bag in place when the engine is operating.

ALWAYS keep feet and hands away from all rotating parts during operation. Rotating parts can cut off body parts.

DO NOT mow at too fast a rate. DO NOT change engine governor setting or over-speedthe engine.

ALWAYS operate unit when there is good visibility and light.

Use extra care when approaching blind corners, shrubs, trees, or other objects which may obscure vision.

ALWAYS be sure of your footing.

Do not operate mower in wet grass. Always be sure of your footing. Keep a firm hold on handlebar. Walk, never run.

If equipment vibrates abnormally, stop engine at once, wait for moving parts to stop and remove wire from spark plug. Repair any damage before restarting unit.

Avoid uneven work areas and any rough terrain.

Be familiar with area of operation. Stay alert for holes, rocks, roots, and hidden hazards in area of operation. Operator could lose footing or balance.

DO NOT operate on steep slopes.

NEVER leave unit unattended on a slope. Chock wheels if parking on a slope.

Mow across the face of slopes, never up and down. Be especially cautious when changing direction on slopes.

Remove the key when parking.

Take all possible precautions when leaving unit unattended.

ALWAYS shut off engine, remove key and remove spark plug wire to prevent accidental starting or unauthorized use.

2 - 5

Fuel is highly flammable and its vapors can explode. Use ONLY approved fuel containers.

NO Smoking!

NO Sparks!

NO Flames!

Allow engine to cool before servicing.

NEVER fill fuel tank when engine is running, hot, or unit is indoors.

Abnormal Vibrations are a warning of trouble. Striking a foreign object can damage unit. Stop unit and engine. Wait for all moving parts to stop. Remove wire from spark plug. Inspect unit and make any necessary repairs before restart.

Hazardous Slopes

DO NOT operate on steep slopes. Avoid operating on slopes. When you must operate on a slope, travel up and down the slope. Never operate cross a slope.

Never operate on a slope greater than 10 degrees.

Child Safety

NEVER allow children to operate or play on or near unit. Be alert and shut off unit if children enter area.

Personal Safety

Read and obey all warning, caution, and instructions on the unit and in provided manuals.

Only trained adults may operate unit.

Training includes actual operation.

Clearly understand instructions.

Be alert! Conditions can change.

NEVER operate unit after or during the use of medication, drugs or alcohol. Safe operation requires your complete and unimpaired attention at all times.

NEVER allow anyone to operate the unit when their alertness or coordination is impaired.

Avoid Sharp Edges. Sharp edges can cut. Moving parts can cut or amputate fingers or a hand. Wear gloves to service unit when handling sharp edges.

ALWAYS keep hands away from any pinch points.

ALWAYS keep hands and feet away from all moving parts during operation. Moving parts can cut off body parts.

DO NOT touch unit parts which might be hot from operation. Allow parts to cool before attempting to maintain, adjust, or service.

Keep children out of work area and under the watchful care of an adult.

NEVER allow children to operate mower.

Turn the mower off if children enter the area.

NEVER direct discharge toward bystanders. The operator is responsible for the safety of bystanders.

Wear adequate safety gear, protective gloves and footwear.

Wear sturdy footwear. DO NOT operate mower barefoot or when wearing open sandals or canvas shoes.

Always wear safety goggles or safety glasses with side shields when operating mower.

NEVER wear loose clothing, jewelry or long hair that may get caught in rotating parts. Protect eyes, face and head from objects that may be thrown from unit.

ALWAYS stand clear of discharge when operating unit.

Do not operate mower on gravel or on loose material such as sand. Stop mower when crossing gravel drives, walks, or roads, Objects may be picked up and thrown, causing damage or injury.

Fumes from the engine exhaust can cause death or serious injury. DO NOT run engine in an enclosed area.

Service and Adjustments

NEVER attempt to make any adjustments to unit while engine is running. Stop engine, remove key, disconnect spark plug wire and wait for all moving parts to stop before servicing (except where specifically recommended).

DO NOT make cutting height wheel adjustments while the engine is running.

On self-propelledmodels, the wheel drive control will cause the forward movement of the mower to stop. If this feature fails to operate, disconnect ignition wire and repair before using. Wheel drive must be disengaged when starting engine.

Fuel is highly flammable and its vapors can explode. ONLY use approved fuel containers.

NO Smoking!

NO Sparks!

NO Flames!

Allow engine to cool before filling fuel tank. Check fuel supply before starting engine.

DO NOT fill gasoline tank indoors, when engine is running, or while engine is still hot.

Allow engine to cool several minutes before removing fuel cap.

Replace gasoline tank cap securely and clean up any spilled fuel before starting engine.

Stop engine, wait for moving parts to stop, remove ignition wire and secure away from spark plug before attempting to: unclog, repair, adjust, inspect or clean unit.

To reduce fire hazard and overheating, keep equipment free of grass, leaves, debris or excessive lubricants.

2 - 6

Battery

Avoid Electric Shock. DO NOT remove wire from spark plug while engine is running. Do not put battery in fire or mutilate.

Explosive Gases! Poisonous battery fluid contains sulfuric acid. Contact with skin, eyes or clothing can cause severe chemical burns.

No flames, No Sparks, No smoking, near battery.

ALWAYS wear safety glasses and protective gear near battery.

ALWAYS KEEP BATTERIES OUT OF REACH of children.

Maintenance

Follow engine manufacturer’s safety instructions when servicing engine.

Keep all nuts, bolts, and screws tight and be sure equipment is in safe working condition. Check all hardware at regular intervals, especially blade attachment bolts.

Use only replacement parts designed for your unit. See your Ariens Dealer.

Worn out mufflers are more than just a noise nuisance and should be replaced immediately. Continued use could result in fire or explosion.

ALWAYS block wheels and know all jack stands are strong and secure and will hold weight of unit during maintenance.

Check grass bag for wear, damage, and/or deterioration. Replace only with Ariens original equipment replacement part for safety.

Storage

Allow engine to cool before storing in any enclosure.

Refer to Storage Section of the Owner’s Manual for important instructions if unit is to be stored for extended periods.

ALWAYS clean unit before extended storage. See engine manual for proper storage.

DO NOT store unit before extended storage. See engine manual for proper storage.

DO NOT store unit inside a building with fuel in the fuel tank where ignition sources are present.

Safety Interlock System

Engine/Blade Control feature on mower will cause engine and blade to stop whenever operator releases control on handlebar. If feature fails to operate, disconnect spark plug wire and adjust or have it repaired before using unit.

Accessories

Use only accessories which have been approved by Ariens and are properly installed.

Spark Arrestor

This product is equipped with an internal combustion engine. DO NOT use on or near any unimproved, forest or brush covered land unless the exhaust system is equipped with a spark arrestor meeting applicable local, state or federal laws. A spark arrestor, if used, must be maintained in effective working order by the operator. See your Ariens Dealer or engine manufacturer’s service center.

2 - 7

SECTION 3 - SPECIFICATIONS

Model Number

911044

911045

911046

911047

Description Name

LM214SP

LM219SP

LM217SP

LM21SB

Engine Manufacture

Tecumseh

Briggs

Tecumseh

Tecumseh

 

 

 

 

 

Cycles

Four

Four

Four

Four

 

 

 

 

 

HP (3600RPM)

5.5

5

5.5

5.5

 

 

 

 

 

Fuel Tank Capacity - qt (L)

1.5 (1.4)

1.6 (1.5)

1.5 (1.4)

1.5 (1.4)

 

 

 

 

 

Fuel

Unleaded

Unleaded

Unleaded

Unleaded

 

 

 

 

 

Primer Bulb

Standard

Standard

Standard

Standard

 

 

 

 

 

Throttle/Choke Control

N/A

N/A

N/A

N/A

 

 

 

 

 

Starting

Recoil

Recoil

Recoil

Recoil

 

 

 

 

 

Cylinder Bore

Aluminum

Aluminum

Aluminum

Aluminum

 

 

 

 

 

Pressurized Oil System

Standard

N/A

Standard

N/A

 

 

 

 

 

Governed RPM

2850+/-150

2900

2850+/-150

2900

 

 

 

 

 

Crank Case Capacity - oz (L)

27 (0.8)

20 (0.6)

27 (0.8)

27 (0.8)

 

 

 

 

 

Air Cleaner

Paper Element

Paper Element

Paper Element

Paper Element

 

 

 

 

 

Engine Oil Type

SAE 30

SAE 30

SAE 30

SAE 30

 

 

 

 

 

Spark Plug Gap

0.03

0.03

0.03

0.03

 

 

 

 

 

Differential

Standard

Standard

Standard

Standard

 

 

 

 

 

Variable Speeds-MPH(KPH)

0-3.5(0-5.6)

0-3.5(0-5.6)

0-3.5(0-5.6)

0-3.5(0-5.6)

 

 

 

 

 

Mower Deck Gauge

14 Gauge Stamped

14 Gauge Stamped

14 Gauge Stamped

14 Gauge Stamped

 

Steel

Steel

Steel

Steel

 

 

 

 

 

Baked Powder Paint

Standard

Standard

Standard

Standard

 

 

 

 

 

Cutting Width - in (cm)

21 (53.3)

21 (53.3)

21 (53.3)

21 (53.3)

 

 

 

 

 

Cutting Height - in (cm)

6 Positions

6 Positions

6 Positions

6 Positions

 

 

 

 

 

 

1.2-3.5(3.2-8.9)

1.2-3.5(3.2-8.9)

1.2-3.5(3.2-8.9)

1.2-3.5(3.2-8.9)

 

 

 

 

 

Folding Handlebar

Standard One Piece

Standard One Piece

Standard One Piece

Standard One Piece

 

 

 

 

 

Adjustable Handlebar

4 Position

4 Position

4 Position

4 Position

 

 

 

 

 

Front Wheel Diameter - in (cm)

7.5 (19.1)

7.5 (19.1)

7.5 (19.1)

7.5 (19.1)

 

 

 

 

 

Rear Wheel Diameter - in (cm)

10.5 (26.7)

10.5 (26.7)

10.5 (26.7)

10.5 (26.7)

 

 

 

 

 

Side Discharge

Standard

Standard

Standard

Standard

 

 

 

 

 

Bagger

Standard

Standard

Standard

Standard

 

 

 

 

 

Mulching Capability

With Kit

With Kit

With Kit

With Kit

 

 

 

 

 

Attachments (* denotes it comes with unit)

 

 

 

 

 

 

 

 

Dethatcher

71102400

71102400

71102400

71102400

 

 

 

 

 

Mulchmaster Package

71102700

71102700

71102700

71102700

 

 

 

 

 

Leaf Shredder

71102800

71102800

71102800

71102800

 

 

 

 

 

Side Discharge Chute

71102900

71102900

71102900

71102900

 

 

 

 

 

Rear Bagger

71103000

71103000

71103000

71103000

 

 

 

 

 

Swivel Wheel Kit

71103300

71103300

71103300

71103300

 

 

 

 

 

Rear Discharge Chute

71103200

71103200

71103200

71103200

 

 

 

 

 

Rear Roller Kit

71103400

71103400

71103400

71103400

 

 

 

 

 

Mulching Kit

71103500

71103500

71103500

71103500

 

 

 

 

 

3 - 8

Model Number

911048

911049

911050

911051

Description Name

LM21SC

LM21

LM21S

LM21

Engine Manufacture

Briggs

Tecumseh

Tecumseh

Tecumseh

 

 

 

 

 

Cycles

Four

Four

Four

Four

 

 

 

 

 

HP (3600RPM)

5

5

5

5.5

 

 

 

 

 

Fuel Tank Capacity - qt (L)

1.6 (1.5)

1 (0.9)

1 (0.9)

1.5 (1.4)

 

 

 

 

 

Fuel

Unleaded

Unleaded

Unleaded

Unleaded

 

 

 

 

 

Primer Bulb

Standard

Standard

Standard

Standard

 

 

 

 

 

Throttle/Choke Control

 

 

 

 

 

 

 

 

 

Starting

Recoil

Recoil

Recoil

Recoil

 

 

 

 

 

Cylinder Bore

Cast Iron Sleeve

Aluminum

Aluminum

Aluminum

 

 

 

 

 

Pressurized Oil System

N/A

N/A

N/A

N/A

 

 

 

 

 

Governed RPM

2850

2850

2850

2850

 

 

 

 

 

Crank Case Capacity - oz (L)

20 (0.6)

21 (0.6)

21 (0.6)

27 (0.8)

 

 

 

 

 

Air Cleaner

Dual Element

Paper Element

Paper Element

Paper Element

 

 

 

 

 

Engine Oil Type

SAE 30

SAE 30

SAE 30

SAE 30

 

 

 

 

 

Spark Plug Gap

0.03

0.03

0.03

0.03

 

 

 

 

 

Differential

Standard

N/A

Standard

N/A

 

 

 

 

 

Variable Speeds-MPH(KPH)

0-3.5(0-5.6)

N/A

0-3.5(0-5.6)

N/A

 

 

 

 

 

Mower Deck Gauge

14 Gauge Stamped

14 Gauge Stamped

14 Gauge Stamped

14 Gauge Stamped

 

Steel

Steel

Steel

Steel

 

 

 

 

 

Baked Powder Paint

Standard

Standard

Standard

Standard

 

 

 

 

 

Cutting Width - in (cm)

21 (53.3)

21 (53.3)

21 (53.3)

21 (53.3)

 

 

 

 

 

Cutting Height - in (cm)

6 Positions

6 Positions

6 Positions

6 Positions

 

 

 

 

 

 

1.2-3.5(3.2-8.9)

1.2-3.5(3.2-8.9)

1.2-3.5(3.2-8.9)

1.2-3.5(3.2-8.9)

 

 

 

 

 

Folding Handlebar

Standard One Piece

Standard One Piece

Standard One Piece

Standard One Piece

 

 

 

 

 

Adjustable Handlebar

4 Position

4 Position

4 Position

4 Position

 

 

 

 

 

Front Wheel Diameter - in (cm)

7.5 (19.1)

7.5 (19.1)

7.5 (19.1)

7.5 (19.1)

 

 

 

 

 

Rear Wheel Diameter - in (cm)

10.5 (26.7)

10.5 (26.7)

10.5 (26.7)

10.5 (26.7)

 

 

 

 

 

Side Discharge

Standard

Standard

Standard

Standard

 

 

 

 

 

Bagger

Standard

Standard

Standard

Standard

 

 

 

 

 

Mulching Capability

With Kit

With Kit

With Kit

With Kit

 

 

 

 

 

Attachments (* denotes it comes with unit)

 

 

 

 

 

 

 

 

Dethatcher

71102400

71102400

71102400

N/A

 

 

 

 

 

Mulchmaster Package

71102700

71102700

71102700

71102700

 

 

 

 

 

Leaf Shredder

71102800

71102800

71102800

71102800

 

 

 

 

 

Side Discharge Chute

71102900

71102900

71102900

71102900

 

 

 

 

 

Rear Bagger

 

71103000

71103000

71103000

 

 

 

 

 

Swivel Wheel Kit

71103300

71103300

71103300

71103300

 

 

 

 

 

Rear Discharge Chute

71103200

71103200

71103200

71103200

 

 

 

 

 

Rear Roller Kit

71103400

71103400

71103400

71103400

 

 

 

 

 

Mulching Kit

71103500

71103500

71103500

71103500

 

 

 

 

 

3 - 9

Model Number

911052

911053

911054

911055

Description Name

LM216S

LM21C

LM21

AP211 SP

Engine Manufacture

Tecumseh

Briggs

Briggs

Tecumseh

 

 

 

 

 

Cycles

Four

Four

Four

Four

 

 

 

 

 

HP (3600RPM)

5.5

5.5

5.5

5.5

 

 

 

 

 

Fuel Tank Capacity - qt (L)

1.5 (1.4)

1.6 (1.5)

1 (0.9)

1.5 (1.4)

 

 

 

 

 

Fuel

Unleaded

Unleaded

Unleaded

Unleaded

 

 

 

 

 

Primer Bulb

Standard

Standard

N/A

Standard

 

 

 

 

 

Throttle/Choke Control

 

 

 

 

 

 

 

 

 

Starting

Recoil

Recoil

Recoil

Recoil

 

 

 

 

 

Cylinder Bore

Aluminum

Cast Iron Sleeve

Aluminum

Aluminum

 

 

 

 

 

Pressurized Oil System

N/A

N/A

N/A

N/A

 

 

 

 

 

Governed RPM

2850

2900

3200

2850

 

 

 

 

 

Crank Case Capacity - oz (L)

27 (0.8)

20 (0.6)

20 (0.6)

21 (0.6)

 

 

 

 

 

Air Cleaner

Paper Element

Dual Element

Paper Element

Paper Element

 

 

 

 

 

Engine Oil Type

SAE 30

SAE 30

SAE 30

SAE 30

 

 

 

 

 

Spark Plug Gap

0.03

0.03

0.03

0.03

 

 

 

 

 

Differential

Standard

N/A

N/A

Standard

 

 

 

 

 

Variable Speeds-MPH(KPH)

0-3.5(0-5.6)

N/A

N/A

0-3.5(0-5.6)

 

 

 

 

 

Mower Deck Gauge

14 Gauge Stamped

14 Gauge Stamped

14 Gauge Stamped

14 Gauge Stamped

 

Steel

Steel

Steel

Steel

 

 

 

 

 

Baked Powder Paint

Standard

Standard

Standard

Standard

 

 

 

 

 

Cutting Width - in (cm)

21 (53.3)

21 (53.3)

21 (53.3)

21 (53.3)

 

 

 

 

 

Cutting Height - in (cm)

6 Positions

6 Positions

6 Positions

6 Positions

 

 

 

 

 

 

1.2-3.5(3.2-8.9)

1.2-3.5(3.2-8.9)

1.2-3.5(3.2-8.9)

1.2-3.5(3.2-8.9)

 

 

 

 

 

Folding Handlebar

Standard One Piece

Standard One Piece

Standard One Piece

Standard One Piece

 

 

 

 

 

Adjustable Handlebar

4 Position

4 Position

4 Position

4 Position

 

 

 

 

 

Front Wheel Diameter - in (cm)

7.5 (19.1)

7.5 (19.1)

7.5 (19.1)

7.5 (19.1)

 

 

 

 

 

Rear Wheel Diameter - in (cm)

10.5 (26.7)

10.5 (26.7)

10.5 (26.7)

10.5 (26.7)

 

 

 

 

 

Side Discharge

Standard

Standard

Standard

Standard

 

 

 

 

 

Bagger

Standard

Standard

Standard

Standard

 

 

 

 

 

Mulching Capability

With Kit

With Kit

With Kit

With Kit

 

 

 

 

 

Attachments (* denotes it comes with unit)

 

 

 

 

 

 

 

 

Dethatcher

N/A

N/A

N/A

N/A

 

 

 

 

 

Mulchmaster Package

71102700

71102700

71102700

71102700

 

 

 

 

 

Leaf Shredder

71102800

71102800

71102800

71102800

 

 

 

 

 

Side Discharge Chute

71102900

71102900

N/A

N/A

 

 

 

 

 

Rear Bagger

71103000

71103000

N/A

N/A

 

 

 

 

 

Swivel Wheel Kit

71103300

71103300

N/A

N/A

 

 

 

 

 

Rear Discharge Chute

71103200

71103200

71103200

71103200

 

 

 

 

 

Rear Roller Kit

71103400

71103400

N/A

N/A

 

 

 

 

 

Mulching Kit

71103500

71103500

N/A

N/A

 

 

 

 

 

3 - 10