Ariens 301-310 User Manual

Size:
784.77 Kb
Download

TABLE OF CONTENTS

Section 1 - Introduction . . . . . . . . . . . . . . . . . 1-3

1.1 The Manual . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.2 Service and Replacement Parts . . . . . . . 1-3

1.3 Product Registration . . . . . . . . . . . . . . . . 1-3

1.4 Unauthorized Replacement Parts . . . . . . 1-3

1.5 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.6 Technical Service Communications . . . . . 1-3

Section 2 - Safety2-4

2.1 Safety Alerts . . . . . . . . . . . . . . . . . . . . . . 2-4

2.2 Signal Words . . . . . . . . . . . . . . . . . . . . . . 2-4

2.3 Notations . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.4 Practices and Laws . . . . . . . . . . . . . . . . . 2-4

2.5 Required Operator Training . . . . . . . . . . . 2-4

2.6 Preparation . . . . . . . . . . . . . . . . . . . . . . . 2-4

2.7 Service Position . . . . . . . . . . . . . . . . . . . . 2-4

2.8 Cleaning and Storage . . . . . . . . . . . . . . . 2-4

2.9 Safety Rules . . . . . . . . . . . . . . . . . . . . . . 2-5

Section 3 - Specifications . . . . . . . . . . . . . . . 3-7

Section 4 - General Maintenance &

Adjustments. . . . . . . . . . . . . . . . . . . . . . . .4-12

4.1 Controls and Features . . . . . . . . . . . . . . .4-12

4.2 Service Positions . . . . . . . . . . . . . . . . . . .4-13

4.3 Filling The Fuel Tank . . . . . . . . . . . . . . . .4-13

4.4 General Lubrication . . . . . . . . . . . . . . . . .4-13

4.5 Mower Belt Adjustment . . . . . . . . . . . . . .4-14

4.6 Clutch and Brake . . . . . . . . . . . . . . . . . . .4-14

4.7 Mower Pan. . . . . . . . . . . . . . . . . . . . . . . .4-15

4.8 Anti-ScalpRollers . . . . . . . . . . . . . . . . . .4-16

4.9 Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16

4.10 Pinion and Steering Adjustment . . . . . .4-17

4.11 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-17

Section 5 - Engine. . . . . . . . . . . . . . . . . . . . . . 5-18

5.1 Engine Troubleshooting . . . . . . . . . . . . . . 5-18

5.2 Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . 5-19

5.3 Changing Oil . . . . . . . . . . . . . . . . . . . . . . 5-19

5.4 Air Cleaner. . . . . . . . . . . . . . . . . . . . . . . .5-19

5.5 Spark Plug . . . . . . . . . . . . . . . . . . . . . . . .5-20

5.6 Muffler . . . . . . . . . . . . . . . . . . . . . . . . . . .5-20

5.7 Engine Removal . . . . . . . . . . . . . . . . . . .5-20

5.8 Engine Replacement . . . . . . . . . . . . . . . .5-20

Section 6 - Mower Deck . . . . . . . . . . . . . . . . .6-22

6.1 Rotary Mower Belt Replacement . . . . . . .6-226.2 Mower Drive BeltReplacement . . . . . . . .6-226.3 MowerBlade . . . . . . . . . . . . . . . . . . . . . .6-226.4 Mower PanRemoval . . . . . . . . . . . . . . . .6-236.5 Linkages for Mower Height/Engagement &Clutch/Brake . . . . . . . . . . . . . . . . . . . . . . . . . .6-236.6 Mower SpindleRemoval . . . . . . . . . . . . .6-25

Section 7 - Steering and Controls . . . . . . . . .7-26

7.1 Steering Shaft Gears . . . . . . . . . . . . . . . .7-26

7.2 Speed Selector . . . . . . . . . . . . . . . . . . . .7-27

Section 8 - Brake and Clutch . . . . . . . . . . . . .8-28

8.1 Brake Disassembly . . . . . . . . . . . . . . . . .8-28

8.2 Clutch and Brake Adjustment . . . . . . . . .8-28

Section 9 - Drive Train . . . . . . . . . . . . . . . . . .9-29

9.1 Rear Axle Disassembly . . . . . . . . . . . . . .9-29

9.2 Gear Case Removal . . . . . . . . . . . . . . . .9-29

9.3 Gear Case Replacement . . . . . . . . . . . . .9-30

9.4 Friction Wheel Replacement . . . . . . . . . .9-30

Section 10 - Bagger. . . . . . . . . . . . . . . . . . . . 10-32

10.1 Vane Installation. . . . . . . . . . . . . . . . . . 10-32

10.2 Bagger Assembly. . . . . . . . . . . . . . . . . 10-32

10.3 Lower Boot Installation. . . . . . . . . . . . . 10-33

Section 11 - Electrical . . . . . . . . . . . . . . . . . . 11-34

11.1 Safety Interlock System . . . . . . . . . . . . 11-34

11.2 Troubleshooting . . . . . . . . . . . . . . . . . . 11-34

11.3 Battery (Electric Start Models) . . . . . . . 11-34

2

SECTION 1 - INTRODUCTION

1.1 THE MANUAL

It is the purpose of this manual to provide complete instructions for service, maintenance, disassembly, repair, and installation of the mechanical components for the 927 Rear Engine Rider Mowers.

Dealer trained service personnel should use this manual as a supplement to and reminder of the training sessions conducted by the company.

Read all information for servicing a part of system before repair work is started to avoid needless disassembly.

Operation

Before operation of the unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance.

Safety Messages

For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals.

Directional Reference

All reference to left, right, front, or rear are given from the operator in the operator position and facing the direction of forward travel.

1.2 SERVICE AND REPLACEMENT PARTS

When ordering publications, replacement parts, or making service inquiries, know the Model and Serial numbers of your unit and engine.

Numbers are located on the product registration form in the unit literature package. They are printed on a serial number label, located on the frame of your unit.

Serial Number

Figure 1

OA0040

1.3 PRODUCT REGISTRATION

A warranty registration card must be filled out, signed, and returned at the time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored.

1.4 UNAUTHORIZED REPLACEMENT PARTS

Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury, or death arising out of the use of unauthorized replacement parts.

1.5 DISCLAIMER

Ariens reserves the right to discontinue, make changes to, and add improvements upon its products at any time without public notice or obligation. The descriptions and specifications contained in this manual were in effect at printing. Equipment described within this manual may be optional. Some illustrations may not be applicable to your unit.

1.6 TECHNICAL SERVICE COMMUNICATIONS

Ariens Technical Service communicates information to the field using Service Letters, Service Bulletins, Product Notices, and Campaigns. Each communication signifies a type of information and priority. The dealer is responsible to carry out the directive provided in the communication. The types of communication are:

Service Letter - General technical information for the dealer. Technical information on how to service the product and product improvements.

Service Bulletin - Notification to update products to resolve certain issues or a notification of a policy change.

Product Notices - Notification of limited product located in a certain region. This is a limited distribution to only those who received the product involved.

Campaigns - Notification of a safety related issue. All product must be updated and are tracked by the factory until all units are corrected.

3

SECTION 2 - SAFETY

2.1 SAFETY ALERTS

Look for these symbols to point out important safety precautions. They mean:

Attention!

Personal Safety Is Involved!

Become Alert!

Obey The Message!

2.2 SIGNAL WORDS

The safety alert symbol is used in decals on the unit and with proper operation procedures in this manual. They alert you to the existence and relative degree of hazards.

Understand the safety message. It contains important information about personal safety on or near the unit.

DANGER: IMMINENTLY HAZARDOUS SITUATION! If not avoided, WILL RESULT in death or serious injury.

WARNING: POTENTIALLY HAZARDOUS SITUATION! If not avoided, COULD RESULT in death or serious injury.

CAUTION: POTENTIALLY HAZARDOUS SITUATION! If not avoided, MAY RESULT in minor or moderate injury. It may also be used to alert against unsafe practices.

2.3 NOTATIONS

NOTE: General reference information for proper operation and maintenance practices.

IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment.

2.4 PRACTICES AND LAWS

Practice usual and customary safe working precautions, for the benefit of yourself and others. Understand and follow all safety messages. Be alert to unsafe conditions and the possibility of minor, moderate, or serious injury or death. Learn applicable rules and laws in your area.

2.5 REQUIRED OPERATOR TRAINING

Original purchaser of this unit was instructed by the seller on safe and proper operation. If unit is to be used by someone other than original purchaser; loaned, rented or sold, ALWAYS provide this manual and any needed safety training before operation.

2.6 PREPARATION

Before starting any removal of parts, proper preparation is very important for efficient work. A clean work area at the start of each job will allow you to perform service repairs easily and quickly.

To reduce the incidence of misplaced tools or parts, place removed components with all attaching hardware in the disassembly order on a clean work surface. Organization is a key part of proper reassembly.

Tools, instruments, and parts needed for the job should be gathered before work is started. Interrupting a job to locate tools or parts is a needless delay. A list of required special tools has been included in this manual.

CAUTION: Remove enough fuel so that no spillage will occur. Remove battery to prevent spillage of electrolyte.

2.7 SERVICE POSITION

Place unit on a flat level surface. ALWAYS stop engine and disengage clutches. Tip up on the service bar for ease of access during some procedures. Assure unit is secure and will not tip over. Strap and clamp onto lift if used.

IMPORTANT: When unit is tipped up onto its service bar, undrained gasoline drawn into cylinder may wash cylinder wall and shorten engine life.

WARNING: AVOID SHARP EDGES which can cut. Movement of parts can cut off fingers or a hand. Wear gloves, and use extreme caution when servicing.

2.8 CLEANING AND STORAGE

IMPORTANT: Never spray unit with water or store unit outdoors to help prevent sealed bearing rust or corrosion. Water can seep into sealed bearings and reduce component life. Bearings are sealed against dirt and debris only.

A unit that is excessively dirty should be cleaned before work starts. Cleaning will occasionally uncover trouble sources. Dirt and abrasive dust reduce the efficient work life of parts and can lead to costly replacement.

When taking unit out of extended storage:

1.Check for any damage or loose parts. Repair, replace, or tighten hardware before operation.

2.If a preservative fluid was used in fuel tank, drain and discard. Fill fuel tank with fresh new fuel.

2 - 4

2.9 SAFETY RULES

Walk Around Inspection

Complete a walk around inspection of unit and work area to understand:

Work area.

Your unit.

All safety decals.

Work Area

ALWAYS check overhead and side clearances carefully before operation. ALWAYS be aware of traffic when operating along streets or curbs.

ALWAYS keep hands and feet within the limits of the unit.

Keep children, people, and animals away. Keep children out of work area and under watchful care of a responsible adult.

Keep area of operation clear of all toys, pets, and debris. Stay alert for hidden hazards.

DO NOT run engine in an enclosed area. Always provide good ventilation.

Unit

ALWAYS keep protective structures, guards, and panels in good repair, in place and securely fastened. NEVER modify or remove safety devices.

Check Safety Interlock System for proper operation daily (see Operation section). Do not operate unless system operates properly.

Operation

Understand:

How to operate all controls

The functions of all controls

How to STOP in an Emergency

Speed ranges

Before starting engine, disengage auxiliary power.

Always back up slowly. Always look down and behind before and while backing.

Never leave a running unit unattended. ALWAYS shut off auxiliary power, lower throttle setting, and stop engine before leaving unit. ALWAYS remove key to prevent unauthorized use.

Never carry passengers on any part of unit.

Avoid uneven and rough terrain. DO NOT operate near drop offs, ditches, or embankments. Unit can suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

ALWAYS operate unit in good visibility and light.

Fuel is highly flammable and its vapors can explode. Use ONLY approved fuel containers.

NO Smoking!

NO Sparks!

NO Flames!

Allow engine to cool before servicing.

NEVER fill fuel tank when engine is running, hot, or unit is indoors.

Abnormal Vibrations are a warning of trouble. Striking a foreign object can damage unit. Stop unit and engine. Wait for all moving parts to stop. Remove wire from spark plug. Inspect unit and make any necessary repairs before restart.

Hazardous Slopes

DO NOT operate on steep slopes. Avoid operating on slopes. When you must operate on a slope, travel up and down the slope. Never operate cross a slope.

Never operate on a slope greater than 10 degrees.

If tires lose traction, turn off auxiliary power and proceed slowly straight down slope. Avoid wet surfaces.

Avoid parking on a slope. If necessary, use wheel chocks.

DO NOT leave unit unattended on a slope. ALWAYS use wheel chocks when leaving unit.

Child Safety

NEVER allow children to operate or play on or near unit. Be alert and shut off unit if children enter area.

Personal Safety

Read and obey all warning, caution, and instructions on the unit and in provided manuals.

Only trained adults may operate unit.

Training includes actual operation.

Clearly understand instructions.

Be alert! Conditions can change.

NEVER operate unit after or during the use of medication, drugs or alcohol. Safe operation requires your complete and unimpaired attention at all times.

NEVER allow anyone to operate the unit when their alertness or coordination is impaired.

DO NOT operate unit without wearing adequate outer garments. Wear adequate safety gear and protective gloves. Wear proper footwear to improve footing on slippery surfaces.

Protect eyes, face, and head from objects that may be thrown from unit. Wear appropriate hearing protection.

Avoid Sharp Edges. Sharp edges can cut. Moving parts can cut or amputate fingers or a hand. Wear gloves to service unit when handling sharp edges.

ALWAYS keep hands away from any pinch points.

ALWAYS keep hands and feet away from all moving parts during operation. Moving parts can cut off body parts.

DO NOT touch unit parts which might be hot from operation. Allow parts to cool before attempting to maintain, adjust, or service.

2 - 5

Controls

Come to a complete stop before reversing.

Never jerk the control levers. Always use a steady even action to achieve smooth control.

Always be aware of obstructions that may cause injury to operator or damage to the unit.

Keep alert with eyes fixed in direction of travel.

Maintenance

ALWAYS maintain unit in safe operating condition. Damaged or worn out muffler can cause fire or explosion.

Check the condition of the unit at the end of each day and repair any damage or defects.

ALWAYS block wheels and know all jack stands are strong and secure and will hold weight of unit during maintenance.

Keep nuts and bolts tight and keep equipment in safe operating conditions.

Before maintenance, adjustments, or service (except where specifically recommended), shut off engine.

Allow hot parts to cool.

Keep unit free of dirt, stones, and other debris. Clean up oil or fuel spills.

Storage

DO NOT store unit inside a building with fuel in the fuel tank where any ignition sources are present. Allow unit to cool completely.

ALWAYS clean unit before extended storage. See Engine Manual for proper storage.

Battery

Avoid Electric Shock. DO NOT reverse battery connections.

Explosive Gases! Poisonous battery fluid contains sulfuric acid and its contact with skin, eyes, or clothing can cause severe burns.

No flames. No sparks. No smoking near battery.

Always wear safety glasses and protective gear near battery.

DO NOT TIP battery beyond a 45o angle in any direction.

ALWAYS KEEP BATTERIES OUT OF REACH of children.

Transport

Use extra care when loading or unloading unit onto trailer or truck. Secure unit chassis to transport vehicle. NEVER secure from rods or linkages that could be damaged.

Attachments and Accessories

Use only attachments or accessories designed for your unit.

2 - 6

SECTION 3 - SPECIFICATIONS

Model Number

927046

927047

927048

927049

Description Name

RM 1028E

RM 1132E

RM 9028E

RM 9030E

 

 

 

 

 

Battery

180 CCA

180 CCA

180 CCA

180 CCA

 

 

 

 

 

Brakes

Drum

Drum

Drum

Drum

 

 

 

 

 

Steering

Gear & Pinion

Gear & Pinion

Gear & Pinion

Gear & Pinion

 

 

 

 

 

Turning Radius - in (cm)

26 (66)

26 (66)

26 (66)

26 (66)

 

 

 

 

 

Tire Size

 

 

 

 

 

 

 

 

 

Front

4.10-3.50x4.00

4.10-3.50x4.00

4.10-3.50x4.00

4.10-3.50x4.00

 

 

 

 

 

Rear

16.6x5x8.00

16.6x5x8.00

16.6x5x8.00

16.6x5x8.00

 

 

 

 

 

Engine - Manufacturer

Briggs & Stratton

Briggs & Stratton

Briggs & Stratton

Briggs & Stratton

 

 

 

 

 

- Cycle

Four

Four

Four

Four

 

 

 

 

 

- Horsepower

10.0

11.0

9.0

9.0

 

 

 

 

 

Starting System

Electric

Electric

Electric

Electric

 

Recoil Back-up

Recoil Back-up

Recoil Back-up

Recoil Back-up

 

 

 

 

 

Fuel Tank Cap. -qt(L)

3 (2.8)

3 (2.8)

3 (2.8)

3 (2.8)

 

 

 

 

 

Fuel

Unleaded

Unleaded

Unleaded

Unleaded

 

 

 

 

 

Idle RPM

1800

1800

1800

1800

 

 

 

 

 

Governed RPM

3250

3250

3250

3250

 

 

 

 

 

Crank Case Cap. - oz (L)

39 (1.2)

39 (1.2)

39 (1.2)

39 (1.2)

 

 

 

 

 

Air Cleaner

Paper Element

Paper Element

Paper Element

Paper Element

 

Foam Precleaner

Foam Precleaner

Foam Precleaner

Foam Precleaner

 

 

 

 

 

Engine Oil Type

SAE 30

SAE 30

SAE 30

SAE 30

 

 

 

 

 

Spark Plug

.030"

.030"

.030"

.030"

 

 

 

 

 

Transmission

Sealed Case

Sealed Case

Sealed Case

Sealed Case

 

 

 

 

 

Speed - Forward Max - mph (kph)

1.6-5.5(2.6-8.8)

1.6-5.5(2.6-8.8)

1.6-5.5(2.6-8.8)

1.6-5.5(2.6-8.8)

 

 

 

 

 

- Reverse Max. - mph (kph)

2.7 (4.3)

2.7 (4.3)

2.7 (4.3)

2.7 (4.3)

 

 

 

 

 

Transmission Lube

150 Grease

150 Grease

150 Grease

150 Grease

 

 

 

 

 

Drive Clutch

Disc-O-Matic

Disc-O-Matic

Disc-O-Matic

Disc-O-Matic

 

 

 

 

 

Tire Pressure

 

 

 

 

 

 

 

 

 

Front

14 PSI

14 PSI

14 PSI

14 PSI

 

 

 

 

 

Rear

14 PSI

14 PSI

14 PSI

14 PSI

 

 

 

 

 

Lift System

Manual

Manual

Manual

Manual

 

 

 

 

 

Power Take Off

Manual

Manual

Manual

Manual

 

 

 

 

 

Mower Deck - Flex & Float

Standard

Standard

Standard

Standard

 

 

 

 

 

- High Performance

Standard

Standard

Standard

Standard

 

 

 

 

 

- Cutting Width - in (cm)

28 (71.1)

32 (81.3)

28 (71.1)

30 (76.2)

 

 

 

 

 

- Cutting Height - in (cm)

1.5-3.5(3.8-11.4)

1.5-3.5(3.8-11.4)

1.5-3.5(3.8-11.4)

1.5-3.5(3.8-11.4)

 

 

 

 

 

- Cut Increments - in (cm)

.5 (1.2)

.5 (1.2)

.5 (1.2)

.5 (1.2)

 

 

 

 

 

Bagger

827026/827013

827026/827013

827026/827013

827020

 

 

 

 

 

Dethatcher Kit

72701300

72701300

72701300

72701300

 

 

 

 

 

Front Weight Kit

72701600

72701600

72701600

72701600

 

 

 

 

 

Leaf Mulcher Kit

N/A

N/A

N/A

72703400

 

 

 

 

 

Grass Mulcher Kit

72703500

72703600

72703500

72701400

 

 

 

 

 

3 - 7

Model Number

927050

927051

927052

927053

Description Name

RM 1232E

RM 1332

RM 1330

RM 9028

 

 

 

 

 

Battery

180 CCA

180 CCA

180 CCA

180 CCA

 

 

 

 

 

Brakes

Drum

Drum

Drum

Drum

 

 

 

 

 

Steering

Gear & Pinion

Gear & Pinion

Gear & Pinion

Gear & Pinion

 

 

 

 

 

Turning Radius - in (cm)

26 (66)

26 (66)

26 (66)

26 (66)

 

 

 

 

 

Tire Size

 

 

 

 

 

 

 

 

 

Front

4.10-3.50x4.00

4.10-3.50x4.00

4.10-3.50x4.00

4.10-3.50x4.00

 

 

 

 

 

Rear

16.6x5x8.00

16.6x5x8.00

16.6x5x8.00

16.6x5x8.00

 

 

 

 

 

Engine - Manufacturer

Briggs & Stratton

Briggs & Stratton

Briggs & Stratton

Briggs & Stratton

 

 

 

 

 

- Cycle

Four

Four

Four

Four

 

 

 

 

 

- Horsepower

12.0

13.0

13.0

9.0

 

 

 

 

 

Starting System

Electric

Electric

Electric

Electric

 

Recoil Back-up

Recoil Back-up

Recoil Back-up

Recoil Back-up

 

 

 

 

 

Fuel Tank Cap. -qt(L)

3 (2.8)

3 (2.8)

3 (2.8)

3 (2.8)

 

 

 

 

 

Fuel

Unleaded

Unleaded

Unleaded

Unleaded

 

 

 

 

 

Idle RPM

1800

1800

1800

1800

 

 

 

 

 

Governed RPM

3250

3250

3250

3250

 

 

 

 

 

Crank Case Cap. - oz (L)

39 (1.2)

39 (1.2)

39 (1.2)

39 (1.2)

 

 

 

 

 

Air Cleaner

Paper Element

Paper Element

Paper Element

Paper Element

 

Foam Precleaner

Foam Precleaner

Foam Precleaner

Foam Precleaner

 

 

 

 

 

Engine Oil Type

SAE 30

SAE 30

SAE 30

SAE 30

 

 

 

 

 

Spark Plug

.030"

.030"

.030"

.030"

 

 

 

 

 

Transmission

Sealed Case

Sealed Case

Sealed Case

Sealed Case

 

 

 

 

 

Speed - Forward Max - mph (kph)

1.6-5.5(2.6-8.8)

1.6-5.5(2.6-8.8)

1.6-5.5(2.6-8.8)

1.6-5.5(2.6-8.8)

 

 

 

 

 

- Reverse Max. - mph (kph)

2.7 (4.3)

2.7 (4.3)

2.7 (4.3)

2.7 (4.3)

 

 

 

 

 

Transmission Lube

150 Grease

150 Grease

150 Grease

150 Grease

 

 

 

 

 

Drive Clutch

Disc-O-Matic

Disc-O-Matic

Disc-O-Matic

Disc-O-Matic

 

 

 

 

 

Tire Pressure

 

 

 

 

 

 

 

 

 

Front

14 PSI

14 PSI

14 PSI

14 PSI

 

 

 

 

 

Rear

14 PSI

14 PSI

14 PSI

14 PSI

 

 

 

 

 

Lift System

Manual

Manual

Manual

Manual

 

 

 

 

 

Power Take Off

Manual

Manual

Manual

Manual

 

 

 

 

 

Mower Deck - Flex & Float

Standard

Standard

Standard

Standard

 

 

 

 

 

- High Performance

Standard

Standard

Standard

Standard

 

 

 

 

 

- Cutting Width - in (cm)

32 (81.3)

32 (81.3)

30 (76.2)

28 (71.1)

 

 

 

 

 

- Cutting Height - in (cm)

1.5-3.5(3.8-11.4)

1.5-3.5(3.8-11.4)

1.5-3.5(3.8-11.4)

1.5-3.5(3.8-11.4)

 

 

 

 

 

- Cut Increments - in (cm)

.5 (1.2)

.5 (1.2)

.5 (1.2)

.5 (1.2)

 

 

 

 

 

Bagger

827026/827013

827026/827013

827020

827026/827013

 

 

 

 

 

Dethatcher Kit

72701300

72701300

72701300

72701300

 

 

 

 

 

Front Weight Kit

72701600

72701600

72701600

72701600

 

 

 

 

 

Leaf Mulcher Kit

N/A

N/A

72703400

N/A

 

 

 

 

 

Grass Mulcher Kit

72703600

72703600

72701400

72703500

 

 

 

 

 

3 - 8

Model Number

927054

927055

927056

927301

Description Name

RM 9030

RM 1332

RM 1330

RM 9028E

 

 

 

 

 

Battery

180 CCA

180 CCA

180 CCA

180 CCA

 

 

 

 

 

Brakes

Drum

Drum

Drum

Drum

 

 

 

 

 

Steering

Gear & Pinion

Gear & Pinion

Gear & Pinion

Gear & Pinion

 

 

 

 

 

Turning Radius - in (cm)

26 (66)

26 (66)

26 (66)

26 (66)

 

 

 

 

 

Tire Size

 

 

 

 

 

 

 

 

 

Front

4.10-3.50x4.00

4.10-3.50x4.00

4.10-3.50x4.00

4.10-3.50x4.00

 

 

 

 

 

Rear

16.6x5x8.00

16.6x5x8.00

16.6x5x8.00

16.6x5x8.00

 

 

 

 

 

Engine - Manufacturer

Briggs & Stratton

Briggs & Stratton

Briggs & Stratton

Briggs & Stratton

 

 

 

 

 

- Cycle

Four

Four

Four

Four

 

 

 

 

 

- Horsepower

9.0

13.0

13.0

9.0

 

 

 

 

 

Starting System

Electric

Electric

Electric

Electric

 

Recoil Back-up

Recoil Back-up

Recoil Back-up

Recoil Back-up

 

 

 

 

 

Fuel Tank Cap. -qt(L)

3 (2.8)

3 (2.8)

3 (2.8)

3 (2.8)

 

 

 

 

 

Fuel

Unleaded

Unleaded

Unleaded

Unleaded

 

 

 

 

 

Idle RPM

1800

1800

1800

1800

 

 

 

 

 

Governed RPM

3250

3250

3250

3000 max.

 

 

 

 

 

Crank Case Cap. - oz (L)

39 (1.2)

39 (1.2)

39 (1.2)

30 (.9)

 

 

 

 

 

Air Cleaner

Paper Element

Paper Element

Paper Element

Paper Element

 

Foam Precleaner

Foam Precleaner

Foam Precleaner

Foam Precleaner

 

 

 

 

 

Engine Oil Type

SAE 30

SAE 30

SAE 30

SAE 30

 

 

 

 

 

Spark Plug

.030"

.030"

.030"

.030"

 

 

 

 

 

Transmission

Sealed Case

Sealed Case

Sealed Case

Sealed Case

 

 

 

 

 

Speed - Forward Max - mph (kph)

1.6-5.5(2.6-8.8)

1.6-5.5(2.6-8.8)

1.6-5.5(2.6-8.8)

1.5-5.1(2.4-8.2)

 

 

 

 

 

- Reverse Max. - mph (kph)

2.7 (4.3)

2.7 (4.3)

2.7 (4.3)

2.5 m(4.0)

 

 

 

 

 

Transmission Lube

150 Grease

150 Grease

150 Grease

150 Grease

 

 

 

 

 

Drive Clutch

Disc-O-Matic

Disc-O-Matic

Disc-O-Matic

Disc-O-Matic

 

 

 

 

 

Tire Pressure

 

 

 

 

 

 

 

 

 

Front

14 PSI

14 PSI

14 PSI

14 PSI

 

 

 

 

 

Rear

14 PSI

14 PSI

14 PSI

14 PSI

 

 

 

 

 

Lift System

Manual

Manual

Manual

Manual

 

 

 

 

 

Power Take Off

Manual

Manual

Manual

Manual

 

 

 

 

 

Mower Deck - Flex & Float

Standard

Standard

Standard

Standard

 

 

 

 

 

- High Performance

Standard

Standard

Standard

Standard

 

 

 

 

 

- Cutting Width - in (cm)

30 (76.2)

32 (81.3)

30 (76.2)

28 (71.1)

 

 

 

 

 

- Cutting Height - in (cm)

1.5-3.5(3.8-11.4)

1.5-3.5(3.8-11.4)

1.5-3.5(3.8-11.4)

1.5-3.5(3.8-11.4)

 

 

 

 

 

- Cut Increments - in (cm)

.5 (1.2)

.5 (1.2)

.5 (1.2)

.5 (1.2)

 

 

 

 

 

Bagger

827020

827026/827013

827020

827026/827013

 

 

 

 

 

Dethatcher Kit

72701300

72701300

72701300

72701300

 

 

 

 

 

Front Weight Kit

72701600

72701600

72701600

72701600

 

 

 

 

 

Leaf Mulcher Kit

72703400

N/A

72703400

N/A

 

 

 

 

 

Grass Mulcher Kit

72701400

72703600

72701400

72703500

 

 

 

 

 

3 - 9

Model Number

927302

927303

927304

927305

Description Name

RM 1228E

RM 1232E

RM 1328

RM 1332

 

 

 

 

 

Battery

180 CCA

180 CCA

180 CCA

180 CCA

 

 

 

 

 

Brakes

Drum

Drum

Drum

Drum

 

 

 

 

 

Steering

Gear & Pinion

Gear & Pinion

Gear & Pinion

Gear & Pinion

 

 

 

 

 

Turning Radius - in (cm)

26 (66)

26 (66)

26 (66)

26 (66)

 

 

 

 

 

Tire Size

 

 

 

 

 

 

 

 

 

Front

4.10-3.50x4.00

4.10-3.50x4.00

4.10-3.50x4.00

4.10-3.50x4.00

 

 

 

 

 

Rear

16.6x5x8.00

16.6x5x8.00

16.6x5x8.00

16.6x5x8.00

 

 

 

 

 

Engine - Manufacturer

Briggs & Stratton

Briggs & Stratton

Briggs & Stratton

Briggs & Stratton

 

 

 

 

 

- Cycle

Four

Four

Four

Four

 

 

 

 

 

- Horsepower

12.0

12.0

13.0

13.0

 

 

 

 

 

Starting System

Electric

Electric

Electric

Electric

 

Recoil Back-up

Recoil Back-up

Recoil Back-up

Recoil Back-up

 

 

 

 

 

Fuel Tank Cap. -qt(L)

3 (2.8)

3 (2.8)

3 (2.8)

3 (2.8)

 

 

 

 

 

Fuel

Unleaded

Unleaded

Unleaded

Unleaded

 

 

 

 

 

Idle RPM

1800

1800

1800

1800

 

 

 

 

 

Governed RPM

2930 max.

2850 max.

3250

3250 max.

 

 

 

 

 

Crank Case Cap. - oz (L)

39 (1.2)

39 (1.2)

39 (1.2)

39 (1.2)

 

 

 

 

 

Air Cleaner

Paper Element

Paper Element

Paper Element

Paper Element

 

Foam Precleaner

Foam Precleaner

Foam Precleaner

Foam Precleaner

 

 

 

 

 

Engine Oil Type

SAE 30

SAE 30

SAE 30

SAE 30

 

 

 

 

 

Spark Plug

.030"

.030"

.030"

.030"

 

 

 

 

 

Transmission

Sealed Case

Sealed Case

Sealed Case

Sealed Case

 

 

 

 

 

Speed - Forward Max - mph (kph)

1.4-5.0(2.3-8.0)

1.4-4.8(2.3-7.7)

1.6-5.5(2.6-8.8)

1.6-5.5(2.6-8.8)

 

 

 

 

 

- Reverse Max. - mph (kph)

2.4 (3.9)

2.4 (3.9)

2.7 (4.3)

2.7 (4.3)

 

 

 

 

 

Transmission Lube

150 Grease

150 Grease

150 Grease

150 Grease

 

 

 

 

 

Drive Clutch

Disc-O-Matic

Disc-O-Matic

Disc-O-Matic

Disc-O-Matic

 

 

 

 

 

Tire Pressure

 

 

 

 

 

 

 

 

 

Front

14 PSI

14 PSI

14 PSI

14 PSI

 

 

 

 

 

Rear

14 PSI

14 PSI

14 PSI

14 PSI

 

 

 

 

 

Lift System

Manual

Manual

Manual

Manual

 

 

 

 

 

Power Take Off

Manual

Manual

Manual

Manual

 

 

 

 

 

Mower Deck - Flex & Float

Standard

Standard

Standard

Standard

 

 

 

 

 

- High Performance

Standard

Standard

Standard

Standard

 

 

 

 

 

- Cutting Width - in (cm)

28 (71.1)

32 (81.3)

28 (71.1)

32 (81.3)

 

 

 

 

 

- Cutting Height - in (cm)

1.5-3.5"(3.8-11.4)

1.5-3.5"(3.8-11.4)

1.5-3.5"(3.8-11.4)

1.5-3.5"(3.8-11.4)

 

 

 

 

 

- Cut Increments - in (cm)

.5 (1.2)

.5 (1.2)

.5 (1.2)

.5 (1.2)

 

 

 

 

 

Bagger

827026/827013

827026/827013

827026/827013

827026/827013

 

 

 

 

 

Dethatcher Kit

72701300

72701300

72701300

72701300

 

 

 

 

 

Front Weight Kit

72701600

72701600

72701600

72701600

 

 

 

 

 

Leaf Mulcher Kit

N/A

N/A

N/A

N/A

 

 

 

 

 

Grass Mulcher Kit

72703500

72703600

72703500

72703600

 

 

 

 

 

3 - 10