Aquatic LUXEAIR 22 AI22lux6636 User Manual

Size:
215.06 Kb
Download

luxeair 22

luxeAir Series Model # ai22lux6636

Pump

Deck Width 1 3/4”

Back Angle

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35º

18”

 

22”

36”

 

 

 

 

42”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blower

No alternate pump/blower locations available.

66 1/4”

 

 

 

 

 

 

 

36”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

23 3/4”

22”

20 1/4”

SPECIFICATIONS:

General Specifications:

Tub Size

66 1/4” x 36” x 23 3/4”

 

168 cm x 91 cm x 60 cm

Bathing Well

42” long

 

22” wide

 

22” interior depth

Shipping Weight

248 lbs. / 112 kg

Weight w/Equipment

179 lbs. / 81 kg

Tub Weight Filled

885 lbs. / 401 kg

Gallons to Overflow

85 gal. / 322 L

Gallons to Operate

66 gal. / 250 L

Electrical Specifications:

 

Pump

1.75 HP; 12 AMP; 110V

Inline Heater

1.5 kW; 12.5 AMP; 110V

Requirement

1-15AMP 2 pole, separate circuit

 

required protected with Class A GFCI

Blower

1 HP; 10.5 AMP; 110V

Requirement

1-15AMP 1 pole, separate circuit

 

required protected with Class A GFCI

This whirlpool will need to be hard wired to the breaker box. Three outlets will be supplied on the whirlpool.

Standard equipment:

7 Hydrotherapy Jets including:

-4 Full Size Pressure-FloHydrotherapy Jets

-2 StressEaz Neck & Shoulder Therapy Jets

-1 Recessed Rotary Massage Jet

Air Bath System:

-55 Air Jets

-1 HP Variable Speed Air Blower with 20-MinuteTimer

-Electronic Control Panel

-3 Massage Settings: Constant, wave and pulse

-Automatic Purge and Dry Cycle

-600 Watt Air Heating System

Aquatic Quality Features:

-1.75 HP Run-DryPump with20-MinuteTimer

-1.5 kW Inline Maintenance Heater

-”Quiet Pad” anti-vibrationpump mount for quiet pump operation

-2 Color Matched Grab Bars

-2 Arm Rests

-Slip Resistant Floor

-Pre-leveledABS Support Base

-Heat-bentrigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-Available in 8 Standard No-ChargeColors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

Rough-InPlumbing

Measurements

12”

2 1/4”

optional equipment:

Chromatherapy LED Lighting

Comfort Pillow - Oval or Rectangle

Jet Finish

-Chrome, Polished Brass, Gold, Polished Nickel or Satin Nickel

Grab Bar

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or

Color Matched (Bone, White and Biscuit only)

Hand Held Jet - Chrome or Polished Brass

Factory Installed Rigid ABS Tile Flange

Color Matched Acrylic Skirt

Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

Fax-On-Demand

Document # 1206

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

32

March 2008