Aquatic HOTSOAK 90 MOTIF AI32AIR6036HS User Manual

Size:
217.66 Kb
Download

hotsoak 90 Motif

hotsoak SERIEs Model # AI32AIR6036HS / AI32AIR6036TO (Tub Only)

Deck

Total

Width 3”

Width 5”

2

36 1/2”

Back Angle 12˚

1

56”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rough-InPlumbing

 

 

 

60 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

36 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Measurements

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25”

 

 

 

 

 

 

 

 

 

 

14”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20 1/2”

 

 

 

 

 

 

 

 

22 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

33 1/2”

 

 

 

 

 

57”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SPECIFICATIONS:

General Specifications:

Tub Size

60

1/2” x 36 1/2” x 25”

 

153.7 cm x 92.7 cm x 63.5 cm

Bathing Well

37.5” long

 

19” wide

 

22

3/4” interior depth

Maximum Water Depth

17

3/4”

Shipping Weight

172 lbs. / 78 kg

Tub Weight Filled

720 lbs. / 327 kg

Tub Only Weight

85 lbs. / 39 kg

Weight w/Equipment

106 lbs. / 48 kg

Gallons to Overflow

74 gal. / 281 L

Electrical Specifications:

Pump

1/15 HP; 1.3 AMP; 110V

Heater

1.5 kW; 12.5 AMP; 110V

Requirements

20 AMP; 110V, separate circuit

 

required protected w/ Class A GFCI

This unit is not recommended for shower installations.

Standard equipment:

Aquatic Quality Features:

-1.5 kW Inline Maintenance Heater

-Run-DryPump with20-MinuteTimer

-2 Circulation Portal Covers

-Bath-sideOn/Off Electronic Button

-“Quiet Pad” Anti-VibrationPump Mount for Quiet Operation

-Slip Resistant Floor

-Extra Deep Bathing Well

-Pre-leveledABS Support Base

-Heat-bentrigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-ChargeColors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

Chromatherapy*

Comfort Pillow - Oval or Rectangle

Bolt-OnGrab Bar

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit only)

Optional Pump Location

Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

*Thiswhirlpoolwillneedtobehardwiredtothebreakerbox. Three outlets will be supplied on the whirlpool.

Fax-On-Demand

Document #1307

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. Aquatic Industries, Inc. assumes no responsibility for preparatory work.

The dimensions needed for site preparation and structure building should be measured from the tub; www.aquaticwhirlpools.com 800.555.5324

January 2008