Aquatic HOTSOAK 85 ai6032SvhS User Manual

202.72 Kb

hotsoak 85

hotsoak series Model # ai6032Svhs

Deck Width

1 1/2”


31 1/2”


59 1/2”








31 1/2”




































































































17 1/4”











8 3/4”









































18 1/2”

15 5/8”





















1 3/4”




















General Specifications:

Tub Size


1/2” x 31 1/2” x 18 1/2”


151 cm x 80 cm x 47 cm

Bathing Well


3/8” long



1/2” wide



5/8” interior depth

Shipping Weight

167 lbs. / 76 kg

Tub Weight Filled

512 lbs. / 232 kg

Tub Only Weight

87 lbs. / 39 kg

Gallons to Overflow

45 gal. / 170 L

Gallons to Operate

26 gal. / 98 L

Electrical Specifications:


1/15 HP; 1.3 AMP; 110V


1.5 kW; 12.5 AMP; 110V


20 AMP; 110V, separate circuit


required protected w/ Class A GFCI


Document #1260

Standard equipment:

Aquatic Quality Features:

-1.5 kW Inline Maintenance Heater

-Run-DryPump with20-MinuteTimer

-2 Circulation Portal Covers

-Bath-sideOn/Off Electronic Button

-“Quiet Pad” Anti-VibrationPump Mount for Quiet Operation

-Slip Resistant Floor

-2 Arm Rests

-Extra Deep and Long Bathing Well

-Pre-leveledABS Support Base

-Heat-bentrigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-ChargeColors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

Chromatherapy LED Lighting*

Comfort Pillow - Oval or Rectangle

Bolt-OnGrab Bars

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit only)

Factory Installed Rigid ABS Tile Flange

Optional Pump Location

Color Matched Acrylic Skirt

Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

*Thiswhirlpoolwillneedtobehardwiredtothebreakerbox. Three outlets will be supplied on the whirlpool.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. 800.555.5324

August 2008