Aquatic HOTSOAK 76 AI21AIR7242CHS User Manual

Size:
205.06 Kb
Download

hotsoak 76

hotsoak series Model # AI21AIR7242CHS

Two Person Bath

Deck Width

4 3/4”

 

24 3/4”

 

 

 

 

41 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

43 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Deck Width 4 1/4”

71 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rough-InPlumbing

 

 

 

 

 

 

 

 

41 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Measurements

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21”

 

 

 

 

 

 

 

22”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

68 3/8”

 

 

 

 

 

 

 

 

 

38 3/4”

 

 

 

 

 

 

 

 

 

 

 

 

2 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SPECIFICATIONS:

General Specifications:

Tub Size

71

1/4” x 41 1/2” x 24”

 

181 cm x 105 cm x 61 cm

Bathing Well

43

1/2” long

 

24

3/4” wide

 

21

1/4” interior depth

Shipping Weight

188 lbs. / 85.5 kg

Tub Weight Filled

1359 lbs. / 618 kg

Tub Weight Only

138 lbs. / 63 kg

Gallons to Overflow

163 gal. / 618 L

Electrical Specifications:

Pump

1/15 HP; 1.3 AMP; 110V

Heater

1.5 kW; 12.5 AMP; 110V

Requirements

20 AMP; 110V, separate circuit

 

required protected w/ Class A GFCI

Fax-On-Demand

Document #1251

Standard equipment:

Aquatic Quality Features:

-1.5 kW Inline Maintenance Heater

-Run-DryPump with20-MinuteTimer

-2 Circulation Portal Covers

-Bath-sideOn/Off Electronic Button

-“Quiet Pad” Anti-VibrationPump Mount for Quiet Operation

-Slip Resistant Floor

-Extra Deep and Long Bathing Well

-Pre-leveledABS Support Base

-Heat-bentrigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-ChargeColors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

Chromatherapy LED Lighting*

Comfort Pillow - Oval or Rectangle

Bolt-OnGrab Bars

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit only)

Integral Tiling Flange (Customer must specify which side(s) should receive flange)

Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

*Thiswhirlpoolwillneedtobehardwiredtothebreakerbox. Three outlets will be supplied on the whirlpool.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

120

August 2008