Aquatic HOTSOAK 69 AI16AIR7036HS User Manual

Size:
222.57 Kb
Download

hotsoak 69

hotsoak series Model # AI16AIR7036HS

Two Person Bath

1

2

 

 

 

35 3/4”

 

 

35 1/8”

 

 

70 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35 3/4”

 

 

Rough-InPlumbing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Measurements

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24 3/4”

 

 

 

 

 

 

 

 

 

12”

 

 

 

 

 

 

 

 

21 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

65”

 

 

 

 

 

 

23 1/2”

 

 

 

32”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 3/8”

SPECIFICATIONS:

General Specifications:

Tub Size

70

1/4” x 35 3/4” x 24 3/4”

 

178 cm x 91 cm x 63 cm

Bathing Well

45

3/4” long

 

19” wide

 

22

3/4” interior depth

Shipping Weight

146 lbs. / 66 kg

Tub Weight Filled

828 lbs. / 376 kg

Gallons to Overflow

80 gal. / 303 L

Electrical Specifications:

Pump

1/15 HP; 1.3 AMP; 110V

Heater

1.5 kW; 12.5 AMP; 110V

Requirements

20 AMP; 110V, separate circuit

 

required protected w/ Class A GFCI

This unit is not recommended for shower installations.

Fax-On-Demand

Document #1244

Standard equipment:

Aquatic Quality Features:

-1.5 kW Inline Maintenance Heater

-Run-DryPump with20-MinuteTimer

-2 Circulation Portal Covers

-Bath-sideOn/Off Electronic Button

-“Quiet Pad” Anti-VibrationPump Mount for Quiet Operation

-Slip Resistant Floor

-4 Arm Rests

-Extra Deep and Long Bathing Well

-Pre-leveledABS Support Base

-Color Matched Grab Bar

-Heat-bentrigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-ChargeColors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

Chromatherapy LED Lighting*

Comfort Pillow - Oval or Rectangle

Grab Bar

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit only)

Optional Pump Location

Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

*Thiswhirlpoolwillneedtobehardwiredtothebreakerbox. Three outlets will be supplied on the whirlpool.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

August 2008

113