Aquatic HOTSOAK 64 AI5AIR6636HS User Manual

219.95 Kb

hotsoak 64

hotsoak series Model # AI5AIR6636HS

35 3/8”

Deck Width 2”

65 3/4”

35 3/8”

Rough-InPlumbing Measurements
















20 1/8”











1 3/4”


General Specifications:

Tub Size

65 3/4” x 35 3/8” x 23”


167 cm x 90 cm x 58 cm

Bathing Well

44” long


25” wide


21 3/4” interior depth

Shipping Weight

209 lbs. / 95 kg

Tub Weight Filled

806 lbs. / 366 kg

Tub Only Weight

117 lbs. / 53 kg

Gallons to Overflow

85 gal. / 322 L

Electrical Specifications:


1/15 HP; 1.3 AMP; 110V


1.5 kW; 12.5 AMP; 110V


20 AMP; 110V, separate circuit


required protected w/ Class A GFCI

This unit is not recommended for shower installations.

Standard equipment:

Aquatic Quality Features:

-1.5 kW Inline Maintenance Heater

-Run-DryPump with20-MinuteTimer

-2 Circulation Portal Covers

-Bath-sideOn/Off Electronic Button

-“Quiet Pad” Anti-VibrationPump Mount for Quiet Operation

-Raised Seat

-Slip Resistant Floor

-2 Arm Rests

-Extra Deep and Long Bathing Well

-Pre-leveledABS Support Base

-2 Color Matched Grab Bars

-Heat-bentrigid PVC piping for optimum sanitary conditions

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-ChargeColors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

Chromatherapy LED Lighting*

Comfort Pillow - Oval or Rectangle

Grab Bar

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit only)

Factory Installed Rigid ABS Tile Flange

Color Matched Acrylic Skirt

Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

*Thiswhirlpoolwillneedtobehardwiredtothebreakerbox. Three outlets will be supplied on the whirlpool.


Document #1239

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. 800.555.5324


August 2008