century 31
Century SERIEs Model # AI7048rc31
Two Person Bath
2 |
3 |
|
47 1/2”
1 |
4 |
|
Fill Spout Location |
*Not available without Fast-Fill Waterfall Spout.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
47 1/2” |
|
Rough-In Plumbing |
|
|
|
|
69 1/2” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Measurements |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
27 1/2” |
|
|
12 3/8” |
||||
29” |
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
23 1/4” |
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22” |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 1/8” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPECIFICATIONS:
General Specifications:
Tub Size |
69 1/2” x 47 1/2” x 29” |
|
|
177 cm x 121 cm x 74 cm |
|
Bathing Well |
43” long |
|
|
33” wide |
|
|
23 1/2” interior depth |
|
Shipping Weight |
239 lbs. / 108 kg |
|
Tub Weight Filled |
1157 lbs. / 525 kg |
|
Weight w/Equipment |
178 lbs. / 81 kg |
|
Gallons to Overflow |
118 gal. / 447 L |
|
Gallons to Operate |
1 bather: |
99 gal. / 375 L |
|
2 bathers: |
80 gal. / 303 L |
Electrical Specifications:
Pump |
2 HP; 11 AMP; 110V |
Requirement |
15 AMP; 110V, separate circuit |
|
required protected w/ Class A GFCI |
Inline Heater |
1.5 kW; 12 AMP; 110V |
Requirement |
15 AMP; 110V, separate circuit |
|
required protected w/ Class A GFCI |
This unit is not recommended for shower installations.
This unit has a 3/4” female waterfall fill spout connection.
Standard equipment:
12 Hydrotherapy Jets including:
-4 Full Size Pressure-Flo Hydrotherapy Jets
-4 Pressure Plus Hydrotherapy Jets
-3 Recessed Rotary Massage Jets
-1 Recessed Fan Jet
Aquatic Quality Features:
-2 HP, 3-Speed Run-Dry Pump
-Bath-side Electronic Control Panel
-Integrally Molded Fast-Fill Waterfall Spout (valves not included)
-Chromatherapy
-1.5 kW Inline Maintenance Heater
-”Quiet Pad” anti-vibration pump mount for quiet pump operation
-2 Extra Deep & Wide Contoured Lounge Seats
-Color Matched or Chrome Bolt-On Grab Bar
-4 Arm Rests
-Slip Resistant Floor
-Pre-leveled ABS Support Base
-Heat-bent rigid PVC piping for optimum sanitary conditions
-Durable, easy to clean, Lucite® Cast Acrylic Surface
-Available in 8 Standard No-Charge Colors
UL & IAPMO Listed, Factory Tested
Limited Lifetime Warranty
optional equipment:
•Comfort Pillow -- Oval or Rectangle
•Jet Finish
-Chrome, Polished Brass, Gold, Polished Nickel or Satin Nickel
•Bolt-On Grab Bar
-White, Biscuit, Chrome, Polished Brass, Satin Nickel, Polished Nickel,
Oil Rubbed Bronze or Gold
•Lift & Turn Waste and Overflow
-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
•Cable Drive Waste and Overflow
-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or Color Matched (Bone, White and Biscuit only)
•Hand Held Jet - Chrome or Polished Brass
•Optional Pump Location
•Remote Pump Location
•Color Matched Curved Acrylic Skirt
•Premium colors
All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.
Fax-On-Demand
Document # 1015
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324
March 2008 |
25 |