Aquatic AI6060FDNSYTO, AI6060FDNSY User Manual

Size:
214.24 Kb
Download
21”
19 1/2”
17 1/4”
Standard equipment:
8 Hydrotherapy Jets including:
- 4 Spinning Back Jets - 4 Directional Jets
Aquatic Quality Features:
- .80 HP Run-Dry Pump
- Bath-Side On/Off Air Button
- ”Quiet Pad” anti-vibration pump mount for quiet pump operation
- Heat-bent rigid PVC piping for optimum sanitary conditions - 4 Arm Rests
- Color Matched Trim and Jets (Select Colors)
- Durable, easy to clean, Lucite® Cast Acrylic Surface - Available in 8 Standard No-Charge Colors
UL and IAPMO Listed, Factory Tested Limited 10 Year Warranty

SYMPHONY 19

SYMPHONY SERIES Model # AI6060fdnSY / AI6060fdnSYTO

59 1/2”

59 1/2”

32”

 

 

29 1/4”

 

29 1/4”

 

39”

 

40”

24”

2

1

50”

7”

26”

83 1/4”

SPECIFICATIONS:

General Specifications:

Tub Size

59

1/2” x 59 1/2” x 21”

 

151 cm x 151 cm x 53 cm

Bathing Well

40” long

 

 

17

1/2” wide

 

19

3/8” interior depth

Maximum Water Depth

16”

 

Shipping Weight

217 lbs. / 98 kg

Tub Weight Filled

741 lbs. / 336 kg

Tub Only Weight

193 lbs. / 88 kg

Gallons to Overflow

89 gal. / 337 L

Gallons to Operate

1 bather:

65 gal. / 246 L

 

2 bathers:

50 gal. / 189 L

Electrical Specifications:

Pump

.80 HP; 5.5 AMP; 110V

Requirement

15

AMP; 110V, separate circuit

required protected w/ Class A GFCI

Fax-On-Demand

Document # 1287

Two Person Bath

58 1/2”

Rough-InPlumbing

Measurements

29 1/4”

9 7/8”

optional equipment:

Comfort Pillow--Ovalor Rectangle

Bolt-OnGrab Bars

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

1.5 kW Inline Maintenance Heater (Pump Options 1, 2)

Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Satin Nickel, Polished Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Satin Nickel, Polished Nickel, Oil Rubbed Bronze or

Color Matched (Bone, White and Biscuit only)

2-TIntegral Tile Flange

Optional Pump Location

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

146

February 2008