Aquatic AI27AIRCOPPER User Manual

Size:
224.15 Kb
Download

Serenity 27

Serenity Air Baths Model # AI27AIRCOPPER / AI27COPPERTO (Tub Only)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

36”

 

 

52 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Back Angle 14º

Back Angle 14º

Note: Because the Serenity 27 is a one-of-a-kindhandmade bath, dimensions may vary up to several inches. Please take all measurements directly from the bath.

72”

36”

27”

22 1/2”

54”

note: This model can be ordered with or without decorative rings.

Two Person Bath

Note: This model requires a remote blower location. The connection for the air blower is under the tub; the blower may be placed up to 15 feet away and connected by piping under the floor. Please refer to the Owner’s Manual for detailed installation instructions. Document #1172 on our Fax-onDemand System or on our website at www.aquaticwhirlpools.com.

36”

Rough-InPlumbing

Measurements

11 1/4”

26”

1 3/4”

SPECIFICATIONS:

General Specifications:

Tub Size

72” x 36” x 36”

 

183 cm x 91 cm x 91 cm

Bathing Well

52 1/2” long

 

25” wide

 

 

22” interior depth

Maximum Water Depth

16 3/4”

 

Shipping Weight

451 lbs. /

205 kg

Tub Weight Filled

1181 lbs. / 515 kg

Tub Only Weight

185 lbs. /

84 kg

Gallons to Overflow

120 gal. /

454 L

Electrical Specifications:

Standard equipment:

Air Bath System:

-1 HP Variable Speed Remote Air Blower with 20-MinuteTimer

-600 Watt Air Heating System

-Electronic Control Package with wave and pulse Features

-Automatic Purge and Dry Cycle

-Waterproof Remote Control with Infrared Sensor and 25’ Cord

-Waste and Overflow in Oil Rubbed Bronze

Aquatic Quality Features:

- Extra Deep and Long Bathing Well

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

Blower/Heater

1 HP; 10.5 AMP; 120V

Requirement

15 AMP; 120V, separate circuit

 

required protected w/ Class A GFCI

optional equipment:

This model can be ordered with or without decorative rings.

Each Serenity 27 bath is handcrafted out of copper. Please note that the hammered copper with a weathered finish will vary from model to model and may gradually change with time due to copper’s unique character.

Fax-On-Demand

Document # 1007

Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

June 2008

95