Aquatic AI21AIR7242C User Manual

Size:
205.7 Kb
Download

Serenity studio 21

Serenity STUDIO Model # AI21AIR7242C / AI21AIR7242CTO (Tub Only)

Two Person Bath

Deck Width

4 3/4”

24 3/4”

 

 

43 1/2”

 

41 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Deck Width 4 1/4”

 

 

 

 

 

 

 

 

 

 

71 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rough-InPlumbing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

41 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Measurements

 

 

 

 

 

 

 

 

 

 

 

 

 

24”

12 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21”

 

22”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

68 3/8”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

38 3/4”

 

 

 

2 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SPECIFICATIONS:

General Specifications:

Tub Size

71

1/4” x 41 1/2” x 24”

 

181 cm x 105 cm x 61 cm

Bathing Well

43

1/2” long

 

24

3/4” wide

 

21

1/4” interior depth

Shipping Weight

188 lbs. / 85.5 kg

Tub Weight Filled

1491 lbs. / 618 kg

Tub Weight Only

138 lbs. / 63 kg

Gallons to Overflow

163 gal. / 618 L

Electrical Specifications:

Blower/Heater

1 HP; 10.5 AMP; 120V

Requirement

15 AMP; 120V, separate circuit

 

required protected w/ Class A GFCI

Fax-On-Demand

Document # 1001

Standard equipment:

Air Bath System:

-73 Air Jets

-1 HP Variable Speed Air Blower with 20-MinuteTimer

-600 Watt Air Heating System

-Electronic Control Package with wave and pulse Features

-Automatic Purge and Dry Cycle with Water Sensors

Aquatic Quality Features:

-Chromatherapy

-Slip Resistant Floor

-Air Channels Lined with Antimicrobial Coating

-Pre-leveledABS Support Base

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-ChargeColors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

Comfort Pillow - Oval or Rectangle

Bolt-OnGrab Bars

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel Satin Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or

Color Matched (Bone, White and Biscuit only)

Waterproof Remote Control with infrared sensor and 25’ cord

Remote Blower Wiring Kit

Factory Installed Tile Flange

Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

Each Serenity Studio model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

March 2008

89