Aquatic AI18AIR7242TO User Manual

Size:
209.76 Kb
Download

Serenity studio 18

Serenity STUDIO Model # AI18AIR7242 / AI18AIR7242TO (Tub Only)

Deck Width

4 1/2”

24”

42”

48”

Back Angle 23.7º

Deck Width 4”

 

72”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

42”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

24”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

21”

 

 

 

 

 

 

 

 

22 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

68 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

38”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: Serenity tub only models feature a

Pre-leveledABS Support Base.

SPECIFICATIONS:

Rough-InPlumbing

Measurements

11 1/2”

3”

General Specifications:

Tub Size

72” x 42” x 24”

 

189 cm x 107 cm x 56 cm

Bathing Well

48” long

 

24” wide

 

22” interior depth

Maximum Water Depth

17”

Shipping Weight

265 lbs. / 97 kg

Tub Weight Filled

1128 lbs. / 428 kg

Tub Only Weight

182 lbs. / 74 kg

Weight w/Equipment

182 lbs. / 97 kg

Gallons to Overflow

114 gal. / 428 L

Electrical Specifications:

Blower/Heater

1 HP; 10.5 AMP; 120V

Requirement

15 AMP; 120V, separate circuit

 

required protected w/ Class A GFCI

Fax-On-Demand

Document # 1202

Standard equipment:

Air Bath System:

-84 Air Jets

-1 HP Variable Speed Air Blower with 20-MinuteTimer

-600 Watt Air Heating System

-Electronic Control Package with wave and pulse Features

-Automatic Purge and Dry Cycle with Water Sensors

Aquatic Quality Features:

-Chromatherapy

-Slip Resistant Floor

-Air Channels Lined with Antimicrobial Coating

-Pre-leveledABS Support Base

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-ChargeColors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

Comfort Pillow - Oval or Rectangle

Bolt-OnGrab Bars

-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Lift & Turn Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze

Cable Drive Waste and Overflow

-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or

Color Matched (Bone, White and Biscuit only)

Waterproof Remote Control with infrared sensor and 25’ cord

Remote Blower Wiring Kit

Integral Tiling Flange (Customer must specify which side(s) should receive flange)

Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

86

June 2008