Aquatic AI10AIR7240 User Manual

Size:
204.71 Kb
Download

Blower

Connection

Serenity 10

Serenity Air Baths Model # AI10AIR7240 / AI10AIR7240TO (Tub Only)

Two Person Bath

39 5/8”

5”

Note: The interior of bathing well and outside of bathing well can each be specified in a different color. Only one premium color upcharge will be applied if one or more premium colors are used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: This model requires a remote blower location. The connection for the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

air blower is under the tub; the blower may be placed up to 15 feet away

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and connected by piping under the floor. Please refer to the Owner’s Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

for detailed installation instructions. Document #1184 on our Fax-onDemand

 

71 3/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

System or on our website at www.aquaticwhirlpools.com.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rough-InPlumbing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Measurements

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

29 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12 1/8”

 

 

 

 

 

 

 

 

 

 

 

 

26 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

25 1/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30 1/2”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 3/4”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SPECIFICATIONS:

General Specifications:

Tub Size

71 3/4” x 39 5/8” x 29 1/4”

 

182 cm x 101 cm x 74 cm

Bathing Well

43” long

 

22 1/2” wide

 

21” interior depth

Maximum Water Depth

16 1/2”

Shipping Weight

517 lbs. / 234 kg

Tub Weight Filled

798 lbs. / 363 kg

Tub Only Weight

194 lbs. / 88 kg

Gallons to Overflow

76 gal. / 288 L

Electrical Specifications:

Blower/Heater

1 HP; 10.5 AMP; 120V

Requirement

15 AMP; 120V, separate circuit

 

required protected w/ Class A GFCI

Standard equipment:

Air Bath System:

-60 Air Jets

-1 HP Variable Speed, Remote Air Blower with 20-MinuteTimer

-600 Watt Air Heating System

-Electronic Control Package with wave and pulse Features

-Automatic Purge and Dry Cycle

-Waterproof Remote Control with infrared sensor and 25’ cord

Aquatic Quality Features:

-Claw Feet Available in Chrome, Polished Brass, Satin Nickel, Polished Nickel, Oil Rubbed Bronze and White

-Air Channels Lined with Antimicrobial Coating

-Extra Deep Bathing Well

-Durable, easy to clean, Lucite® Cast Acrylic Surface

-available in 8 Standard No-ChargeColors

UL & IAPMO Listed, Factory Tested

Limited Lifetime Warranty

optional equipment:

Comfort Pillow - Oval or Rectangle

Waste and Overflow for Freestanding Models

-Chrome, Polished Brass, Satin Nickel, Polished Nickel, Oil Rubbed Bronze or White

Premium colors

All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.

Fax-On-Demand

Document #1189

Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air temperature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.

The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. www.aquaticwhirlpools.com 800.555.5324

January 2008

79