Apple CPX3 User Manual

Size:
4.27 Mb
Download

Projector

CPX3

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

WARNING ►Before using this product, please read all manuals for this product. Be sure to read “Safety Guide” first. After reading them, store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are described below.

WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

Please refer to the pages written following this symbol.

NOTE • The information in this manual is subject to change without notice.

The manufacturer assumes no responsibility for any errors that may appear in this manual.

The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.

Trademark acknowledgment

Mac is registered trademarks ofApple Computer, Inc.

VESAand SVGAare trademarks of the Video Electronics StandardAssociation.

Windows is a registered trademark of Microsoft Corporation.

HDMI, the HDMI logo and High-DefinitionMultimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

All other trademarks are the properties of their respective owners.

Content

Content

 

 

EASY MENU.. .. .. .. .. .. .. .. .. .. .. .. .. ..

About this manual. . . . . . . . . . 1

21

Content. . . . . . . . . . . . . . . . . . . 2

Aspect, Auto keystone execute,

 

Projector features. . . . . . . . . . 3

Keystone

, Picture mode, Brightness,

Contrast, Color, Tint, Sharpness,

 

Preparations. . . . . . . . . . . . . . . 3

Whisper, Mirror, Reset, Filter time,

 

Contents of package. . . . . .

.

3

Language, Go to Advanced Menu...

 

Fastening the lens cover. . . . .

 

.3

PICTURE Menu. . . . . . . . . . . . 23

Replacing the filter cover for

 

 

Brightness, Contrast, Gamma, Color temp,

 

bottom-upuse . . . . . . . .

 

.3

 

 

Color, Tint, Sharpness, My memory

 

 

Part names. . . . . . . . . . . . . . . . 4

IMAGE Menu. . . . . . . . . . . . . . 26

Projector. . . . . . . . . . .

 

.4

Aspect, Over scan, V position, H position,

Control panel. . . . . . . . .

.

5

H phase, H size, Auto adjust execute

 

Remote control. . . . . . . .

.

5

 

INPUT Menu . . . . . . . . . . . . . . 28

Setting up. . . . . . . . . . . . . . . . . 6

Progressive, Video nr, Color space,

 

Arrangement. . . . . . . . .

.

6

Video format, Hdmi, Frame lock,

 

 

Connecting your devices. . . . .

 

.8

 

 

 

Computer in, Resolution

 

 

Connecting power supply. . . .

.10

SETUP Menu. . . . . . . . . . . . . . 31

Using the security slot. . . . . .

 

10

Remote control.. . . . . . . . . . . 11

Auto keystone execute, Keystone

,

Whisper, Mirror, Standby mode

 

 

Putting batteries . . . . . . . .

 

11

AUDIO Menu. . . . . . . . . . . . . . 33

About the remote control signal. .

.11

Changing the frequency of remote

 

12

Volume, Audio, Hdmi audio

 

 

control signal. . . . . . . . .

 

SCREEN Menu.. . . . . . . . . . . . 34

Using as a

 

 

Language, Menu position, Blank,

 

simple PC mouse & keyboard. . 12

Start up, MyScreen, MyScreen Lock,

Power on/off . . . . . . . . . . . . . . 13

Message, Source name, Template

 

Turning on the power. . . . . .

.13

OPTION Menu. . . . . . . . . . . . . 38

Turning off the power. . . . . .

.13

Auto search, Auto keystone

,

 

Operating . . . . . . . . . . . . . . . . 14

Auto on, Auto off, Lamp time,

 

 

Adjusting the volume. . . . . .

.14

Filter time, My button, My source,

 

Temporarily muting the sound. . .

 

14

Service, Security

 

 

Selecting an input signal. . . . .

 

14

C..C.. (closed caption) menu . . . 51

Searching an input signal. . . .

.15

Display, Mode, Channel

 

 

Selecting an aspect ratio. . . . .

 

15

Maintenance.. . . . . . . . . . . . . 52

Adjusting the projector's elevator .

.16

Lamp. . . . . . . . . . . . .52

Adjusting the zoom and focus. . .

 

16

Air filter . . . . . . . . . . . .54

Using the automatic adjustment feature.

.17

Other care. . . . . . . . . .

.55

Adjusting the position . . . . . .

 

17

Troubleshooting. . . . . . . . . . . 56

Correcting the keystone distortions.

.18

Using the magnify feature. . . .

.18

Related messages. . . . . . .

.56

Freezing the screen. . . . . . .

 

19

Regarding the indicator lamps. . .

57

Temporarily blanking the screen. .

 

19

Shutting the projector down. . . .

58

Using the menu function . . . . .

 

20

Resetting all settings. . . . . .

.58

 

 

 

Phenomena that may be easy

 

 

 

 

 

to be mistaken for machine defects. .59

 

 

 

Specifications.. . . . . . . . .

. . .

61

Projector features / Preparations

Projector features

This projector has a capability to project various picture signals onto a screen. This projector requires only a minimal amount of space for installation and can produce a large projected image from even a short distance. The compact and light body of the projector can give a benefit to mobile users to carry it to anywhere comfortably.

üThe WXGA (1280x800) native resolution can support Widescreen PCs to realize your original images on a screen.

üThe HDMI port can support various image equipment which have digital interface to get clearer pictures on a screen.

Preparations

Contents of package

Please see the “Contents of package” in the “User’s Manual (concise)” which is a book. Your projector should come with the items shown there. Contact immediately your dealer if anything is missing.

NOTE • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens.

Fastening the lens cover

Strap hole

To avoid losing the lens cover, please fasten the

 

lens cover to the projector using the enclosed strap.

 

1. Fix the strap to the strap hole of the lens cover. Thread one end of the strap through the strap

hole of the lens cover and make the loop at the end, and let the other end of the strap through the loop.

Not have a knot in the strap at either end.

Strap hole

2. Fix the strap to the strap hole of the projector.

Thread the other end of the strap through the strap hole of the projector and make the loop there. Let the lens cover with the one end of strap though the loop.

Replacing the filter cover for bottom-upuse

For the projector installed bottom-up,please replace the filter cover with the enclosed filter cover forbottom-upuse, to keep

necessary ventilation space.

Please refer to the “Air filter” (54) for how to detach and attach a filter cover.

WARNING ►Consult with your dealer

Filter cover

before a special installation such as

 

suspending from a ceiling.

 

Part names

Part names

Projector

(1)Lamp cover (52) The lamp unit is inside.

(2)Focus ring (16)

(3)Zoom ring (16)

(4)Control panel (5)

(5)Speaker (32)

(6)Elevator knobs (x 2) (16)

(7)Elevator feet (x 2) (16)

(8)Lens (13, 55)

(9)Lens cover (3)

(10)Intake vents

(11)Filter cover (54)

The air filter and intake vent are inside.

(12)Exhaust vents

(13)AC inlet (10)

(14)VIDEO port (8)

(15)S-VIDEOport (8)

(16)Security slot (10)

(17)COMPUTER IN1 port (8)

(18)Shutdown switch (58)

(19)COMPUTER IN2 port (8)

(20)USB port (8)

(21)HDMI port (8)

(22)AUDIO IN port (8)

(23)AUDIO OUT port (8)

HOT! (1)

(2) (3) (4)

(5)

(7)

(10)

 

(6)

 

(9) (8) (11)

(7)

(Bottom)

(13)

(12)

(14)(15)(16)(17)(18)(19) (20) (21) (23) (22)

 

COMPUTER IN1 COMPUTER IN2

USB

HDMI

AUDIO OUT

 

 

 

 

 

 

 

S-VIDEO

 

 

 

AUDIO IN

K

 

 

 

VIDEO

 

 

 

 

WARNING HOT! : Do not touch around the lamp cover and the exhaust

vents during use or just after use, since it is too hot.

►Do not look into the lens or vents while the lamp is on, since the strong light is not good for your eyes.

►Do not handle the elevator knobs without holding the projector, since the projector may drop down.

CAUTION ►Maintain normal ventilation to prevent the projector from heating up. Do not cover, block or plug up the vents. Do not place anything that can stick or be sucked to the vents, around the intake vents. Clean the air filter periodically.

►Do not use the security slot to prevent the projector from falling down, since it is not designed for it.

►Use the shutdown switch only when the projector is not turned off by normal procedure, since pushing this switch stops operation of the projector without cooling it down.

Control panel

Part names

(1)

(2)

(3)

(4)

(5)

(6)

(1)STANDBY/ON button (13)

(2)INPUT/ENTER button (14, 20)

(3)MENU button (20)

It consists of four cursor buttons.

(4)POWER indicator (13, 57)

(5)TEMP indicator (57)

(6)LAMP indicator (57)

Remote control

STANDBY/ON

INPUT/

LAMP

ENTER

 

 

MENU

TEMP

 

 

POWER

(1) VIDEO button (15)

(2)

(2) COMPUTER button (14)

 

(3) MY SOURCE/DOC.CAMERA button (15)

(1)

(4) STANDBY/ON button (13)

(6)

(5) ASPECT button (15)

(5)

(6) AUTO button (17)

(11)

(7) SEARCH button (15)

(9)

(8) BLANK button (19)

(10)

(9) MAGNUFY - ON button (12, 18)

(16)

(10)

MAGNIFY - OFF button (12)

(17)

(11) FREEZE button (19)

(20)

(12)

PAGE UP button (12)

(22)

(13) PAGE DOWN button (12)

 

(14)

VOLUME + button (14)

(24)

(15)

VOLUME - button (12, 14)

 

(16)

KEYSTONE button (18)

 

(17)

MY BUTTON - 1 button (40)

 

(18)

MY BUTTON - 2 button (40)

 

(19)

MUTE button (14)

 

(20)

POSITION button (17)

 

(21)

MENU button (20)

 

(22)

▲/▼/◄/► cursor buttons (12, 20)

 

(23)

ENTER button (12, 20)

 

(24)

ESC button (12, 20)

 

(25)

RESET button (12, 20)

 

(26)

Battery cover (11)

 

NOTE • The COMPUTER button on the remote control

is button for selecting only a PC input. This model does not have any function about STORAGE device.

 

 

 

 

(3)

 

 

 

 

(4)

VIDEO

 

MY SOURCE/

 

(7)

COMPUTER DOC.CAMERA

 

ASPECT

AUTO

SEARCH

BLANK

(8)

 

 

 

 

(12)

MAGNIFY

FREEZE

PAGE

VOLUME

(14)

ON

 

UP

 

 

 

 

 

(15)

OFF

 

DOWN

 

KEYSTONE

MY BUTTON

MUTE

(13)

 

1

2

 

(19)

 

 

 

 

 

 

 

(18)

POSITION

 

 

MENU

(21)

 

ENTER

 

 

ESC

 

 

RESET

 

(23)

(25)

Back of

the remote control

(26)

Setting up

Setting up

Install the projector according to the environment and manner the projector will be used in.

Arrangement

Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1280x800.

(a)Screen size (diagonal)

(b)Projection distance (±10%)

(c)Screen height (±10%)

On a horizontal surface

 

 

B

A

16:10

C

 

 

 

Suspended from the ceiling

A

4:3

C

 

 

B

 

 

Keep a space of 30 cm or more between the sides of the projector and other objects such as walls.

Consult with your dealer before a special installation such as suspending from a ceiling.

 

A

 

 

 

16:10 screen

 

 

 

 

4:3 screen

 

 

Screen size

B

Projection distance

C Screen

B Projection distance

C Screen

(diagonal)

min.

max.

height

min.

max.

height

inch

 

m

m

 

inch

m

inch

cm

inch

m

inch

m

inch

cm

inch

30

 

0.8

0.9

 

37

1.1

45

40

16

1.1

42

1.3

51

46

18

40

 

1.0

1.3

 

50

1.5

60

54

21

1.4

57

1.7

68

61

24

50

 

1.3

1.6

 

62

1.9

75

67

26

1.8

71

2.2

85

76

30

60

 

1.5

1.9

 

75

2.3

90

81

32

2.2

85

2.6

102

91

36

70

 

1.8

2.2

 

88

2.7

106

94

37

2.5

100

3.0

120

107

42

80

 

2.0

2.6

 

101

3.1

121

108

42

2.9

114

3.5

137

122

48

90

 

2.3

2.9

 

113

3.5

136

121

48

3.3

128

3.9

154

137

54

100

 

2.5

3.2

 

126

3.8

151

135

53

3.6

143

4.4

171

152

60

120

 

3.0

3.8

 

151

4.6

182

162

64

4.4

171

5.2

206

183

72

150

 

3.8

4.8

 

189

5.8

228

202

79

5.4

215

6.5

258

229

90

200

 

5.1

6.4

 

253

7.7

304

269

106

7.3

286

8.7

344

305

120

250

 

6.4

8.0

 

316

9.6

380

337

132

9.1

358

10.9

430

381

150

300

 

7.6

9.6

 

380

11.6

456

404

159

10.9

430

13.1

516

457

180

Setting up

Arrangement (continued)

WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock.

Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined stand.

Do not place the projector on its side, front or rear position.

Consult with your dealer before a special installation such as suspending from a ceiling or somewhere else.

►Place the projector in a cool place, and ensure that there is sufficient ventilation. The high temperature of the projector could cause fire, burns and/ or malfunction of the projector.

Do not stop-up,block or otherwise cover the projector's vents.

Keep a space of 30 cm or more between the sides of the projector and other objects such as walls.

Do not place the projector on metallic thing or anything weak in heat.

Do not place the projector on carpet, cushions or bedding.

Do not place the projector in direct sunlight or near hot objects such as heaters.

Do not anything near the projector lens or vents, or on top of the projector.

Do not place anything that may be sucked into or stick to the vents on the bottom of the projector. This projector has some intake vents also on the bottom.

►Do not place the projector anyplace where it may get wet. Getting the projector wet or inserting liquid into the projector could cause fire, electric shock and/or malfunction of the projector.

Do not place the projector in a bathroom or the outdoors.

Do not place anything containing liquid near the projector.

CAUTION ►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector.

• Do not place the projector near humidifiers, smoking spaces or a kitchen. ►Position the projector to prevent light from directly hitting the projector's remote sensor.

Setting up

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect.

Please refer to the following illustrations to connect them.

VCR/DVD player

 

 

 

 

 

 

PC

 

 

 

Speakers

 

 

 

 

 

 

 

 

 

(with an amplifier)

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO OUT COMPONENT AUDIO OUT VIDEO OUT L R CR/PR CB/PB Y L R

AUDIO OUT S-VIDEOOUT

 

 

 

 

 

 

L

R

RGB OUT

AUDIO

USB-A

RGB OUT

AUDIO

AUDIO

 

 

OUT

OUT

IN

 

 

 

 

 

or

IN1 COMPUTER IN2

USB

 

S-VIDEOK

VIDEO

AUDIO OUT

AUDIO IN

DVI OUT

Monitor

HDMI OUT

 

NOTE The COMPUTER IN1 port can support a component signal also. For more information, please see the description of the COMPUTER IN item of the INPUT menu (29).

WARNING ►Do not disassemble or modify the projector and accessories.

►Be careful not to damage the cables, and do not use damaged cables. CAUTION ►Turn off all devices and unplug their power cords prior to

connecting them to projector. Connecting a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction or damage to the device and the projector.

►Use appropriate accessory or otherwise designed cables. Ask your dealer about non-accessorycables which may have to be of a specific length or equipped with a core. For cables with a core only at one end, connect the end with the core to the projector.

►Make sure that devices are connected to the correct ports. An incorrect connection may result in malfunction or damage to the device and the projector.

Setting up

Connecting your devices (continued)

NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution.

-Some signal may need an adapter to input this projector.

-Some PCs have multiple screen display modes that may include some signals which are not supported by this projector.

-Although the projector can display signals with resolution up to UXGA (1600X1200),

the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and the projector panel are identical.

While connecting, make sure that the shape of the cable's connector fits the port to connect with. And be sure to tighten the screws on connectors with screws.

When connecting a laptop PC to the projector, be sure to activate the PC’s external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC.

When the picture resolution is changed on a pc depending on an input, automatic adjustment function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original. It might be recommended to use other CRT or LCD monitors to change the resolution.

In some cases, this projector may not display a proper picture or display any picture on screen. For example, automatic adjustment may not function correctly with some input signals. An input signal of composite sync or sync on G may confuse this projector, so the projector may not display a proper picture.

The HDMI port of this model is compatible with HDCP (High-bandwidthDigital Content Protection) and therefore capable of displaying a video signal from HDCP compatible DVD players or the like.

About Plug-and-Playcapability

Plug-and-Playis a system composed of a PC, its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible.Plug-and-Playcan be used by connecting this projector to a pc that is VESA DDC (display data channel) compatible.

Take advantage of this feature by connecting an RGB cable to the COMPUTER IN1 port (DDC 2B compatible). Plug-and-Playmay not work properly if any other type of connection is attempted.

Please use the standard drivers in your pc as this projector is a Plug-and-Playmonitor.

NOTE for HDMI

The HDMI supports the following signals.

-Videosignal : 525i(480i),525p(480p),625i(576i),750p(720p),1125i(1080i),1125p(1080p)

-PCsignals : See User’s Manual (detailed) Technical-Audiosignal : Format Linear PCM

Sampling Frequency 48kHz / 44.1kHz / 32kHz

This projector can be connected with another equipment that has HDMI or DVI connector, but with some equipment the projector may not work properly, something like no video or no audio.

Be sure to use an HDMI cable that has the HDMI logo.

When the projector is connected with a device having DVI connector, use a DVI to HDMI cable to connect with the HDMI input and an audio cable to connect with one of the Audio input.

Setting up

Connecting power supply

POWER

Put the connector of the power cord into

indicator

 

1. the AC inlet of the projector.

POWER

Firmly plug the power cord’s plug into

AC inlet

2. the outlet. In a couple of seconds after

Connector of the

the power supply connection, the POWER

power cord

indicator will light up in steady orange.

to the outlet

 

Please remember that when the AUTO ON function (38) activated, the connection of the power supply make the projector turn on.

WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.

Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

Only plug the power cord into an outlet rated for use with the power cord's specified voltage range. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation.

Never modify the power cord.

Using the security slot

Security slot

This product has the security slot for the Kensington lock. For details, see the manual of the security tool.

WARNING ►Do not use the security slot to

prevent the projector from falling down, since it is not designed for it.

NOTE • The security slot is not comprehensive theft prevention measures. It is intended to be used as supplemental theft prevention measure.

10