Apple CP-X3021WN User Manual

Size:
2.88 Mb
Download

Projector

CP-X2021WN/CP-X2521WN/

CP-X3021WN

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

WARNING ►Before using this product, please read all manuals for this product. Be sure to readSafety Guide first. After reading them, store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are described below.

WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.

CAUTION This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.

NOTICE This entry notices of fear of causing trouble.

Please refer to the pages written following this symbol.

NOTE • The information in this manual is subject to change without notice.

The illustrations in this manual are for illustrative purposes. They may differ slightly from your projector.

The manufacturer assumes no responsibility for any errors that may appear in this manual.

The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent.

Trademark acknowledgment

Mac® is a registered trademark of Apple Inc.

Windows®, DirectDraw® and Direct3D® are registered trademarks of Microsoft Corporation in the U.S. and/or other countries.

VESA and DDC are trademarks of the Video Electronics Standard Association.

HDMI, the HDMI logo, and High-DefinitionMultimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Blu-rayDiscTM andBlu-rayTM are trademarks ofBlu-rayDisc Association.

All other trademarks are the properties of their respective owners.

1

Contents

 

 

Introduction . . . . . . . . . . . . . . . 3 SETUP menu . . . . . . . . . . . . . . 43

Features . . . . . . . . . . . . . . . . . . . . . . 3 Checking the contents of package. . . 3 Part names . . . . . . . . . . . . . . . . . . . . 4

AUTO KEYSTONE, KEYSTONE, AUTO ECO MODE,

ECO MODE, INSTALLATION, STANDBY MODE,

MONITOR OUT

Setting up . . . . . . . . . . . . . . . . . 7 AUDIO menu . . . . . . . . . . . . . . 46

Arrangement . . . . . . . . . . . . . . . . . . . 7

Connecting with your devices . . . . . 10 Connecting to a power supply. . . . . 15 Fastening the adapter cover . . . . . . 16 Using the security bar and slot . . . . 16

Remote control . . . . . . . . . . . . 17

VOLUME, SPEAKER, AUDIO SOURCE,

HDMI AUDIO

SCREEN menu. . . . . . . . . . . . . 47

LANGUAGE, MENU POSITION, BLANK,

START UP, MyScreen, MyScreen Lock,

MESSAGE, SOURCE NAME, TEMPLATE, C.C.

Installing the batteries. . . . . . . . .

. . 17

OPTION menu .

 

. . . . . . . . .

. . . 53

About the remote control signal . . . 17

A

UTO SEARCH

, A

UTO KEYSTONE

 

Using as a simple PC mouse & keyboard

18

 

 

 

 

 

,

 

D

IRECT POWER ON

, A

UTO POWER OFF

,

. . . . . . . . . . . . .Power on/off

. 19

USB TYPE B, LAMP TIME, FILTER TIME,

Turning on the power . . . . . . . . . .

. 19

MY BUTTON, MY SOURCE, SERVICE

 

Turning off the power . . . . . . . . . .

. 20

NETWORK menu . . . . . . . .

. . . 63

Operating . . . . . . . . . . . . . . .

. 21

WIRELESS SETUP, WIRELESS INFORMATION,

Adjusting the volume. . . . . . . . . . .

. 21

WIRED SETUP, WIRED INFORMATION,

 

Temporarily muting the sound. . . .

. 21

PROJECTOR NAME, MY IMAGE, AMX D.D.,

Selecting an input signal. . . . . . . .

. 22

PRESENTATION, SERVICE

 

Searching an input signal . . . . . . .

. 23

SECURITY menu . . . . . . . .

. . . 74

Selecting an aspect ratio. . . . . . . .

. 23

SECURITY PASSWORD CHANGE,

 

Adjusting the projector's elevator . . 24

MYSCREEN PASSWORD, PIN LOCK,

 

Adjusting the zoom and focus. . . .

. 24

TRANSITION DETECTOR, MY TEXT PASSWORD,

Using the automatic adjustment feature. .

. 25

M

Y TEXT DISPLAY

 

Y TEXT WRITING

 

Adjusting the position

25

 

 

, M

 

 

 

Presentation tools . . . . . .

. . . 80

Correcting the keystone distortions.

. 26

PC-LESSPresentation. . .

. . . . 80

Using the magnify feature. . . . . . .

. 27

Thumbnail Mode, Full Screen Mode,

Temporarily freezing the screen . .

. 28

Slideshow Mode, Playlist

 

Temporarily blanking the screen

. . 28

USB Display.

.

.

. . . . . . . . . . .

. . . .89

Using the menu function . . . . . . .

. 29

Starting USB Display,

 

EASY MENU. . . . . . . . . . . . . .

. 31

Right-Clickmenu, Floating menu,

ASPECT, AUTO KEYSTONE, KEYSTONE,

 

Options window

 

 

 

PICTURE MODE, ECO MODE, INSTALLATION,

Maintenance .

.

 

. . . . . . . . .

. . . 93

RESET, FILTER TIME, LANGUAGE,

 

Replacing the lamp . . . . . . . . .

. . . . 93

ADVANCED MENU, EXIT

33

Cleaning and replacing the air filter . . 95

PICTURE menu . . . . . . . . . . .

Other care.

. .

.

.

.

. . . . . . . . . .

. . . . 97

BRIGHTNESS, CONTRAST, GAMMA, COLOR TEMP,

Troubleshooting . . . . . . . .

. . . 98

COLOR, TINT, SHARPNESS, MY MEMORY

36

Related messages . . . . . . . . .

. . . . 98

IMAGE menu . . . . . . . . . . . . .

Regarding the indicator lamps . . . 100

ASPECT, OVER SCAN, V POSITION, H POSITION,

Resetting all settings. . . . . . . .

. . . 102

H PHASE, H SIZE, AUTO ADJUST EXECUTE

Phenomena that may be easy

 

INPUT menu . . . . . . . . . . . . .

. 39

 

 

to be mistaken for machine defects. 102

PROGRESSIVE, VIDEO NR, COLOR SPACE,

 

Specifications .

 

. . . . . . . . .

. . 107

VIDEO FORMAT, HDMI FORMAT, HDMI RANGE,

COMPUTER IN, FRAME LOCK, RESOLUTION

2

Introduction

Introduction

Features

The projector provides you with the broad use by the following features.

This projector has a variety of I/O ports that supposedly cover for any business scene. The HDMI port can support various image equipment which have digital interface to get clearer pictures on a screen.

If you insert a USB storage device, such as a USB memory, into the USB TYPE A port and select the port as the input source, you can view images stored in the device.

This projector can be controlled and monitored via LAN connection. Furthermore, you can use the designated USB wireless adapter (optional) to establish wireless LAN connection.

This compact, lightweight projector uses a front exhaust system that keeps the user comfortable by directing hot air away from the user.

Checking the contents of package

Please see the Contents of packagesection in the User’s Manual (concise)which is a book. Your projector should come with the items shown there. Require of your dealer immediately if any items are missing.

WARNING ►Keep small parts away from children and pets. Take care not to put in the mouth. If swallowed, consult a physician immediately for emergency treatment.

NOTE • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens.

• The projector may make a rattling sound when tilted, moved or shaken, since a flap to control the air flow inside of the projector has moved. Be aware that this is not a failure or malfunction.

3

Introduction

Part names

(1) Lamp cover (93)

The lamp unit is inside.

(2)FOCUS ring (24)

(3)ZOOM ring (24)

(4)Control panel (5)

(5)Elevator buttons (x 2) (24)

(6)Elevator feet (x 2) (24)

(7)Remote sensor (17)

(8)Lens (97)

(9)Intake vents

(10)Filter cover (95)

The air filter and intake vent are

inside.

(11)Speaker (46)

(12)Exhaust vent

(13)AC IN (AC inlet) (15)

(14)Rear panel (5)

(15)Security bar (16)

(16)Security slot (16)

HOT! (1) (2) (3)

 

(4)

 

 

(11)

 

 

(9)

 

 

(15)

(6)

 

(10)

 

(5)

 

 

(8)

(7)

(6)

HOT! (12)

 

 

 

 

(5)

 

 

(9)

(13)(16)

(14)

WARNING ►Do not open or remove any portion of the product, unless the manuals direct it.

►Do not subject the projector to unstable conditions. ►Do not apply a shock or pressure to this product.

►Do not look into the lens and the openings on the projector while the lamp is on.

CAUTION ►Do not touch around the lamp cover and the exhaust

vents during use or just after use, since it is too hot. ►Do not attach anything onto the lens except the lens cover of this

projector because it could damage the lens, such as melting the lens.

(continued on next page)

4

Part names (continued)

Control panel

(1)STANDBY/ON button (19)

(2)INPUT button (22, 29)

(3)MENU button (29)

It consists of four cursor buttons.

(4)ECO button(56, 57)

(5)POWER indicator (19, 100)

(6)TEMP indicator (100)

(7)LAMP indicator (100)

Introduction

(4)

(5)(6)(7)

(1) (2) (3)

Rear panel (11 ~ 14)

(1)

LAN port

(8)

AUDIO IN2 port

(2)

USB TYPE A port

(9)

COMPUTER IN1 port

(3)

HDMI port

(10)

COMPUTER IN2 port

(4)

USB TYPE B port

(11) AUDIO OUTport

(5)

VIDEO port

(12)

MONITOR OUT port

(6)

S-VIDEOport

(13)

CONTROL port

(7)

AUDIO IN1 port

 

 

 

(1)

(2)

(3)

 

 

(4)

(5)

(6)

(7) (8)

(9)

 

 

 

 

 

 

(10)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI

USB

 

 

USB

COMPUTER IN1

COMPUTER IN2

TYPE A

TYPE B

DC5V 0.5A

 

S-VIDEO

AUDIO IN1

LAN

 

 

VIDEO

AUDIO IN2

AC IN

 

AUDIO OUT MONITOR OUT

CONTROL

 

(11)(12) (13)

(continued on next page)

5

Introduction

Part names (continued)

Remote control

(1)VIDEO button (22)

(2)COMPUTER button (22)

(3)SEARCH button (23)

(4)STANDBY/ONbutton (19)

(5)ASPECT button (23)

(6)AUTO button (25)

(7)BLANK button (28)

(8)MAGNIFY - ONbutton (27)

(9)MAGNIFY - OFFbutton (27)

(10)MY SOURCE/DOC.CAMERAbutton (22, 57)

(11)VOLUME - button (21)

(12)PAGE UP button (18)

(13)PAGE DOWN button (18)

(14)VOLUME + button (21)

(15)MUTE button (21)

(16)FREEZE button (28)

(17)MY BUTTON - 1button (56, 57)

(18)MY BUTTON - 2button (56, 57)

(19)KEYSTONE button (26)

(20)POSITION button (25, 29)

(21)MENU button (29)

(22)▲/▼/◄/► cursor buttons (29)

(23)ENTER button (29)

(24)ESC button (29)

(25)RESET button (29)

(26)Battery cover (17)

(2)

(1)

VIDEO

COMPUTER MY SOURCE/

(6)

 

DOC.CAMERA

 

 

(5)

ASPECT

AUTO SEARCH BLANK

 

(16)MAGNIFYFREEZEPAGEVOLUMEUPON

(8)

OFF

DOWN

(9)

KEYSTONE

MY BUTTON MUTE

(19)

 

 

(17)

 

 

(20)

POSITION

MENU

 

 

(22)

 

ENTER

 

 

(24)

ESC

RESET

 

 

Back of

the remote control

(10)

(4)

(3)

(7)

(12)

(14)

(11)

(13)

(15)

(18)

(21)

(23)

(25)

(26)

6

Setting up

Setting up

Install the projector according to the environment and manner the projector will be used in.

For the case of installation in a special state such as ceiling mount, the specified mounting accessories (Specifications in theUser’s Manual (concise)) and service may be required. Before installing the projector, consult your dealer about your installation.

Arrangement

Refer to tables T-1 andT-2 at the back ofUser's Manual (concise) as well as the following to determine the screen size and projection distance.

The values shown in the table are calculated for a full size screen.

a Screen size (diagonal)

b Projection distance (±10%, from the projector’s end) c1 , c2 Screen height (±10%)

If the projector is used at an altitude of about 1600 m (5250 feet) or higher, set ALTITUDE of the SERVICE item in the OPTION menu to HIGH (57).

Otherwise, set it to NORMAL. If the projector is used with a wrong setting, it may cause damage to the projector itself or the parts inside.

(continued on next page)

7

Setting up

Arrangement (continued)

WARNINGInstall the projector where you can access the power outlet easily.If an abnormality should occur, unplug the projector urgently. Otherwise it could cause a fire or electric shock.

Do not subject the projector to unstable conditions.If the projector falls or topples over, it could result in injury or damage to the projector and the surrounding things. Using a damaged projector could result in a fire and an electric shock.

Do not place the projector in unstable places, such as an inclined surface, places subject to vibration, on top of a wobbly table or cart, or a surface that is smaller than the projector.

Do not put the projector on its side, front or rear position.

Do not attach nor place anything on the projector unless otherwise specified in the manual.

Do not use any mounting accessories except the accessories specified by the manufacturer. Read and keep the manuals of the accessories used.

For special installation such as ceiling mounting, be sure to consult your dealer beforehand.

Do not install the projector near thermally conductive or flammable things.Such things when heated by the projector could result in a fire and burns.

• Do not place the projector on a metal stand.

Do not place the projector where any oils, such as cooking or machine oil, are used.Oil may harm the product, resulting in malfunction, or falling from the mounted position.

Do not place the projector in a place where it may get wet.Getting the projector wet or inserting liquid into the projector could cause a fire and an electric shock, and damage the projector.

Do not place the projector near water, such as in a bathroom, kitchen, or poolside.

Do not place the projector outdoors or by the window.

Do not place anything containing liquid near the projector.

(continued on next page)

8

Setting up

Arrangement (continued)

CAUTIONPlace the projector in a cool place with sufficient ventilation.The projector may shutdown automatically or may malfunction if its internal temperature is too high.

Using a damaged projector could result in a fire and an electric shock.

Do not place the projector in direct sunlight or near hot objects such as heaters.

Do not place the projector where the air from an air conditioner or similar unit will blow on it directly.

Keep a space of 30 cm or more between a side of the projector and other objects such as walls.

Do not place the projector on carpet, cushions or bedding.

Do not stop up, block nor cover the projector's vent holes. Do not place anything around the projector that could be sucked in or stuck to the projector's intake vents.

Do not place the projector at places that are exposed to magnetic fields, doing

so can cause the cooling fans inside the projector to malfunction.

Avoid placing the projector in smoky, humid or dusty place.Placing the projector in such places could cause a fire, an electric shock and malfunction of the projector.

Do not place the projector near humidifiers. Especially for an ultrasonic humidifier, chlorine and minerals contained in tap water are atomized and could be deposited in the projector causing image degradation or other problems.

NOTICE • Do not place the projector in a smoking area, kitchen, passageway or by the window.

Position the projector to prevent light from directly hitting the projector's remote sensor.

Do not place the product in a place where radio interference may be caused.

Check and correct the setting for ALTITUDE of SERVICE in the OPTION menu according to the usage environment (57). If the projector is used with a wrong setting, it may cause damage to the projector itself or the parts inside.

Keep heat-sensitivethings away from the projector. Otherwise, they may be damaged by the heat from the projector.

9

Setting up

Connecting with your devices

Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device.

Consult your dealer when the required accessory did not come with the product or the accessory is damaged.

After making sure that the projector and the devices are turned off, perform the connection, according to the following instructions. Refer to the figures in subsequent pages.

Before connecting the projector to a network system, be sure to read Network Guide too.

WARNINGUse only the appropriate accessories.Otherwise it could cause a fire or damage the projector and devices.

Use only the accessories specified or recommended by the projector’s manufacturer. It may be regulated under some standard.

Neither disassemble nor modify the projector and the accessories.

Do not use the damaged accessory. Be careful not to damage the accessories. Route a cable so that it is neither stepped on nor pinched out.

CAUTIONFor a cable with a core at only one end, connect the end with the core to the projector.That may be required by EMI regulations.

NOTE • Do not turn on or off the projector while connected to a device in operation, unless that is directed in the manual of the device. Otherwise it may cause malfunction in the device or projector.

The function of some input ports can be selected according to your usage requirements. Check the reference page indicated beside each port in the following illustration.

Be careful not to mistakenly connect a connector to a wrong port. Otherwise it may cause malfunction in the device or projector.

- When connecting a connector to a port, make sure that the shape of the connector fits the port.

- Tighten the screws to connect a connector equipped with screws to a port. - Use the cables with straight plugs, not L-shapedones, as the input ports of the projector are recessed.

About Plug-and-Playcapability

Plug-and-Playis a system composed of a computer, its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible.Plug-and-Playcan be used by connecting this projector to a computer that is VESA DDC (display data channel) compatible.

-Take advantage of this feature by connecting a computer cable to the COMPUTER IN1 port (DDC 2B compatible).Plug-and-Playmay not work properly if any other type of connection is attempted.

-Please use the standard drivers in your computer as this projector is a Plug- and-Playmonitor.

(continued on next page)

10