Installation and Operation
Smart-UPS®
Uninterruptible Power Supply
Tower/Rack-Mount 2U
SURTA 1500XL/1500RMXL2U/1500XLJ
2200XL/2200RMXL2U
100/120 Vac
su0541a
This manual and the safety guide are available in English on the enclosed CD and the APC Web site, www.apc.com.
Este manual y la guía de seguridad están disponibles en español en el CD adjunto y en el sitio Web de APC, www.apc.com.
Ce manuel et le guide de sécurité sont disponibles en français sur le CD-ROM ci-inclus et sur le site Web d'APC, www.apc.com.
CD APC Web www.apc.com
®™ ש ÷ ΧΔ © ΑΠΧ ∏ ≤♦ ωωω.απχ.χομ≤♥ ≈ ± √ ″ © ″° ↔√÷ √ ° ± ϒ≤
CD APC www.apc.com ≤ϒ
Smart-UPS®
Uninterruptible Power Supply
Tower/Rack-Mount 2U
SURTA1500XL/1500RMXL2U/1500XLJ
SURTA2200XL/2200RMXL2U
100/120 Vac
English
Overview
The APC® by Schneider Electric Smart-UPS® SURTA1500XL/2200XL is a high performance uninterruptible power supply (UPS). It provides protection for electronic equipment from utility power blackouts, brownouts, sags, and surges; small utility fluctuations and large disturbances. The UPS also provides battery backup power until utility power returns to safe levels or the batteries are fully discharged.
Inventory
All models |
120 Vac models |
• UPS |
• PowerChute® Utility CD |
• Front bezel |
• USB communication cable |
•Serial communication cable
•Literature kit containing: –Product documentation –Smart-UPS® User Manuals CD –Safety Guide
–Warranty information
Accessories
Install accessories prior to connecting power to the UPS.
Refer to the APC Web site, www.apc.com for available accessories.
Optional accessories
•External battery pack (XLBP)
•USB communication cables
•Network Management Card (NMC)
Safety
Read the Safety Guide included in the package before installing the UPS.
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
Recycle the packaging.
2 |
SURTA 1500XL/1500XLJ/2200XL Series 100/120 Vac Tower/Rack-Mount 2U |
Product Overview
Front display panel
Load |
Battery Charge |
|
|
|
|
|
|
|
|
|
|
|
|
Test |
su0311b |
||||
|
|
|
|
|
||||
|
|
|
|
|
||||
Button or |
|
|
|
Description |
||||
Indicator |
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
The ON button: has three functions. |
|||||
|
|
|
Press this button to turn on the UPS. |
|||||
|
|
|
||||||
Test |
|
|||||||
|
Press this button to initiate a Cold Start. Cold Start is not a normal condition. When there is |
|||||||
|
|
|
||||||
|
|
|
no utility power and UPS is off, press and hold this button to restore power to UPS. UPS |
|||||
|
|
|
will emit two beeps. During second beep, release the button. |
|||||
|
|
|
Press this button to initiate a Self-Test. |
|||||
|
|
|
Automatic: The UPS performs a self-test automatically when turned on, and every two |
|||||
|
|
|
weeks there after by default. During self-test, UPS briefly operates on battery power. |
|||||
|
|
|
Manual: Press and hold ON button for a few seconds to initiate self-test. |
The Off button: This button is used to switch UPS off.
|
Bypass |
|
The Bypass LED illuminates indicating that the UPS is in bypass mode. Utility power is sent |
||
|
|
directly to connected equipment during bypass mode operation. Bypass mode operation is the |
|||
|
|
|
|
|
|
|
|
|
|
|
result of an internal UPS fault, an overload condition or a selection made through NMC or |
|
|
|
|
|
|
|
|
|
|
|
PowerChute software. |
Battery operation is not available while the UPS is in bypass mode.
Refer to “Troubleshooting” on page 10 in this manual.
On Battery |
|
The On Battery LED illuminates indicating that the UPS is supplying battery power to |
|||||||||
|
connected equipment |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On Line |
|
The On Line LED illuminates when the UPS is drawing utility power and performing double |
|||||||||
|
conversion to supply power to connected equipment. |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Overload |
|
The Overload LED illuminates indicating that the UPS is experiencing an overload condition. |
|||||||||
|
Refer to “Troubleshooting” on page 10 in this manual. |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fault |
|
The Fault LED illuminates indicating that the UPS detects an internal fault. |
||||||||
|
|
|
X |
|
Refer to “Troubleshooting” on page 10 in this manual. |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
Battery |
|
The Battery Fault illuminates indicating that one or more batteries are disconnected or must be |
|||||||||
|
replaced. |
||||||||||
Fault |
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
Refer to “Troubleshooting” on page 10 in this manual. |
SURTA 1500XL/1500XLJ/2200XL Series 100/120 Vac Tower/Rack-Mount 2U |
3 |
Front Display Panel |
Description |
Feature |
100V 120V
118.0138.2
108.7128.8
99.3119.5
90.0110.1
80.6100.8
The UPS has a diagnostic feature that indicates utility voltage.
The UPS starts a self-test as part of this procedure. The self-test does not affect voltage display.
Press and hold the ON button to view utility voltage bar graph indicator. As soon as the On Line LED starts flashing indicating a self-test is in progress, the five-LED Battery Charge indicator to the right of the display panel will show utility input voltage.
Refer to diagram for voltage reading. Values are not listed on the UPS.
Indicators on the UPS show the voltage is between the displayed value on list and the next higher value.
Refer to “Troubleshooting” on page 10 in this manual.
Rear panel
suo0523a
SERIAL COM-serial communication port for: Power management software
Interface kits
Use only interface kits supplied or approved by APC. Any other serial interface cable will be incompatible with UPS connector.
Serial and USB communication ports cannot be used simultaneously.
USB COM-USB communication port
120 Vac models: USB communication cable
100 Vac models: USB communication cables and software are available as accessories.
Contact APC at www.apc.com for purchase information.
Emergency Power Off (EPO) terminal allows the user to connect the UPS to a central EPO system.
SITE WIRING FAULT indicator-the LED illuminates when the UPS detects a building wiring fault.
TVSS GND-The UPS features a chassis ground located on the UPS rear panel for connecting the ground leads on transient voltage devices
Outlets for connecting electronic equipment.
UPS power cable for connecting to utility power.
SmartSlot for optional NMC or PowerChute accessories.
External battery pack connector. The UPS will support up to 10 XLBPs.
4 |
SURTA 1500XL/1500XLJ/2200XL Series 100/120 Vac Tower/Rack-Mount 2U |