APC AP9475 User Manual
Size:
773.37 Kb
Download

Product Information

InfraStruXure Central Front Panel

Basic model (front)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Item

 

 

 

 

 

Function

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Diagnostic

The four diagnostics indicators on the system front panel display

 

 

 

 

 

 

 

Indicators

error codes during system startup.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power-on

The power-onindicator lights when the system power is on. The

 

 

 

 

 

 

 

Indicator,

power-onindicator blinks when the system is not turned on but

 

 

 

 

 

 

 

Power Button

power is available. The power button controls the power supply

 

 

 

 

 

 

 

 

 

 

 

 

output to the system.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NMI button

The NMI button is used to troubleshoot software and device driver

 

 

 

 

 

 

 

 

 

 

 

 

errors when using certain operating systems. This button can be

 

 

 

 

 

 

 

 

 

 

 

 

pressed using the end of a paper clip. Use this button only if

 

 

 

 

 

 

 

 

 

 

 

 

directed to do so by qualified support personnel.

USB Ports (2) Used to connect USB 2.0-compliantdevices to the system.

 

HDD LED

Hard disk drive LED. When this LED is amber, the disk is being

 

 

accessed.

 

 

 

 

Monitor

VGA monitor port

 

 

 

 

System

The identification buttons on the front and back panels can be used

 

Identification

to locate a particular system within a rack. When one of these

 

Button

buttons is pushed, the blue system status indicator on the front and

 

Blue and Amber

back blinks until one of the buttons is pushed again.

 

 

 

System Status

LEDs illuminate as described below to indicate system status:

 

Indicator LEDs

 

Blue Off, Amber Off: System is turned off.

 

 

 

 

Blue Off, Amber Blinking: The system has detected an error.

 

 

Blue On, Amber Off: Power is turned on, system is operational.

 

 

Blue Blinking, Amber Off: The system identification indicator

 

 

has been activated to identify the system in a rack.

 

 

 

12

InfraStruXure Central Installation Manual

Standard model (front)

Item

Function

DVD Drive AllowsCD/DVD-basedupdates for software and firmware. (Not

available on the Basic model)

 

Diagnostic

The four diagnostics indicators on the system front panel display

 

Indicators

error codes during system startup.

 

 

 

 

Power-on

The power-onindicator lights when the system power is on. The

 

Indicator,

power-onindicator blinks when the system is not turned on but

 

Power Button

power is available. The power button controls the power supply

 

 

output to the system.

 

 

 

 

NMI button

The NMI button is used to troubleshoot software and device driver

 

 

errors when using certain operating systems. This button can be

 

 

pressed using the end of a paper clip. Use this button only if

 

 

directed to do so by qualified support personnel.

USB Ports (2) Used to connect USB 2.0-compliantdevices to the system.

 

HDD LED

Hard disk drive LED. When this LED is amber, the disk is being

 

 

accessed.

 

 

 

 

Monitor

VGA monitor port.

 

 

 

 

System

The identification buttons on the front and back panels can be used

 

Identification

to locate a particular system within a rack. When one of these

 

Button

buttons is pushed, the blue system status indicator on the front and

 

 

back blinks until one of the buttons is pushed again.

 

 

 

InfraStruXure Central Installation Manual

13

Enterprise model (front)

Item

 

Function

 

 

 

 

Power-on

The power-onindicator lights when the system power is on. The

 

Indicator,

power-onindicator blinks when the system is not turned on but

 

Power Button

power is available. The power button controls the power supply

 

 

output to the system.

 

 

 

 

NMI Button

Used to troubleshoot software and device driver errors when using

 

 

certain operating systems. This button can be pressed using the end

 

 

of a paper clip.

 

 

Use this button only if directed to do so by qualified support

 

 

personnel or by the operating system's documentation.

 

 

 

 

System

The identification buttons on the front and back panels can be used

 

Identification

to locate a particular system within a rack. When one of these

 

Button

buttons is pushed, the blue system status indicator on the front and

 

 

back blinks until one of the buttons is pushed again.

 

 

 

 

LCD Display

Provides system ID, status information, and system error

 

(Enterprise

messages. The LCD display is illuminated with a blue light during

 

only)

normal system operation. If the system needs attention due to a

 

 

problem with power supplies, fans, system temperature, or hard

 

 

drives, the LCD display will be illuminated with amber light.

 

 

Note: If the system is connected to AC power and an error has

 

 

been detected, the LCD display flashes amber regardless of

 

 

whether the system is turned on.

 

 

 

 

USB Ports (2)

Used to connect USB 2.0-compliantdevices to the system.

 

 

 

 

Monitor

VGA monitor port

 

 

 

 

DVD Drive

Allows CD/DVD-basedupdates for software and firmware. (Not

 

 

available on the Basic model.)

 

 

 

14

InfraStruXure Central Installation Manual