APC AP9218 User Manual
Size:
672.92 Kb
Download

Menu Items

Network

TCP/IP

The TCP/IP section of theNetwork menu displays settings for the

 

MasterSwitch PDU and allows you to configure the followingTCP/IP

 

settings.

 

 

 

 

 

 

 

 

 

Item

 

 

Description

 

 

 

 

 

 

System IP

 

The IP address of the MasterSwitchPDU

 

 

 

 

 

 

Subnet Mask

 

The network subnet mask

 

 

 

 

 

 

Default Gateway

The local default gateway (router address)

 

 

 

 

 

 

BOOTP

 

Enables or disables BOOTP requests forTCP/IP settings at

 

 

startup.

 

 

 

 

 

 

 

 

 

 

TFTP/FTP

For control of file transfers, the TFTP/FTP section allows access to the

 

following menu items on the TFTP/FTP menu for theTFTP andFTP

 

Client and the FTP Server.

 

 

 

 

 

 

 

Client or

 

Menu Item

Definition

 

Server

 

 

 

 

 

 

 

 

 

 

 

TFTP Client

Remote Server IP:

The network address of the TFTP server

 

used for downloads.

 

 

 

 

 

 

 

 

 

 

 

Remote Server IP:

The network address of the FTP server used

 

 

for downloads.

 

 

 

 

 

FTP Client

 

 

 

 

User Name:

The user name for access to the FTP server.

 

 

 

 

 

 

 

 

Password:

The password for access to the FTP server.

 

 

 

 

 

 

Access:

Enable or Disable FTP server access.

 

 

 

 

 

 

FTP Server

 

 

The TCP/IP port on which theFTP server for

 

 

Port:

the MasterSwitch PDU is located.

 

 

 

 

 

 

 

Default: port 21

 

 

 

 

 

 

 

 

 

Continued on next page

MasterSwitch Power Distribution Unit User’s Guide

15

Menu Items

Network continued

Telnet/Web

T.

 

 

 

 

Port

Menu Item

Definition

 

 

 

 

 

 

 

Access

Enables or Disables Telnet access.

 

 

 

 

 

 

Telnet

 

 

The TCP/IP port where the Telnet server for the

 

 

Port

 

MasterSwitch PDU resides.

 

 

 

 

 

 

 

 

Default: port 23

 

 

 

 

 

 

 

Access

Enables or Disables Web access.

 

 

 

 

 

 

Web

 

 

The TCP/IP port where the Web server for the

 

 

Port

 

MasterSwitch PDU resides.

 

 

 

 

 

 

 

 

Default: port 80

 

 

 

 

 

SNMP

The SNMP section of theNetwork menu displays the followingSNMP

 

settings:

 

 

 

 

 

 

 

 

 

Item

 

 

Definition

 

 

 

 

SNMP Access

Enables or disables SNMP access.

 

 

 

 

Access Control

Controls access to each of the four SNMP channels.

 

 

 

 

 

Trap Receiver

Defines up to four network management stations (NMSs) to

 

which traps are sent.

 

 

 

 

 

 

 

 

 

 

 

 

Continued on next page

MasterSwitch Power Distribution Unit User’s Guide

16

Menu Items

Network continued

SNMP, continued Access control. TheAccess Control section of theSNMP menu identifies the current settings for all fourSNMP channels and provides the configurable values for a selected channel.

Item

Definition

 

 

 

The password that the NMS (identified by theNMS IP option)

Community Name

must use for SNMP access to the MasterSwitchPDU. The

allowed access type is defined by the Access Type option.

 

Maximum: 15 characters.

 

 

 

Limits access to the NMS orNMSs specified. You specify the

 

value as a specific IP address for oneNMS or as anIP address

 

filter for multiple IP addresses. For example:

 

159.215.12.1 allows only theNMS with the specificIP address

 

of 159.215.12.1 to have access.

NMS IP

159.215.12.255 allows access for anyNMS on the159.215.12

segment.

 

 

159.215.255.255 allows access for anyNMS on the159.215

 

segment.

 

159.255.255.255 allows access for anyNMS on the 159

 

segment.

 

0.0.0.0 or255.255.255.255 allows access for anyNMS.

 

 

 

Defines what actions the NMS that is identified by theNMS IP

 

option can perform:

Access Type

• Write: The NMS can useGETs andSETs.

 

• Read: The NMS can use onlyGETs.

 

• Disabled: The NMS can use neitherGETs norSETs.

 

 

Trap Receiver. TheTrap Receiver section of theSNMP menu identifies the current settings for all four trap receivers and allows you to change the values for a selected trap receiver.

Item

Definition

 

 

 

The password that the MasterSwitch PDU uses when it

Community Name

sends traps to the NMS identified by the ReceiverNMS IP

option.

 

Maximum: 15 characters.

 

 

 

The IP address of the NMS that will receive traps sent by

Receiver NMS IP

the MasterSwitch PDU.

Note: To send no traps to anyNMS, set 0.0.0.0 as the

 

 

Trap Receiver IP.

 

 

 

Enables or Disables the ability of the MasterSwitch PDU

Trap Generation

to send traps to the NMS identified by theReceiver NMS

 

IP option.

 

 

 

Enables or Disables the ability of the MasterSwitch PDU

Authentication Traps

to send authentication traps to the NMS identified by the

 

Receiver NMS IP option.

 

 

MasterSwitch Power Distribution Unit User’s Guide

17