APC AP9218 User Manual
Size:
672.92 Kb
Download

Event-Related Menus and Options

Management Card and MasterSwitch Events

Event generation The Management Card and MasterSwitch both generate events, which are logged in the event log.

Any event of either type generates a unique code, which you can use in applications to identify the event.

To use SNMP traps for event notifications, you must first identify the trap receivers (up to four) by their specific IP addresses. See Trap receivers on page 30.

Severity levels defined

Severity

Definition

Requires immediate action. Severe events can cause incorrect Severe operation of the DC Power Plant or its supported equipment or can

cause loss of power protection during a power failure.

Warning

Needs action if the condition worsens, but does not require immediate attention.

Informational

Requires no action.

Note: All MasterSwitch events and some Management Card events have a severity level.

For information about how severity levels define the actions associated with events, see Actions Option (Web Interface only) on page 29.

Continued on next page

MasterSwitch Power Distribution Unit User’s Guide

36

Event-Related Menus and Options

Management Card and MasterSwitch Events continued

Management card events

Code

Severity

Description

 

 

 

0x0001

Severe

System: Coldstart. (The Management Card was turned on.)

 

 

 

0x0002

Severe

System: Warmstart. (The Management Card was reset after

it was already turned on.)

 

 

 

 

 

0x0003

Warning

System: SNMP configuration change.

 

 

 

0x0004

Informational

System: An unauthorized user attempted to access the

SNMP interface.

 

 

 

 

 

0x0005

Warning

System: An unauthorized user attempted to access the

control console interface.

 

 

 

 

 

0x0006

Warning

System: An unauthorized user attempted to access the Web

interface.

 

 

 

 

 

0x0008

Warning

System: Password changed.

 

 

 

0x000C

No severity

System: File transfer started. (FTP)

 

 

 

0x000D

No severity

System: File transfer started. (TFTP)

 

 

 

0x000F

No severity

System: File transfer failed.

 

 

 

0x0014

No severity

System: Control console user logged on.

 

 

 

0x0015

No severity

System: Web user logged on.

 

 

 

0x0016

No severity

System: FTP user logged on.

 

 

 

0x0018

No severity

System: Reset to Defaults.

 

 

 

0x0019

No severity

System: Initializing data.

 

 

 

Note: You cannot configure actions for Management Card events that have no severity level.

Continued on next page

MasterSwitch Power Distribution Unit User’s Guide

37

Event-Related Menus and Options

Management Card and MasterSwitch Events continued

MasterSwitch

events

Code

Severity

Description

 

 

 

 

 

0x0501

Warning

An outlet has rebooted. If the outlet number is 0, then all

 

outlets have rebooted.

 

 

 

 

 

 

 

 

0x0509

Warning

An outlet has turned on. If the outlet number is 0, then all

 

outlets have turned on.

 

 

 

 

 

 

 

 

0x050B

Warning

An outlet has turned off. If the outlet number is 0, then all

 

outlets have turned off.

 

 

 

 

 

 

 

 

0x0510

Warning

An outlet has changed configuration. If the outlet number is

 

0, then the Master outlet has changed.

 

 

 

 

 

 

 

 

0x0901

Informational

Add user.

 

 

 

 

 

0x0902

Informational

Delete user.

 

 

 

 

 

0x0903

Informational

Edit user.

 

 

 

 

MasterSwitch Power Distribution Unit User’s Guide

38