APC 990-1387A User Manual

Size:
467.4 Kb
Download

User Manual

Language Addendum English

The User Manual is accessible from the supplied CD and the APC web site, www.apc.com.

Supplément multilingue

du guide d’utilisation Français

Le Guide d’utilisation est disponible dans d’autres langues sur le CD fourni, de même qu’au site Web de APC, www.apc.com.

Installationshandbuch-

Sprachenanhang Deutsch

Das Installationshandbuch ist auf der beiliegenden CD und der APC Web-Seite,www.apc.com, in weiteren Sprachen verfügbar.

Anexo al Manual del Usuario en español Español

El Manual del Usuario ha sido publicado también en otros idiomas que pueden consultarse tanto en el disco entregado como en el sitio de APC en Internet: www.apc.com.

Adendo Multilíngüe do Manual do Usuário Português

O Manual do Usuário encontra-sedisponível em outras línguas no CD fornecido com o produto ou no website da APC:www.apc.com.

Supplemento linguistico

al Manuale dell’utente Italiano

Questo Manuale dell’utente è disponibile in diverse lingue sul CD-ROMfornito e sul sito Web APCwww.apc.com.

Jazykový doplněk Uživatelské příručky Česky

Uživatelská příručka je k dispozici v dalších jazycích na dodávaném CD a na internetové stránce APC na adrese www.apc.com

Felhasználói kézikönyv nyelvi kiegészítés Magyar

A felhasználói kézikönyv más nyelveken is megtalálható a mellékelt CD-nés az APC honlapján:www.apc.com.

Informacja dotycząca wersji językowych instrukcji obsługi Polski

Instrukcja obsługi jest dostępna w innych językach na dostarczonym dysku kompaktowym oraz w witrynie internetowej firmy APC pod adresem www.apc.com.

Дополнение: руководство по эксплуатации на других языках На русском языке

Руководство по эксплуатации на других языках записано на поставляемом компакт-диске;кроме того, его можно загрузить сweb-сайтакомпании APC,www.apc.com.

Bahasa Tambahan Petunjuk

Pemakai Bahasa Indonesia

Petunjuk Pemakai tersedia dalam berbagai bahasa, dalam CD yang disediakan dan website APC, www.apc.com.

APC www.apc.com.

990-1387A09/2003

User Manual

English

SURT192XLBP External Battery Pack

For Use With Smart-UPS® RT 3000/5000/7500/10000 VA

Uninterruptible Power Supply

990-1387A09/2003

Introduction

The SURT192XLBP connects to the APC Smart-UPS® RT 3000/5000/7500/10000 VA. Together these units provide extended protection from blackouts, brownouts, sags, and surges for your computer and other critical electronic equipment.

1: INSTALLATION

Refer to the Safety Instruction sheet included with the UPS before installing the batteries.

Unpacking

Inspect the unit upon receipt. Notify the carrier and dealer if there is damage. The packaging is recyclable; save it for reuse or dispose of it properly. Check the package contents:

the external battery pack the front bezel

three tie brackets and six screws

product documentation, Safety Guide, warranty information

Placement of the External Battery Pack

Place the external battery pack where it will be used.

The unit is heavy. Select a location sturdy enough to handle the weight.

Do not operate this unit where there is excessive dust or the temperature and humidity are outside the specified limits. Refer to the APC web site, www.apc.com for details.

Ensure the air vents on the front and rear of the unit are not blocked.

PLACEMENT

1

Installing the External Battery Pack(s)

Your UPS model may vary from the model depicted in the diagram. The battery installation procedure is identical for all models.

Prior to connecting the batteries, and tie brackets (when used), remove the feet (if installed), from the bottom of the UPS. See diagram.

x4

x4

REMOVINGBATTERIES FROM THEEXTERNALBATTERYPACK

This unit is heavy. To lighten the unit, remove the batteries. Refer to the unpacking instructions on the carton the unit is shipped in or see instructions below.

1

2

3

 

 

1

 

x9

2

 

 

3

 

 

4

TOWERCONFIGURATION

Installing and Connecting the External Battery Pack(s)

NOTE: The external battery packs must be installed to the right of the UPS when facing thefront of the units, (see diagrams below).

1. Remove the screws that secure the top covers.

2. Install the tie bracket securing the UPS and external battery pack (screws included).

2

3.Install the rear tie brackets (screws included), as shown in the diagrams below.

UPS and One External Battery Pack

UPS and Two External Battery Packs

Note: Tie brackets on

the center XLBP share Secure tie a common screw. brackets

4.Connect the green/yellow ground wires (screws included), as shown in the diagrams below.

TVSS Ground Wire Connections

5.Connect the rear panel batteries as shown in the diagrams below.

Rear Battery Connections

6.Replace the top covers and secure with the screws removed in step 1.

3

Installing and Connecting the Front Batteries and Attaching the Bezel

1

2

4

3

2

1

3

4

x9

5

6

4

RACKMOUNTCONFIGURATION

Refer to the Installation Guide included in Rail Kit SURTRK2 for instructions on mounting the UPS and the external battery packs into a rack.

NOTE: The external battery packs must be mounted below the UPS in the rack.

Installing and Connecting the External Battery Pack(s)

1.Connect the green/yellow ground wires (screws included), as shown in the diagrams below.

TVSS Ground Wire Connections

2.Connect the rear panel batteries as shown in the diagrams below.

Battery Connections

5

Installing and Connecting the Front Batteries and Attaching the Bezel

1

2

1

2

3

4

3

4

x9

5

6

6