AOpen AK79GMAX User Manual
Size:
3.82 Mb
Download

AK79G MAX/AK79D MAX

OOnnlliinneeMMaannuuaall

Troubleshooting

If you encounter any trouble to boot you system, follow the procedures accordingly to resolve the problem.

Start

Turn off the power and unplug the AC power cable, then remove all of the add-oncards and cables, including VGA, IDE, FDD, COM1, COM2 and printer.

Make sure if all jumper settings are correct.

Clear CMOS

Next

108

AK79G MAX/AK79D MAX

OOnnlliinneeMMaannuuaall

Continue

Install the VGA card. Then connect your monitor and keyboard.

Yes

Next

Turn on the power

 

and check if the power

No

supply and CPU fan work

 

properly.

 

The problem is probably caused by power supply or motherboard failure. Please contact your reseller or local distributor for repairing.

109

AK79G MAX/AK79D MAX

OOnnlliinneeMMaannuuaall

Continue

No

Check if there is display?

Yes

Press <Ctrl> and <Alt> key at the same time, hold them and then press <Del> to reboot the system.

No

Check if the system reboots?

Yes

Next

Perhaps your VGA card or monitor is defective.

It is very possible that your keyboard is defective.

110

AK79G MAX/AK79D MAX

OOnnlliinneeMMaannuuaall

Continue

During system rebooting, press <Del> to enter BIOS setup. Choose “Load Setup Default”.

Turn off the system and re-connectIDE cable.

No

Check if the system can reboot successfully?

Yes

Re-installthe operating system such as Windows 98.

End

The problem should be caused by the IDE cable or HDD itself.

111