Commercial Gas Water Heaters
96% THERMAL EFFICIENCY VERSATILE POWER DIRECT-VENT
The Cyclone Xi™ is a light-duty, power direct-vent, fully condensing commercial gas water heater with an internal helical heat exchanger. This helical heat exchanger helps Cyclone Xi achieve 96% thermal efficiency and deliver outstanding hot water output.
HELICAL INTERNAL HEAT EXCHANGER
nCompletely surrounded by water in tank, provides much greater heat transfer surface than standard straight flue tube
nProduces 96% thermal efficiency, which saves money on operating costs, increases hot water output compared to standard-efficiency water heaters
nMinimizes standby losses by trapping heat in the tank
VERSATILE POWER DIRECT-VENT DESIGN
nPower Direct-Vent System allows up to 120 feet using PVC, CPVC, or ABS pipe. Can be vented vertically thru-the-roof or horizontally thru-the-wall
n2” pipe, vents up to 20 equivalent feet
n3” pipe, vents up to 60 equivalent feet
n4” pipe, vents up to 120 equivalent feet
nOptional concentric vent kit available
CONDENSING DESIGN
n96% efficient condensing deign
nEquipped with condensate drain tee
HIGH OUPUT WITH SMALL FOOTPRINT
n22” diameter, combined with 96% efficiency, 50-gallon tank and 100,000 BTU input means Cyclone Xi can be installed in less space than a larger 75-gallon unit, with equal or better performance
nTotal height is 68-1/2” to top of unit
SIDE-MOUNTED HOT AND COLD RECIRCULATING TAPS
nAllows Cyclone Xi to be installed as part of combination space heating/water heating applications, or any system requiring a recirculating hot water loop
nPlugs for the recirculating taps are factory installed
ADVANCED ELECTRONIC CONTROL
nLarge LCD display
nPrecise temperature control
nAdvanced diagnostics
PERMAGLAS® ULTRA COAT™ GLASS LINING
nA. O. Smith exclusive process provides superior protection against corrosion
nProtects all interior tank surfaces including inside and outside of helical heat exchanger
TWO HEAVY-DUTY ANODE RODS
n Provides advanced protection against corrosion
AVAILABLE IN NATURAL GAS AND PROPANE
TOP FIRED LOW-NOX GREEN CHOICE® GAS BURNER
n“Eco-friendly” design reduces NOx emissions
and complies with Southern California and Texas requirements
FACTORY-INSTALLED TEMPERATURE AND PRESSURE RELIEF VALVE MAXIMUM HYDROSTATIC WORKING PRESSURE: 150 PSI
CODES AND STANDARDS
nDesign-certified by UL (Underwriters Laboratories) according to
ANSI Z21.10.3-CSA4.3 standards governing storage-type water heaters
nThese models meet or exceed the thermal efficiency and standby loss requirements of ASHRAE 90.1 (current standard)
BTX-100
GAS-FIRED GAS-FIRED
|
Page 1 of 2 |
April 2008 |
AOSCG10101 |