AMX DESIGN XPRESS-PROFESSIONAL V 1.1 Programmer Guide

0 (0)
AMX DESIGN XPRESS-PROFESSIONAL V 1.1 Programmer Guide

instruction manual

Design XPress - Professional

version 1.1

Programmer’s Guide

Software

Software License and Warranty Agreement

LICENSE GRANT.

AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, not sold. The AMX Software consists of generally available programming and development software, product documentation, sample applications, tools and utilities, and miscellaneous technical information. Please refer to the README.TXT file on the compact disc or download for further information regarding the components of the AMX Software. The AMX Software is subject to restrictions on distribution described in this License Agreement. YOU MAY NOT LICENSE, RENT, OR LEASE THE AMX SOFTWARE. You may not reverse engineer, decompile, or disassemble the AMX Software.

INTELLECTUAL PROPERTY.

The AMX Software is owned by AMX and is protected by United States copyright laws, patent laws, international treaty provisions, and/or state of Texas trade secret laws. Licensee may make copies of the AMX Software solely for backup or archival purposes. Licensee may not copy the written materials accompanying the AMX Software.

TERMINATION. AMX RESERVES THE RIGHT, IN ITS SOLE DISCRETION, TO TERMINATE THIS LICENSE FOR ANY REASON AND UPON WRITTEN NOTICE TO LICENSEE.

In the event that AMX terminates this License, the Licensee shall return or destroy all originals and copies of the AMX Software to AMX and certify in writing that all originals and copies have been returned or destroyed.

PRE-RELEASE CODE.

Portions of the AMX Software may, from time to time, as identified in the AMX Software, include PRE-RELEASE CODE and such code may not be at the level of performance, compatibility and functionality of the final code. The PRE-RELEASE CODE may not operate correctly and may be substantially modified prior to final release or certain features may not be generally released. AMX is not obligated to make or support any PRE-RELEASE CODE. ALL PRE-RELEASE CODE IS PROVIDED "AS IS" WITH NO WARRANTIES.

LIMITED WARRANTY.

AMX warrants that the AMX Software will perform substantially in accordance with the accompanying written materials for a period of ninety (90) days from the date of receipt. AMX DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE AMX SOFTWARE. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. Any supplements or updates to the AMX SOFTWARE, including without limitation, any (if any) service packs or hot fixes provided to you after the expiration of the ninety (90) day Limited Warranty period are not covered by any warranty or condition, express, implied or statutory.

LICENSEE REMEDIES.

AMX's entire liability and your exclusive remedy shall be repair or replacement of the AMX Software that does not meet AMX's Limited Warranty and which is returned to AMX. This Limited Warranty is void if failure of the AMX Software has resulted from accident, abuse, or misapplication. Any replacement AMX Software will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. Outside the United States, these remedies may not available.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL AMX BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS AMX SOFTWARE, EVEN IF AMX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES/COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

U.S. GOVERNMENT RESTRICTED RIGHTS. The AMX Software is provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of The Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c)(1) and (2) of the Commercial Computer Software Restricted Rights at 48 CFR 52.227-19, as applicable.

This Agreement replaces and supercedes all previous AMX Software License Agreements and is governed by the laws of the State of Texas, and all disputes will be resolved in the courts in Collin County, Texas, USA. Should you have any questions concerning this Agreement, or if you desire to contact AMX for any reason, please write: AMX

Corporation, 3000 Research Drive, Richardson, TX 75082.

 

Table of Contents

Table of Contents

 

Introduction ...............................................................................................................

1

New Features available within version 1.1 ........................................................................

1

Supported Operating Systems ..........................................................................................

4

Minimum System Hardware Requirements.......................................................................

4

Minimum System Software Requirements ........................................................................

4

Downloading the Application .............................................................................................

4

Supported Touch Panels...................................................................................................

5

G4 Touch Panels ................................................................................................................

..... 5

G3 Touch Panels ................................................................................................................

..... 5

G3 Touch Panel Considerations ..............................................................................................

5

Supported Subsystems and Equipment ............................................................................

6

Audio/Video Switchers ........................................................................................................

... 6

Audio Conferencing Devices ..................................................................................................

7

AMX NetLinx Integrated Controllers ........................................................................................

7

Cameras .....................................................................................................................

........... 7

CD (Compact Disc) Players ..................................................................................................

7

DVD (Digital Video Disc) Players ..........................................................................................

7

Lighting .....................................................................................................................

.............. 8

MAX - Integrated Content Servers by AMX .............................................................................

8

MP3 Players....................................................................................................................

......... 9

Plasma Displays ..............................................................................................................

....... 9

Serial-Interface Devices .......................................................................................................

.... 9

User Interfaces................................................................................................................

......... 9

Video Cassette Recorder (VCR) ............................................................................................

9

Video Conferencing Devices ................................................................................................

10

Video Projection Devices .....................................................................................................

10

User Information Splash-screen......................................................................................

11

DXP-PRO Main Screen...................................................................................................

11

Project Selection List.........................................................................................................

..... 12

Project Selection List Context Menu ......................................................................................

13

Main Screen Command Buttons ............................................................................................

13

Copy Project dialog ............................................................................................................

.... 14

Version Information ............................................................................................................

.... 14

DXP-PRO v1.1 - Programmer’s Guide

i

 

 

 

 

Table of Contents

 

DXP-PRO Menu Bar .......................................................................................................

14

File Menu ...............................................................................................................................

14

Edit Menu ...............................................................................................................................

15

View Menu .............................................................................................................................

15

Help Menu..............................................................................................................................

15

Before You Begin ............................................................................................................

16

Configuring your Program Preferences..................................................................................

16

Getting Started with the Sample Project ................................................................................

17

Using the DXP-PRO Wizard ...................................................................................

19

Required Information for Building a System....................................................................

19

Common Mistakes ..........................................................................................................

19

Launching the DXP-PRO Project Wizard........................................................................

20

Project Wizard Navigation Controls ................................................................................

21

System Information Dialog ..............................................................................................

22

Adding a Device to the Project...............................................................................................

24

Adding IR-Controlled Devices to the Project..........................................................................

24

Adding Serial-Controlled Devices to the Project ....................................................................

25

Adding Ethernet-Controlled Devices to the Project................................................................

27

Adding a MAX-IMS or MMS Server to the Project .................................................................

28

Working with MAX Servers ....................................................................................................

28

Duplicating a Device ..............................................................................................................

29

Device Configuration Dialog............................................................................................

29

Device Configuration dialog - Device Data tab .....................................................................

30

How to setup external cameras (using Camera and Video Conference source types)..........

33

How to configure G4 Computer Control (G4CC)....................................................................

34

How to configure i!-Weather...................................................................................................

35

Device Configuration dialog - IR Mapping tab........................................................................

36

Mapping a Function................................................................................................................

36

Removing a Mapped Function ...............................................................................................

37

Device Configuration dialog - Control Configuration tab ........................................................

37

Device Configuration dialog - Power Control tab ...................................................................

39

Device Considerations when using New Features..........................................................

40

Which Screens? Dialog...................................................................................................

41

Integrated Applications Dialog ........................................................................................

42

Lighting Presets Dialog ...................................................................................................

44

Note for ALD-D48 Lighting Systems ......................................................................................

45

Note for Radia Lighting Systems............................................................................................

46

 

ii

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

 

 

Table of Contents

Touch Panel Interfaces Dialog ........................................................................................

46

Choose Touch Panel Theme Dialog ...............................................................................

49

Choose Touch Panel Background dialog...............................................................................

50

Choose Touch Panel Buttons dialog......................................................................................

50

Choose Touch Panel Text Colors dialog................................................................................

51

Input Names dialog .........................................................................................................

 

51

Switcher Inputs/Outputs Dialog .......................................................................................

52

Switcher Inputs tab............................................................................................................

 

..... 52

Switcher Outputs tab...........................................................................................................

 

... 54

Channel Preset Categories Dialog ..................................................................................

55

Channel Presets for...Dialogs..........................................................................................

 

56

CD Titles for CD Dialog ...................................................................................................

 

57

Adding a new CD title:.........................................................................................................

 

... 57

Editing CD Information .........................................................................................................

 

.. 58

Retrieving CD Information (from freedb.org)..........................................................................

58

Removing a CD Title ............................................................................................................

 

.. 58

Using the CD Titles Maintenance dialog ................................................................................

58

Adding a new Disc title (CD Titles Maintenance dialog) ........................................................

58

Editing Disc Information (CD Titles Maintenance dialog).......................................................

58

Retrieving CD Information from freedb.org (CD Titles Maintenance dialog)..........................

58

Removing a CD Title (CD Titles Maintenance dialog)............................................................

59

DVD Titles for DVD Dialog ..............................................................................................

 

59

Relay Control Dialog .......................................................................................................

 

59

Adding a Relay Control Definition to the list...........................................................................

61

Editing the Display Name for an existing Relay Control Definition.........................................

61

Deleting a Relay Control Definition from the list.....................................................................

61

Navigation and Routing Macros Dialog ...........................................................................

61

Editing an existing Macro within the Project...........................................................................

62

Using the Macro Steps for....

dialog to edit the macro steps...................................................

63

System Macros Dialog ....................................................................................................

 

65

Adding a New System Macro to the Project...........................................................................

66

Using the Macro Steps for...

dialog for System Macros .........................................................

66

Editing Your Project.........................................................................................................

 

66

Creating an Existing Design XPress - Professional Project ...................................................

66

Opening an Existing Design XPress - Professional Project ...................................................

67

Copying a Design XPress - Professional Project ...................................................................

67

Importing a DXP-PRO Project................................................................................................

67

Exporting a DXP-PRO Project ...............................................................................................

68

Deleting a DXP-PRO Project .................................................................................................

68

Before you’re Finished ....................................................................................................

 

68

DXP-PRO v1.1 - Programmer’s Guide

iii

 

 

 

 

Table of Contents

 

Finishing a Project...........................................................................................................

69

Understanding the Report File ...............................................................................................

70

Uploading a completed touch panel file to a target panel ......................................................

71

Working with your Project ...............................................................................................

73

The NetLinx Studio Project .............................................................................................

74

Transferring CD/DVD Title Information to the Master via FTP........................................

74

DXP-PRO Touch Panel Channel Maps .................................................................

77

_keyboardVirtual .................................................................................................................

77

Cable Menu ..........................................................................................................................

79

Cable Tuner ..........................................................................................................................

79

Cable Video ...........................................................................................................................

79

Camera .................................................................................................................................

80

CD Changer ...........................................................................................................................

80

CD Changer Advanced ..........................................................................................................

80

CD List ...................................................................................................................................

81

CD List - Title Only .................................................................................................................

81

CD List Action Picker .............................................................................................................

82

CD List Keyboard ...................................................................................................................

82

Channel Preset Categories ....................................................................................................

82

Channel Presets.....................................................................................................................

82

ClearOne Incoming ................................................................................................................

83

ClearOne Info.........................................................................................................................

83

ClearOne Main .......................................................................................................................

83

ClearOne Presets...................................................................................................................

84

ClearOne TH2 Main ...............................................................................................................

84

ClearOne TH2 Speed Dial .....................................................................................................

85

Conference Volume ...............................................................................................................

85

Controls ................................................................................................................................

85

Debug.....................................................................................................................................

86

Display ...................................................................................................................................

86

Display Advanced ..................................................................................................................

86

Display Inputs.........................................................................................................................

87

Display Video .........................................................................................................................

87

DSS Menu..............................................................................................................................

88

DSS Tuner .............................................................................................................................

88

DSS Video..............................................................................................................................

88

DVD........................................................................................................................................

89

DVD Changer Advanced........................................................................................................

89

DVD Menu..............................................................................................................................

90

DVD Video .............................................................................................................................

90

 

iv

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

 

Table of Contents

G4CC .........................................................................................................................

.......... 90

HELP-ABOUT .....................................................................................................................

... 90

KBKeyboard ....................................................................................................................

...... 90

KBShift .......................................................................................................................

........... 91

Lights......................................................................................................................................

91

Logo ...........................................................................................................................

............ 91

Macros .........................................................................................................................

.......... 91

Macros2 ........................................................................................................................

......... 92

Main Page ....................................................................................................................

........ 92

Main Page - Static.............................................................................................................

..... 92

MAX Audio ......................................................................................................................

....... 93

MAX CD Warning.................................................................................................................

.. 93

MAX DVD Warning ..............................................................................................................

93

MAX Genre ......................................................................................................................

...... 93

MAX Media Search ...............................................................................................................

. 93

MAX Movie Search ...............................................................................................................

. 94

MAX Playlist ...................................................................................................................

........ 94

MAX Record CD..................................................................................................................

... 95

MAX Record DVD .................................................................................................................

. 95

MAX TrackList..................................................................................................................

...... 95

MAX Video ......................................................................................................................

....... 96

MAX Video Transport............................................................................................................

. 96

Meeting Keyboard .............................................................................................................

... 96

MessageBox .....................................................................................................................

..... 96

MM - Sources...................................................................................................................

...... 97

MM - Sources2 ................................................................................................................

..... 97

MP3 Navigator ..................................................................................................................

..... 97

MP3 Player ..................................................................................................................

........ 98

mtgmAppointmentDetails .....................................................................................................

99

mtgmHelpQuestion .............................................................................................................

. 99

mtgmHelpMessage ..............................................................................................................

99

mtgmHelpResponse .............................................................................................................

99

mtgmMaintenanceMessage .................................................................................................

99

mtgmMeetingEndWarning ....................................................................................................

99

mtgmMeetingExtendWarning ...............................................................................................

99

mtgmMonthSelect ..............................................................................................................

100

mtgmMtgControl ...............................................................................................................

.. 100

mtgmViewSchedule ............................................................................................................

100

mtgmYearSelect ...............................................................................................................

.. 103

mtgmViewSchedule1 .......................................................................................................

103

DXP-PRO v1.1 - Programmer’s Guide

v

 

 

 

 

Table of Contents

 

mtgmViewSchedule3 .......................................................................................................

104

Polycom Bandwidth ............................................................................................................

104

Polycom Call Control ..........................................................................................................

104

Polycom Call Status ...........................................................................................................

104

Polycom Camera ................................................................................................................

105

Polycom Clear Bandwidth .................................................................................................

105

Polycom Clear Hangup ......................................................................................................

105

Polycom Directory ..............................................................................................................

106

Polycom Hangup ................................................................................................................

106

Polycom Keyboard .............................................................................................................

106

Polycom Keypad ................................................................................................................

106

Polycom Main .....................................................................................................................

106

Polycom Message ..............................................................................................................

107

Polycom Navigate ..............................................................................................................

107

Polycom Video Select .........................................................................................................

107

Projector Video ...................................................................................................................

107

PVR......................................................................................................................................

108

PVR Menu............................................................................................................................

108

PVR Tuner ...........................................................................................................................

108

PVR Video............................................................................................................................

109

Relays ..................................................................................................................................

109

Select ...................................................................................................................................

109

Splash ..................................................................................................................................

109

Switcher ...........................................................................................................................

110

Tandberg Answer ..............................................................................................................

111

Tandberg Call Status ........................................................................................................

111

Tandberg Camera ..............................................................................................................

111

Tandberg Directory ............................................................................................................

112

Tandberg DirSetup .............................................................................................................

113

Tandberg DirSetupCAPS ....................................................................................................

113

Tandberg DirSetup 1 ..........................................................................................................

113

Tandberg Duo Source ........................................................................................................

114

Tandberg Far End ..............................................................................................................

114

Tandberg Hangup ..............................................................................................................

115

Tandberg Keyboard ...........................................................................................................

115

Tandberg Keyboard CAPS .................................................................................................

115

Tandberg Main ...................................................................................................................

115

Tandberg Manual Dial ........................................................................................................

116

Tandberg Msgboard ............................................................................................................

116

Tandberg Password ...........................................................................................................

116

 

vi

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

 

Table of Contents

TNadvancedControls .........................................................................................................

116

TNcanvas .....................................................................................................................

...... 117

TNcolor picker ...............................................................................................................

..... 117

TNkeypad .....................................................................................................................

...... 118

TNpenOptions .................................................................................................................

... 118

TNshape ......................................................................................................................

....... 118

TNtext .......................................................................................................................

.......... 119

VCR............................................................................................................................

.......... 119

VCR Menu.......................................................................................................................

..... 119

VCR Tuner ......................................................................................................................

..... 120

VCR Video ......................................................................................................................

..... 120

Video .........................................................................................................................

.......... 120

Volume .........................................................................................................................

........ 120

Vortex Codec ..................................................................................................................

.... 121

Vortex Gain ...................................................................................................................

...... 122

Vortex Incoming ..............................................................................................................

... 122

Vortex Mute ..................................................................................................................

...... 122

Vortex Presets ...............................................................................................................

..... 123

Weather ......................................................................................................................

........ 124

WeatherBrowse ................................................................................................................

.. 125

WeatherConfig ................................................................................................................

... 125

WeatherDownload ..............................................................................................................

125

Touch Panel Buttons using Strings ....................................................................

127

String Output - CD List Keyboard ....................................................................................

127

String Output - KBKeyboard ...........................................................................................

128

String Output - KBShift ......................................................................................................

. 129

String Output - MAX Keyboard .......................................................................................

130

String Output - MAX Keyboard Shift ..............................................................................

131

String Output - Meeting Keyboard ..................................................................................

132

String Output - MP3 Keyboard ........................................................................................

133

String Output - Polycom Keyboard ..................................................................................

134

String Output - Polycom Keypad .....................................................................................

135

String Output - Tandberg Answer ...................................................................................

136

String Output - Tandberg Camera .....................................................................................

136

String Output - Tandberg Codec .......................................................................................

136

String Output - Tandberg Directory ...................................................................................

136

String Output - Tandberg DirSetup .................................................................................

136

String Output - Tandberg DirSetupCAPS .....................................................................

... 137

String Output - Tandberg DirSetup 1 ..............................................................................

138

String Output - Tandberg Far End .....................................................................................

138

DXP-PRO v1.1 - Programmer’s Guide

vii

 

 

 

 

Table of Contents

 

String Output - Tandberg Keyboard ................................................................................

138

String Output - Tandberg Keyboard CAPS .....................................................................

139

String Output - Tandberg Manual Dial ............................................................................

140

String Output - WeatherZipCode .........................................................................................

141

 

viii

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Introduction

Introduction

Design XPress - Professional (DXP-PRO)™ is a software package developed to assist AMX dealers in quickly designing, installing, and programming a control system. The type of control system created using DXP-PRO allows the selection and control of audio/video sources, audio/video switchers, display devices, room lighting, and audio/video conference equipment (among other functions).

DXP-PRO allows control from AMX's CV6 (6" wired touch panel), CA10, CV10 (10.4" wired touch panels), as well as the entire line of Modero (G4) touch panels (refer to the Supported Touch Panels section on page 5). A wizard-based graphic user interface (GUI) helps a dealer quickly step through the process of entering information specific to the system being created.

The DXP-PRO Project Wizard also allows you to specify the type of NetLinx Master Controller used to control the system. DXP-PRO supports NetLinx Integrated Controllers such as: NI-700, NI-2000, NI-3000, NI-4000, and the NXI equipped with an NXC-ME260/64 Master card. The wizard only allows you to choose a NetLinx Master that is able to accommodate the devices and functions specified within your project.

Once the steps outlined in the wizard are completed, it automatically generates all NetLinx program files, touch panel files, and a comprehensive report file for the system. While these auto-generated program files can be used as-is, they can also be modified using NetLinx Studio™ and TPDesign4. These applications allow you to customize the NetLinx code and touch panel files to accommodate specific client desires as well as those unique requirements always found in custom installations.

You can have multiple instances of DXP-PRO generated projects open in NetLinx

Studio at any time.

This manual will take you through the steps required to generate a system using the DXP-PRO wizard.

New Features available within version 1.1

Enhanced Automation

This new feature is added as a selectable option within the Touch Panel Interfaces dialog page. Enhanced Automation allows you to exclude specific buttons from the Navigation menu, such as Display, Lights, Macros, and Relay buttons. It also allows you to customize the DXP-PRO generated touch panel file information by copying buttons from the underlying pages and providing that functionality onto the current page.

De-selecting these (Display, Lights, Macros, and Relay) radio boxes specifies which buttons will be excluded from the output touch panel pages (within the project file) for the chosen touch panel.

DXP-PRO v1.1 - Programmer’s Guide

1

 

 

 

 

Introduction

Support for NI-700 NetLinx Integrated Controller

This new controller is treated the same as any of the other NI Series of Integrated Controllers. If the project calls for more ports than the NI-700 can provide (2 Serial and 1 IR), it is not selectable as a system controller via the DXP-PRO wizard.

Support for Cameras

This new far-end control of external cameras (using Serial control ports) is possible by supporting them as a Source type (external to a video conferencing unit) using a remote serial interface operating on a selected port. Their selection is added as a choice from a drop-down selection list within the Camera Control section of the Device Data tab. These cameras must first be added as a Source type within the same Device Data tab of the

Device Configuration dialog page before they can be used by other sources such as a video display. This feature is only supported within G4 touch panels.

Support of remote serial interface usage (Display devices and External cameras)

This new support is added as way of providing far-end control of external cameras and display devices using Serial control ports. This is accomplished by allowing you to choose either Camera or Display as a selectable Source Types within the Device Data tab of the Device Configuration dialog page. This feature allows you to extend their "reach" and control an external camera directly by parsing out Send Commands to the external Serial control ports. Local control of cameras is done indirectly via the use of AXB-PT15 camera controllers.

If either a Camera or Video Display (such as a Projector/Plasma and TV) are chosen to be controlled via Serial (RS-232), two new fields become available within the Device Data section. Place a checkmark in the Use remote serial interface field to indicate you are using an external serial interface or leave it unchecked to use a Serial port on the Master.

If this option is checked, you can choose which port on the serial interface to use by choosing a port from the drop-down list. This was implemented to communicate to some cameras and display devices that are not located near the Master.

Support for MeetingManger

This new support is added as a selectable option within the Integrated Applications dialog page. Enabling this option, provides the ability to enable touch panel pages to support the on-screen display of room scheduling and appointments. All queriable devices within the target environment such as: source/display/switching devices, and AMX devices (touch panels and NXA-UPSs) can be monitored via the MeetingManager application.

No scheduling capabilities are available through the DXP-PRO touch panels and must be done through the actual RMS (Resource Manager Suite) application interface.

To enable online/offline notification, the programmer would need to write custom Resource Manager NetLinx code within the DXP-PRO project file that is downloaded to the target Master. This custom code is written within the custom.axi file.

 

2

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Introduction

Support for i!-TimeManager

This new support is added as a selectable option within the Integrated Applications dialog page. Enabling the Use i!-TimeManager option prompts you to select a time zone and apply Daylight Savings Time rules.

Support for i!-Weather

This new support is added as a selectable Source Type within the Device Data tab of the Device Configuration dialog page. i!-Weather is treated as a source type and not a controlled source. Only one instance of i!-Weather is allowed within the Source list.

Support for G4 Computer Control

This new support is added as a selectable Source Type within the Device Data tab of the

Device Configuration dialog page. G4 Computer Control (G4CC) can be configured as a source type within a system and also available for use within every touch panel that resides within the same system.

DXP-PRO natively supports G4 Computer Control from AMX. DXP-PRO is not intended to support 3rd party (free) VNC clients that are downloadable from the Internet.

When using G4 Computer Control, it is important to understand that DXP-PRO does not setup the USB stick applications for you. It is necessary to configure the corresponding configCC and amxCC application information fields (regarding the Master and touch panels) prior to compiling the DXP-PRO project. Any Master code alterations and configCC field entries must be done prior to launching the amxCC executable.

Support for PictureFrame

This new support is added as a selectable option within the Touch Panel Interfaces dialog page. Selecting this radio box specifies that the output project file for the chosen touch panel will support the use of PictureFrame application on the panel's inactivity page.

Support for TakeNote!

This new support is added as a selectable option within the Touch Panel Interfaces dialog page. Selecting this radio box specifies that the output project file for the chosen touch panel will support TakeNote!

System Startup and Shutdown Macros

These new macros are added to the already existing list within the Navigation and Routing Macros dialog page. These macros add their corresponding buttons to the initial logo page and allow users to specify a series of actions (macro steps) that are performed upon execution of the shutdown or startup macro buttons. These can be zero step macros; if zero steps are used, the buttons are then removed from the touch panel interface.

Volume Level Adjustment for a Macro Step

This new feature is added as an available tab within the Macro Steps dialog page. This feature allows you to set a volume level appropriate to the specific macro's function.

DXP-PRO v1.1 - Programmer’s Guide

3

 

 

 

 

Introduction

Supported Operating Systems

Windows 2000® (Service Pack 4 or greater)

Windows XP® Professional (Service Pack 1)

If you are installing NetLinx Studio on a Windows XP or 2000 machine, you must have Administrator rights to install and run all required System files.

Minimum System Hardware Requirements

Pentium 450 MHZ processor (Pentium 700 MHZ or faster recommended)

Recommended total installed memory (per OS):

Windows 2000: 128 MB

Windows XP (Pro): 256 MB

A VGA monitor running at a minimum resolution of 800 x 600

Windows-compatible CD-ROM drive

Mouse (or equivalent pointing device)

Minimum free disk space: 2 GB

Internet Access (for Web Update functionality)

Minimum System Software Requirements

Verify that you have downloaded the latest versions of these applications to your computer prior to launching DXP-PRO.

Microsoft MDAC v2.6

NetLinx Studio 2.2

TPDesign 3.16

TPDesign4 2.3 (build 353 or higher)

DXP-PRO Image File - If the application fails to detect at least one valid set of background images and at least on valid set of button images, a separate installation of the Image File is required. This image installation is available on the DXP-PRO section of the Application Files page on www.amx.com. If the application fails to detect at least one valid set of background images and at least on valid set of button images the following message box will be displayed and the application terminated.

Downloading the Application

Design XPress - Professional (DXP-PRO) can be downloaded from the AMX web site only after you have successfully logged-in as a registered user. Upon entry to the site, navigate to the Software Center (Tech Center > Application Files) to download the application. You must download all of the files in the Design XPress - Professional section, or you may download the compressed file, which contains all of the other files in the directory.

 

4

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Introduction

The two Adobe Acrobat files included (in addition to this one) are:

The On-Site Installer’s Guide is intended for the equipment installer.

The User-Interface Guide describes the Touch Panel UI, and is provided as a reference for designers, installers, and end-users.

Select Help > Web Update to automatically check for program updates. The program prompts you to download and install any updates that are available.

Supported Touch Panels

G4 Touch Panels

DXP-PRO (version 1.1 or higher) supports the following AMX (G4) touch panel types:

Modero CV7: 7" Modero Touch Panel (with video capabilities)

MVP-7500: 7.5" Modero ViewPoint Touch Panel

MVP-8400: 8.4" Modero ViewPoint Touch Panel

Modero CA12: 12" Modero Touch Panel

Modero CV12: 12" Modero Touch Panel (with video capabilities)

Modero CA15: 15" Modero Touch Panel

Modero CV15: 15" Modero Touch Panel (with video capabilities)

Modero CV17: 17" Modero Touch Panel (with video capabilities)

Unless otherwise specified, these panels encompass both NXD and NXT models (when available). The nomenclature "NXD" represents the Wall Mount version and "NXT" indicates the Table Top (tilt) model.

G3 Touch Panels

Supported G3 touch panel types:

CV6: 6" touch panel with video

CA10: 10.4" touch panel (both NXD and NXT models)

CV10/CG10: 10.4" touch panel with video (both NXD and NXT models)

G3 Touch Panel Considerations

The AXD/AXT CA10, CG10, and CG10 panels do not support the following devices: MAX Integrated Content Server

Video Conferencing devices

Cameras

G4 Computer Control

TakeNote

DXP-PRO v1.1 - Programmer’s Guide

5

 

 

 

 

Introduction

Resource Management (RMS)

PictureFrame

The AXD-CV6 has the same considerations as the other G3 panels, but it also does not support the following devices:

Audio Conferencing

Supported Subsystems and Equipment

DXP-PRO (v1.1) supports the following subsystems and equipment:

Audio/Video Switchers

• ADA

Suite 16

• Autopatch

1YDM

• Autopatch

Half-Y

• Autopatch

Modula

• Autopatch

Precis

• Extron

Crosspoint 124

• Extron

Crosspoint 128

• Extron

Crosspoint 1616

• Extron

Crosspoint 168

• Extron

Crosspoint 84

• Extron

Crosspoint 88

• Extron

Crosspoint Plus 124

• Extron

Crosspoint Plus 128

• Extron

Crosspoint Plus 1616 HV

• Extron

Crosspoint Plus 1616 HVA

• Extron

Crosspoint Plus 168

• Extron

Crosspoint Plus 84

• Extron

Crosspoint Plus 88

• Extron

MAV 128

• Extron

MAV 84

• Extron

Maxtrix 3200

• Extron

Maxtrix 50

• Extron

Maxtrix 6400

• Extron

MSV Series (Inline)

• Extron

SW Series

• Key Digital Systems

KDMSW8x3

• Key Digital Systems

KDSW4x1

• Network Communications

Vikinx Media8

 

6

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Introduction

Audio Conferencing Devices

• ClearOne

XAP400

• ClearOne

XAP800

• ClearOne

XAP800/ XAPTH2

• Polycom

Vortex EF2241

• Polycom

Vortex EF2280

• Polycom

Vortex EF2280/EF2201

The supported Audio conference units are controlled only via Serial (RS-232).

AMX NetLinx Integrated Controllers

NI-700

NI-2000

NI-3000

NI-4000

NXI equipped with a NXC-ME260/64 Master card

Cameras

• Canon

VC-C4

• Epson

ELPDC202

• Kalatel

Cyberdome

• Sony

DXC-990/390

• Sony

DXC-950/970

• Sony

EVI-D100

• Sony

EVI-D70

• Wolfvision

VZC10

CD (Compact Disc) Players

• Denon

DN-C635

• Denon

DN-T625

• Denon

DN-T645

• Marantz

PMD325

DVD (Digital Video Disc) Players

• Adcom

GDV850

• Denon

DVD2900

• Denon

DVD3800

• Denon

DVD9000

• Faroudja

DVP-1500

• Integra

DPS9.1

DXP-PRO v1.1 - Programmer’s Guide

7

 

 

 

 

• Integra
• Kenwood
• Marantz
• Marantz
• Marantz
• Onkyo
• Philips
• Sony
• Yamaha
• Yamaha

Introduction

RDV1

DV5900M

DV8400

PMD930

VC5400

DVS939

Pro DVD 175

DVP-CX777ES

DVD-C940

DVD-S2300MK2

Lighting

• AMX ALD-D48

 

• AMX Radia

 

• Clipsal C-Bus

Note: The Clipsal C-Bus and Dynalite lighting systems

• DynaLite - Any DTK Series

(DXP-PRO v1.1 or higher) are primarily used outside the U.S.

 

• Lehigh DX2

 

• LiteTouch 5000LC

 

• Lutron GRAFIK Eye

 

• Lutron Homeworks Interactive

 

• Lutron RadioRA

 

• Vantage Qlink

 

• Tridonic DALI

Note: The Tridonic Lighting System type does not have

 

feedback; therefore, the buttons in DXP will not depress to

 

reflect feedback.

Other Ethernet - user supplied/modified light

Other Serial - user supplied/modified lights.axi

MAX - Integrated Content Servers by AMX

MAX-MMS and MAX-IMS media servers are supported for G4 touch panels only, via Ethernet control.

MAX-MMS MultiMedia Servers (MAX-MMS125/200/300/350/400M/900M)

MAX-IMS Integrated Music Servers (MAX-IMS500/1000/1500/2500)

DXP-PRO treats these devices essentially the same as any other Ethernet-controlled device (such as MP3 players). To add MAX servers to a DXP-PRO project be aware that:

The MAX-MMS and MAX-IMS servers are controlled only by Ethernet and must be used with AMX G4 touch panels.

The MAX-AVM A/V Module(s) connected to a MAX-MMS server must each be set to a unique zone number (per server).

Refer to the MAX-MMS and MAX-IMS Installation Guides (available online at

www.amx.com) for details.

 

8

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Introduction

If multiple MAX-MMS or MAX-IMS servers are used in a project, each server must have its own unique IP Address.

An identical IP Address can't be assigned to more than one device, with the exception of a MAX. A MAX unit can ONLY have an identical IP only if it uses different zones per display name entry. Ex: A MAX-IMS assigned to IP Address 1.1.1.1 - Zone 1 can exist in the same project as another MAX-IMS assigned to IP Address 1.1.1.1 - Zone 2. If you assign to max units with the same IP Address and Output Zone, you will receive an error message.

MP3 Players

• Audio ReQuest

ARQ2

• Imerge

SoundServer·

• Integra

NAS-2.3 Net-Tune

• Marantz

DH9300·

Plasma Displays

• Hitachi

CMP4201

• Hitachi

CMP5000

• Marantz

PD5020D

• NEC

42VP4

• Runco

PL43HDX

• Runco

PL50HDX

• Runco

PL61GX

• Samsung

SyncMaster 403T

• Sharp

LCM3700

Serial-Interface Devices

For a more concise list of supported A/V Switchers, Audio Conferencing, Video Conferencing, Compact Disc Players, DVD Players, Plasma Displays, VCRs and Video Projectors, refer to the DXP-PRO Supported Devices document, available online at www.amx.com.

User Interfaces

AMX Touch Panels (see the listing in the previous section).

Video Cassette Recorder (VCR)

• JVC

SR-S365U

• Marantz

MV8300

DXP-PRO v1.1 - Programmer’s Guide

9

 

 

 

 

Introduction

Video Conferencing Devices

• Polycom

VS4000

• Polycom

VSX8000

• Tandberg

Tandberg 2500

• Tandberg

Tandberg 6000

The supported Polycom Videoconference units are controlled only via Serial (RS-232). Tandbergs have RS-232 and IP control available.

Video Projection Devices

• Barco

IQG300

• Barco

IQR300

• ChristieDigital

DS30

• ChristieDigital

RoadRunnerL6

• ChristieDigital

VistaS3

• Digital Projection

iVision SXGA

• Eiki

LCXG200

• Epson

PowerLite7800p

• Epson

PowerLite811P

• Epson

PowerLite 8150i

• Epson

PowerLite8300i

• Hewlett Packard

XP8010

• Infocus

SP7200

• Marantz

VP12S1

• Marantz

VP12S2

• NEC

GT Series

• NEC

LT Series

• NEC

MT Series

• NEC

SX Series

• Optoma

EzPro H55

• Optoma

EzPro750

• Optoma

EzPro753

• Optoma

EzPro755

• Runco

CL710

• Runco

DTV1200

• Runco

VX1000ci

• Runco

VX5000c

• Sharp

PGA10S

• Sharp Electronics

PGC45X

• Sharp Electronics

XGV10XU

• Sharp Electronics

XGC50X

• Sharp Electronics

XGC60X

• SIM2

HT300

• Yamaha

DPX1000

 

10

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Introduction

User Information Splash-screen

This dialog appears the first time DXP-PRO is launched, and prompts you to enter the user information that will be used to identify the designer of the DXP-PRO project (Created By, Company Name, Phone, and E-mail Address).

Once the information is entered, this dialog will not automatically be shown again at startup, but can always be accessed via the Edit menu.

The checkbox at the bottom of this dialog can be selected to prevent the dialog from automatically appearing when the program is started, even if no data has been entered.

This dialog is used by the Design XPress Professional software application to fill-in some data within the project.

This means that if you do an initial installation of DXP-PRO you will be asked to enter your information into the User Information dialog. Once this data has been entered, you will not be asked for it again. Consecutive launches of the application display the User Information dialog already populated with the pre-entered data.

If the application is at some point un-installed and then re-installed, you will be prompted to re-enter you information.

If the No longer show on startup selection has been chosen/enabled, you will no longer be asked to enter any user data into the User Information dialog.

DXP-PRO Main Screen

When Design XPress - Professional (DXP-PRO) is initially launched, the second dialog displayed is the Main Screen (FIG. 1). Use the Main Screen as the starting point for creating new projects and opening existing projects. The Main Screen also contains command buttons for copying projects and deleting projects.

There are three main areas on the Main Screen: the Menu Bar, the Project Selection List, and the

Project Maintenance - Command buttons.

FIG. 1 Design XPress - Professional Main Screen

Version and build information for this version of DXP-PRO is listed in the lower right corner of the Main Screen.

Before creating a new project, you should consider opening the sample project and quickly going through the various Wizard dialogs to become familiar with the program.

DXP-PRO v1.1 - Programmer’s Guide

11

 

 

 

 

Introduction

Project Selection List

The Project Selection List is displayed on the DXP-PRO Main Screen (FIG. 1), along with the Main menu and the Create New Project, Open Project, Copy Project, Delete Project, and Exit command buttons.

Each Project is listed by Job Name, Revision, Description, and the date the project was Last Updated. The projects can be sorted in ascending or descending order for each column. Sorting the projects makes it easier to locate the current revision of a project or the last modified project. To sort a column, click on the header cell for the desired column.

Clicking on the header cell will toggle the sort order between ascending and descending orders. You can also set the sort order by selecting View > Sort Projects.

To open a project, select the project and click on the Open Project command button or double-click on the selected project.

To delete a project, click on the project then press the Delete Project command button, or the delete key on the keyboard. The Confirm Delete Request dialog requires you to confirm deletion.

If a project is not exported before deleting, you will not be able to bring the project back into DXP-PRO for modifications at a later date.

Right-click anywhere in the Project Selection List to open the Project Selection List context menu (page 13), and select Sort to access the Project Sorting feature. The listed projects can be sorted by up to four criteria in either ascending or descending order.

• None:

By default, the sort options are all set to none (no sorting).

• Job Name:

Sorts the projects by their Job Names.

• Revision:

Sorts the projects by their Revision numbers.

• Description:

Sorts the projects alphabetically based on the first character of the project

 

description.

• Last Updated:

Sorts the projects by their most recent save date and time.

Use the four sets of radio buttons to specify up to four sorting operations, in sequential order.

After the desired settings have been selected click the Sort button to return to the sorted project list.

Each of the sort criteria options is based on project data that is either entered or displayed on the System Information dialog.

Once a project has been selected, you can use the File menu or the Command buttons to Open,

Copy or Delete the project.

 

12

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Introduction

Project Selection List Context Menu

Right-click anywhere inside the Project Selection List (on the Main Screen) to open the Project Selection List context menu, containing shortcuts to several project-related operations:

New: Launches the Design XPress - Professional Project Wizard to create a new project. This is the same as clicking the Create New Project command button (or selecting File >

New).

Open: Opens an existing project. This is the same as clicking the Open Project command button (or selecting (File > Open).

Copy: Launches the Copy Project dialog, which allows you to save a copy of the selected Project file under a new name. Use the options in the Copy Project dialog to specify a Job Name and enter a description of the file copy. This is the same as clicking the Copy Project command button (or selecting File > Copy).

Delete: Deletes the selected Project file. The program prompts you to confirm this action before the project file is deleted. This is the same as clicking the Delete Project command button (or selecting File > Delete).

Note: If a project is not exported before deleting, you will not be able to bring the project back into Design XPress - Professional for modifications at a later date.

Import: Invokes the Select Import Design XPress Professional File dialog, which allows you to locate and select a Project file to import. This is the same as selecting File > Import Project.

Export: Invokes the Export Project dialog, which allows you to specify a name and target location for the exported Project file. This is the same as selecting File > Export Project.

Sort: Displays the Sort Options window, containing the various sort criteria that can be used to sort the Project Selection List. This is the same as selecting View > Sort Projects.

Main Screen Command Buttons

Create New Project: Click this command button to launch the Design XPress - Professional Project Wizard. Use the Project Wizard to step through the process of designing and configuring the system.

Open Project: Click to highlight a project in the Project Selection List, and click the Open Project command button to open the selected Project. When a project is opened, the first Wizard dialog (System Information) is displayed.

Copy Project: This option creates a copy of an existing Project, and allows you to give the copy a new name (via the Copy Project dialog).

Delete Project: This option allows you to delete a Project from the Project Selection List, and from your hard drive.

To remove a Project from the Project Selection List, without deleting the file from your hard drive, export the file before deleting. Once exported, you can import the file back into DXP-PRO later. To export a DXP-PRO project, select File > Export Project.

If a project is not exported before deleting, you will not be able to bring the project back into DXP-PRO for modifications at a later date.

Exit: Click to exit the application.

DXP-PRO v1.1 - Programmer’s Guide

13

 

 

 

 

Introduction

Copy Project dialog

Click on the Copy Project command button (on the Main Screen) to invoke the Copy Project dialog and save a copy of the selected file under a new name. Use the fields in this dialog to specify a name for the copied project file (in the Job Name field), and to enter a description of the project if desired (in the Description field).

Job Name is required, the Job Description is optional.

Version Information

Program version information is located on the DXP-PRO Main screen (under the Exit button). It is important to have the version information when calling AMX Technical Support. The version information will allow Tech Support to determine if software updates or patches may be available.

The top number (for example, c1.1.6) is the version number of the Configuration Database. The Configuration Database determines what options are available in wizard for different pieces of equipment.

The lower number (for example, v1.1 Build 103) is the version and build number of the actual DXP-PRO application. A change in the Version number indicates a change in the functionality of the application. A change in the Build number indicates an enhancement in the current functionality of the current revision. Every change to the Version number will also change the build number, but not every change to the Build number will change the Version number.

DXP-PRO Menu Bar

There are four items in the menu bar (on the Main Screen):

File menu

Edit menu

View menu

Help menu

File Menu

The Design XPress - Professional (DXP-PRO) File menu contains several file control options:

New: Launches the Project Wizard, to create a new DXP-PRO project file.

Open: Opens an existing DXP-PRO project file.

Copy: Allows you to copy the active project file. This option launches the Copy

Project dialog (see the above section for more information).

Delete: Allows you to delete the selected Project from your hard drive.

Import Project: Allows you to import a file into the Project Selection List.

Export Project: Allows you to export the active Project.

Exit: Exits the DXP-PRO application.

 

14

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Introduction

DXP-PRO maintains all of its projects in a single database. To move a project from one DXP-PRO installation to another (for example moving a project from your desktop computer to your laptop), you must Export the project from one computer and import the project on the other computer.

The New, Open, Copy, Delete and Exit options are also available via the command buttons along the bottom of the Main Screen.

Edit Menu

The Edit menu provides several customizable settings for DXP-PRO:

• User

Opens the User Information dialog, where you can enter and save basic user

Information:

information for the active Project (User Name, Company Name, Phone and

 

E-mail Address).

 

The user's name and company are used to auto complete the Name and

 

Company fields within the Project Information dialog. The user's phone number

 

and e-mail address are not currently used, but are included for future DXP-

 

PRO features.

CD Titles Opens the CD Titles Maintenance dialog, where you can add/remove and edit Maintenance: CD information (Artist and Title), as well as automatically retrieve CD

information from an on-line CD database (via freedb.org, on an Internet-enabled computer).

For more information on this dialog, refer to the Using the CD Titles Maintenance dialog section on page 58.

• Preferences: Opens the Preferences dialog, containing various global preference settings for DXP-PRO, including enable/disable warning messages within the wizard, setting a default NetLinx Master IP Address, selecting a progress bar style, and selecting default folders for Projects and IR files.

View Menu

The View menu contains options for sorting the Project list:

• Sort

Click to access the Project Sorting window. The listed projects can be sorted by

Projects:

up to four criteria in either ascending or descending order.

Help Menu

The Help menu contains the following options:

• Contents:

Opens the online help file.

• Web

Launches the Web Update application to search the AMX site for an update to the

Update:

DXP-PRO software. Selecting Yes will close DXP-PRO, begin the download of

 

the update, and run the installation of the update.

 

You must have an active Internet connection for Web Update to work.

• About:

Displays the DXP-PRO splash screen. This screen displays the version and build

 

numbers for DXP-PRO. The version and build numbers can also be found in the

 

lower right hand corner of the Main Screen.

DXP-PRO v1.1 - Programmer’s Guide

15

 

 

 

 

Introduction

Before You Begin

The first step in defining the system is to run the Design XPress - Professional (DXP-PRO) application. This Windows® based wizard should be run in the office well in advance of going onsite. With this wizard you define the locations of all equipment, the number of user interface devices, lighting scenes, source equipment, etc.

There is one important note related to the use of lighting addresses. Lighting addresses consist of both a keypad address and button. The keypad address is the address of the keypad for the lighting system being used and must be represented in the format for that lighting system. The formats for the supported lighting systems are listed below:

Lighting Address Formats

Lighting Controller

Address Format

DXP-PRO Example

 

 

 

AMX ALD-D48 Lighting System

N/A

1 (greyed-out)

 

 

 

AMX Radia

AXlink Device ID (1-255)

96

 

 

 

Clipsal C-Bus

Group Address:Network Address (using a

C1:00

 

hexadecimal value and a local network

 

 

address)

 

 

 

 

Dynalite

DynaLite area

18

 

 

 

Lehigh DX2

Lehigh area (valid range 1 - 16)

1

 

 

 

Lutron GRAFIK Eye

Master

17

 

 

 

Lutron Homeworks Interactive

Processor:Link:Keypad

1:4:9

 

 

 

Lutron RadioRA

Keypad Address

12

 

Note: Keypad address 12 is reserved as

 

 

the Serial RadioRA interface. This

 

 

interface is a virtual keypad, and does not

 

 

contain any buttons.

 

 

 

 

LiteTouch 5000

Keypad Address

1AD

 

(3-digit hexadecimal value)

 

 

 

 

Tridonic DALI

Tridonic group address

0

 

(valid range is 0 - 15)

 

 

 

 

Vantage Qlink

Master:Keypad

1:5

 

 

 

Once the application entries are completed, the touch panel files, source code, NetLinx Studio project file, text files (CD titles, etc.), and report file are all created.

Configuring your Program Preferences

Select Edit > Preferences to open the Preferences dialog, where you can specifically set various user preferences for DXP-PRO. The options in this dialog include:

Show Splash Screen on Startup: A toggling option to show the DXP-PRO splash screen when the program is started. If this item is not checked the splash screen can be viewed by selecting Help > About.

Warning on duplicate Channel Preset Names and Channels: Alerts you to the creation of duplicate channel preset names and channels. All Channel Preset names and channels must be unique.

 

16

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Introduction

Warning on duplicate IP Addresses: Alerts you to the assignment of duplicate IP Address to a device being controlled via an Ethernet connection. All IP Addresses being used by Ethernet-capable devices must be unique.

Warn on duplicate IR Functions and Channels: Alerts you to the creation of duplicate IR functions and Channels. All IR Function and Channel assignments must be unique.

Warn on duplicate Lighting Scene Names: Alerts you to the creation of duplicate Lighting Scene names. All Lighting Scene names must be unique.

Auto Map IR Function on File Selection: With this option enabled, the Auto Map IR Functions option (in the IR Mapping tab of the Device Configuration dialog) is enabled by default.

Progress Status Size: Use the radio buttons to select the size and style of the progress

bar:

Small (animated progress list): By default, the program uses the small progress

bar.

Large (gears): This option displays an animated graphic (representing working gears) instead of the progress bar.

Detailed Import/Export Status: This option displays the name of each file as it is being imported or exported, along the bottom of the progress bar window.

Project Folder: Click the Browse button to navigate to the desired target folder for all Project saves. By default, the Project Folder is set to:

Program Files\AMX Control Disc\Design XPress Professional\Projects.

If you select a root directory (i.e. C:\) as the target directory, DXP-PRO automatically creates a "Projects" folder for the project files. This folder is only created if you target a root directory (as apposed to any other existing directory).

IRLib Path: Click the Browse button to navigate to the desired target folder for all IR (*IRL) files. By default, the IR Folder is set to:

Program Files\Common Files\AMXShare\IRLs.

Default NetLinx Master: The IP Address field allows you to enter the IP Address of the target NetLinx Master receiving the Project Files.

Getting Started with the Sample Project

To launch the DXP-PRO Project Wizard:

1.Select the sample project (highlight "DXP-PRO Sample" in the Project Selection List (on the Main Screen).

2.Click the Open Project command button. This invokes the first Project Wizard dialog: System Information, containing a summary of the system information for this project.

Once all the required information is entered in this dialog, you can proceed to the next dialog by selecting the Next>> button. When no additional dialogs are required this button will be inactive.

DXP-PRO v1.1 - Programmer’s Guide

17

 

 

 

 

Introduction

When creating a new project it is important to go through each dialog in order, using the Next>> button. This helps to insure that no information is missed and that the project configuration is complete. Later, when editing the project, the Jump to list allows quicker and easier access to specific dialogs.

When you create a new project, the Wizard dialogs become available as selections in the Jump To list only after they have been populated with the required data. In this case of the sample project, all Wizard dialogs are available since the project is complete.

To Create a New Project:

1.Click on the Create New Project command button. This launches the Design XPress - Professional Project Wizard, which steps you through the process of designing and configuring a control system. Refer to the Launching the DXP-PRO Project Wizard section on page 20 for more information.

 

18

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Using the DXP-PRO Wizard

Using the DXP-PRO Wizard

Design Xpress - Professional (DXP-PRO) uses a Project Wizard to step you through the process of designing a control system. To launch the Wizard, click the Create New Project button on the Main Screen.

Required Information for Building a System

Before you can begin to use Design XPress - Professional (DXP-PRO) to build a system you must first gather information about the installation. The most obvious is the project name and a description of the project. Additionally, you will need the following information:

A list of user interfaces (Touch Panels) models being used.

A list of the audio and/or video sources that will be used (along with a list of their input/output locations on the switcher(s)). The type of DSS system and a list of channel/ music favorites, if a DSS receiver is included in the system. (DXP-PRO can include either a DirecTV or Dish Network system.)

If a CD changer is included in the system a list of the installed CDs or the CD collection should be available while creating the system.

The following information is needed for each type of lighting system supported by DXP-PRO: system type, baud rate (if applicable), system address, and button or preset numbers.

The lighting system should be configured and programmed before button or preset numbers are entered into DXP-PRO.

This information can be collected in multiple lists or in some instances can be drawn on a floor plan. Several worksheets are included in the DXP-PRO help file to assist you in collecting this information.

Common Mistakes

The most common mistake made is modifying the software and then using the application to make changes. As mentioned before, all software changes outside of the special CUSTOM.AXI file will be overwritten. Only modify the source code generated by DXP-PRO if there is a strong desire to alter the behavior of the code. To add features, new subsystems, etc. make the changes in the custom file to avoid the frustration.

DXP-PRO is not a "simple" NetLinx program. Because of the scope and number of features designed into the system, the code can be quite daunting to someone looking at it, even an experienced NetLinx programmer. Installers with NetLinx experience should not expect to be able to modify the software the first time they see it. Most of the features are tied into another feature or affect another part of the software. The architecture of the system design and the function of the file being modified should be understood prior to proceeding with changes.

Another common mistake is forgetting to properly address a device. Unless all devices are addressed as defined in the report file the system will not work as desired.

DXP-PRO v1.1 - Programmer’s Guide

19

 

 

 

 

Using the DXP-PRO Wizard

Launching the DXP-PRO Project Wizard

Design XPress - Professional (DXP-PRO) uses a Project Wizard to step you through the process of designing and configuring a business-room oriented control system. This is done through the use of configuration dialogs (described in the following sections).

There are three ways to approach launching the DXP-PRO Project Wizard:

Select File > New.

Click the Create New Project command button (in the lower-left corner of the Main

Screen).

Double-click on the sample project ("DXP-PRO Sample Project") in the Project Selection List.

This invokes the first Project Wizard dialog: System Information, containing a summary of the system information for this project. If you are starting a new project, the Created By and Company fields are pre-populated with the information entered in the User Information dialog at startup. Also, there are two default devices (an A/V Switcher and a Video Projector) present in the Device Information table, ready for you to configure (see the System Information topic for details).

To create a new project, click on the Create New Project command button. This launches the Project Wizard, which steps you through the process of designing a control system.

At the lower-left corner of this and all Wizard dialogs is a drop-down list titled Jump To.

Click the down-arrow to open a list of all Wizard dialogs, and select any dialog from this list to jump to that dialog.

Additionally, all of the dialogs in the Project Wizard have a set of Navigation Control buttons along the bottom of the dialog to allow you move back and forth through the wizard dialogs, and save or cancel your changes.

When you create a new project, the Wizard dialogs become available as selections in the Jump To list only after they have been populated with the required data. In this case of the sample project, all Wizard dialogs are available since the project is complete.

Some of the Project Wizard configuration dialog include:

System Information (page 22)

Which Screens? (page 41)

Integrated Applications (page 42)

Lighting Presets (page 44)

Touch Panel Interfaces (page 46)

Choose Touch Panel Theme (page 49)

Selecting a custom touch panel theme adds 3 more Choose Touch Panel…options to the Which Screens dialog and to the Jump to drop-down menu

Choose Touch Panel Background (page 50)

Choose Touch Panel Buttons (page 50)

 

20

DXP-PRO v1.1 - Programmer’s Guide

 

 

 

Loading...
+ 122 hidden pages