AMX AXF-MINI MINI-CARDFRAME (UP TO 3 AXC CONTROL CARDS) User Manual
Size:
391.84 Kb
Download

instruction manual

AXF-MINI

Axcess MINI CardFrame

Axcess Central Controllers

AMX Limited Warranty and Disclaimer

AMX Corporation warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX Corporation, with the following exceptions:

Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year.

Disk drive mechanisms, pan/tilt heads, power supplies, MX Series products, and KC Series products are warranted for a period of one (1) year.

Unless otherwise specified, OEM and custom products are warranted for a period of one (1) year.

Software is warranted for a period of ninety (90) days.

Batteries and incandescent lamps are not covered under the warranty.

This warranty extends only to products purchased directly from AMX Corporation or an Authorized AMX Dealer.

AMX Corporation is not liable for any damages caused by its products or for the failure of its products to perform. This includes any lost profits, lost savings, incidental damages, or consequential damages. AMX Corporation is not liable for any claim made by a third party or by an AMX Dealer for a third party.

This limitation of liability applies whether damages are sought, or a claim is made, under this warranty or as a tort claim (including negligence and strict product liability), a contract claim, or any other claim. This limitation of liability cannot be waived or amended by any person. This limitation of liability will be effective even if AMX Corporation or an authorized representative of AMX Corporation has been advised of the possibility of any such damages. This limitation of liability, however, will not apply to claims for personal injury.

Some states do not allow a limitation of how long an implied warranty last. Some states do not allow the limitation or exclusion of incidental or consequential damages for consumer products. In such states, the limitation or exclusion of the Limited Warranty may not apply. This Limited Warranty gives the owner specific legal rights. The owner may also have other rights that vary from state to state. The owner is advised to consult applicable state laws for full determination of rights.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, AMX CORPORATION MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. AMX CORPORATION EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY.

 

Table of Contents

Table of Contents

 

Product Information .................................................................................................

1

Specifications ....................................................................................................................

1

Power Configuration Options ............................................................................................

2

Server/Remote PWR..............................................................................................................

.. 2

Server/Local PWR...............................................................................................................

..... 2

Master .........................................................................................................................

............. 3

AXF-MINIAxcess MINI CardFrame

i

 

 

 

 

Table of Contents

 

ii

AXF-MINIAxcess MINI CardFrame

 

 

 

Product Information

Product Information

The AXF-MINIAxcessMini-CardFramecan be used as astand-alonecontrol system or as an addon to existing Axcess or Axcent2 systems. Thestand-aloneconfiguration uses an optional AMX Enhanced Master card(AXC-EM)and up to three optional AXC control cards. Theadd-onconfiguration uses up to three optional AXC cards and is connected via the AXlink data/power bus along with control panels and AXB AXlink controllers. The MINI CardFrame features a new backplane design incorporating all card server functions, eliminating the need for a dedicated card slot. The CardFrame can be easily installed into a rack, shelf, or at a remote site to avoid costly cable runs.

Cable Support Bracket (optional)

Built-inCard Server

AXC-EMEnhanced Master Card

Three AXC Control

Card Slots

FIG. 1 AXF-MINIAxcessMini-CardFrame

Specifications

The following table lists the specifications for the AXF-MINI.

AXF-MINISpecifications

Dimensions (HWD):

1.75" x 17" x 13.64" (4.5 cm x 43.2 cm x 34.7 cm)

 

 

Weight:

5.5 lbs. (2.49 kg)

 

 

Backplane Components:

 

Master Card Slot

One master processor card slot.

 

 

Control Card Slots 1 - 3

Three standard Axcess control card connections (slots 1, 2, and 3).

 

Slots 1 - 3 are wired according to the installed card. Refer to the appro-

 

priate cards wiring information for instructions.

 

 

AXlinx connector

Install AXlink data/power bus wiring as shown below after device num-

 

ber is set. Remove and reconnect AXlink terminal after changing

 

device number to enter the new number in memory.

 

 

PWR Connector

The three PWR wiring configurations are:

 

• Server/Remote power

 

• Server/Local power

 

• Master

 

Refer to the Power Configuration Options section for wiring information

 

on each configuration.

 

 

AXF-MINIAxcessMini-CardFrame

1