AMX 10dBi Yagi Antenna NXA-WAP2410A User Manual

Size:
2.2 Mb
Download

10dBi yagi antenna

The NXA-WAP2410A10dBi yagi antenna can be used as a bridge between two networks or forpoint-to-pointcommunications. They are field adjustable for vertical or horizontal polarization with matched principal plane beamwidths for optimum performance in either

orientation. This design also provides improved front-to-backratio and sidelobe suppression that reduces interference. All models feature a robust mounting structure for consistent performance regardless of weather conditions.

Field adjustable to allow vertical or horizontal polarity. Eliminates co-channelinterference from neighboring radiators. Polarity markings molded on the antenna ensure installation in the correct orientation.

Optional, articulating mount. Allows precise adjustment of the antenna both vertically and horizontally.

All antennas include a robust mast mount bracket designed to withstand 125 mph wind.

Matched principal plane beamwidths with excellent sidelobe suppression and cross-polarizationrejection of more than 20 dB. Provides superior signal quality with enhanced gain performance and minimal interference from neighboring radiators.

23 dB front-to-backratio permits less physical separation on the tower thus adding mounting flexibility at installation sites where space is limited.

Attractive weather-proofradome constructed of UV resistant material. Provides robust andtrouble-freeuse in harsh outdoor environments.

10dBi yagi antenna

NXA-WAP2410A(FG2255-22)

GENERAL SPECIFICATIONS:

• 2.4 GHz ISM enclosed yagi antenna series

POLARIZATION:

• Vertical or horizontal, linar (user adjustable)

NOMINAL IMPEDANCE:

• 50 Ohms

MOUNTING:

Heavy duty yagi mounting bracket (included) permits mast mounting on masts up to 2" O.D. MYK18 adjustable wall/pipe mount allows 180° (included angle) azimuth and elevation adjustment (sold separately).

MECHANICAL SPECIFICATIONS: WIND SURVIVAL:

• 125 mph

LATERAL THRUST AT RATED WIND:

• 5.8 lbs.

EQUIVALENT FLAT PLATE AREA:

• 0.060 ft2

CABLE:

• 3' (914.4mm) coax

LENGTH:

4.5" L x 3" OD (114mm L x 76mm OD)

WEIGHT:

• 1 lbs (0.5 kg)

ELECTRICAL SPECIFICATIONS: FREQUENCY RANGE:

2400-2485MHz

NORMAL GAIN:

• 10 dBi

HORIZONTAL BEAMWIDTH:

• 55°

VERTICAL BEAMWIDTH:

• 55°

VSWR:

• < 1.5:1

FRONT-TO-BACKRATIO:

• 23 dB

MAXIMUM POWER:

• 5 Watts

NXA-WAP2410AElevation Cut

NXA-WAP2410AAzimuth Cut

ARGENTINA • AUSTRALIA • BELGIUM • BRAZIL • CANADA • CHINA • ENGLAND • FRANCE • GERMANY • GREECE • HONG KONG • INDIA • INDONESIA • ITALY • JAPAN

LEBANON • MALAYSIA • MEXICO • NETHERLANDS • NEW ZEALAND • PHILIPPINES • PORTUGAL • RUSSIA •

SINGAPORE • SPAIN • SWITZERLAND

• THAILAND • TURKEY • USA

ATLANTA • BOSTON • CHICAGO • CLEVELAND • DALLAS • DENVER • INDIANAPOLIS • LOS ANGELES • MINNEAPOLIS • PHILADELPHIA • PHOENIX •

PORTLAND • SPOKANE • TAMPA

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1

.469.624.7400 • 469.624.7153 fax • www.amx.com

© 2006 AMX. All rights reserved. AMX and the AMX logo are all trademarks of AMX. AMX reserves the right to alter specifications without notice at any time.