TRIUMPH CADET® 3 ELONGATED TOILET
2491.016
•Vitreous china
•EverClean™ anti-microbial surface which inhibits the growth of stain and odor causing bacteria, mold, and mildew
•Low-consumption (6.0 Lpf/1.6 gpf)
•Features the Cadet®3 Flushing System
•Elongated siphon action jetted bowl
•Fully-glazed 2-1/8" trapway with 2" ball pass
•Generous 9" x 8" water surface area
•Close-coupled tank with flat tank cover for superior storage
•Oversized 3" flush valve with chemical resistant flapper
•Chrome trip lever
•Speed Connect™ tank-to-bowl coupling system
•Sanitary dam on bowl with four point tank stabilization
•2 color-matched bolt caps
•100% factory flush tested
•5 year warranty
3014.016 Elongated Bowl
4007.100 Tank
Nominal Dimensions:
768 x 472 x 733mm (30-1/4" x 18-9/16" x 28-7/8")
Fixture only, seat and supply by others
Alternate Tank Configurations Available:
4007.500 Tank complete with Aquaguard Liner
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions
•Los Angeles Department of Water and Power Supplementary Purchase Specification for Non-Adjustability
To Be Specified:
Color: White Bone Linen
Seat: #5325.010 Elongated Champion® Slow Close solid plastic seat and cover with easy lift off feature
Seat: #5284.016 Elongated EverClean™ anti-microbial solid plastic seat and cover
Seat: #5311.012 Elongated Laurel molded wood seat and cover
Supply with stop:
TRIUMPH CADET® 3
ELONGATED TOILET
VITREOUS CHINA
|
768mm |
|
|
|
FINISHED WALL |
(30-1/4) |
|
|
|
|
|
|
||
25mm ± 6mm |
|
|
|
|
(1 ± 1/4) |
|
|
|
|
237mm |
|
|
472mm |
|
|
|
(18-9/16) |
||
(9-5/16) |
|
|
||
|
|
|
||
|
470mm |
|
|
|
|
(18-1/2) |
|
|
|
|
C/L OF SEAT POST HOLES |
733mm |
||
|
140mm (5-1/2 CENTERS) |
|||
|
|
SUPPLY |
(28-7/8) |
|
|
|
|
||
|
|
AS |
|
|
102mm (4) |
|
REQ'D. |
|
|
|
381mm |
|
||
|
|
(15) |
|
|
|
|
*203mm |
352mm |
|
|
|
(8) |
(13-7/8) |
|
216mm |
348mm |
|
237mm |
|
FINISHED |
(9-5/16) |
|||
(8-1/2) |
(13-11/16) |
|||
FLOOR |
*152mm |
|||
|
|
|||
|
|
|
||
305mm |
C/L OF OUTLET |
|
(6) |
|
(12) |
|
|
|
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2007 American Standard Inc. |
Revised 08/07 |