American Standard 6065.565, 6065.525, 6065.121, 6065.162, 7095.121 User Manual

...
0 (0)

Installation Instructions

SELECTRONIC™

PROXIMITY TOILET FLUSH VALVE 1.28 & 1.6 GPF

MODEL NUMBERS

6065.161 6065.162

6065.121 6065.122

6065.565 6065.525

7095.121

Bowls

CLOG RESISTANT

• Self-cleaning piston valve prevents clogging and reduces maintenance.

ONE SENSOR FITS ALL

Only 1 sensor for entire Selectronic™ line of faucets, urinals, and flush valves.

Range can be adjusted manually or with optional remote control.

Sensor Features Low Battery Indicator.

Certified to comply with ASME A112.19.2M

© 2008 AS America, Inc.

M968699 Rev. 1.10

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To learn more about American Standard Faucets visit our website at: www.americanstandard-us.com or U.S. customer's e-mail us at: faucetsupport@americanstandard.com

For Parts, Service, Warranty or other Assistance,

please call 1-800-442-1902 (In Canada: 1-800-387-0369)

(InTorontoArea onlly::1--905--3061093))

American Standard 6065.565, 6065.525, 6065.121, 6065.162, 7095.121 User Manual

Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

UNPACKING

All American Standard Products Are Water Tested At Our Factory.

Some Residual Water May Remain In The Valve During Shipping.

 

 

1. Remove the Flush Valve items from the carton. The illustration below shows all items after they have been removed from the carton. Some items may be packaged partially assembled to other items.

1. Flush Valve Assembly

5. Sweat Solder Adapter

2. Down Tube and Vacuum Breaker

6. Cover Tube

3. Spud Coupling Nut and Washers

7. Wall Escutcheon

4. Spud Flange

8. Supply Stop

 

9. Installation Instructions

CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

DO NOT REMOVE PROTECTIVE FILM FROM SENSOR

EYE UNTIL INSTALLATION IS COMPLETE.

 

6

7

5

8

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Instructions

SELECTRONIC™

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROXIMITY TOILET FLUSH VALVE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.28 & 1.6 GPF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MODEL NUMBERS

 

 

 

 

 

 

 

 

 

 

 

 

 

6065.161

6065.162

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6065.121

6065.122

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6065.565

6065.525

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7095.121

 

 

 

 

2

 

 

 

 

 

 

 

Installation

Bowls

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

M968699 Rev. 1.9

 

 

 

 

 

 

 

 

 

 

CLOG RESISTANT

 

 

 

 

 

 

 

 

 

 

• Self-cleaning piston valve prevents clogging and reduces maintenance.

 

 

 

 

 

 

ONE SENSOR FITS ALL

 

 

 

 

 

 

 

 

 

 

• Only 1 sensor for entire Selectronic™ line of faucets, urinals, and flush valves.

 

 

 

 

 

 

 

 

 

 

• Range can be adjusted manually or with optional remote control.

 

 

 

 

 

 

 

 

 

 

• Sensor Features Low Battery Indicator.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Certified to comply with ASME A112.19.2M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

© 2008 AS America, Inc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE TO INSTALLER: Please give this manual to the customer after installation.

 

 

 

 

 

 

 

 

 

To learn more about American Standard Faucets visit our website at: www.americanstandard-us.com

 

 

 

 

 

 

 

 

or U.S. customer's e-mail us at: faucetsupport@americanstandard.com

 

 

 

 

 

For Parts, Service, Warranty or other Assistance,

please call 1-800-442-1902 (In Canada: 1-800-387-0369)

(InTorontoArea onlly::1--905--3061093))

4

M968699 Rev. 1.10

1

Fig. 1

 

 

GENERAL DESCRIPTION:

Roughing-in Dimensions

 

DETECTION ZONE

SELECTRONIC™

 

 

 

400mm-800mm

PROXIMITY TOILET

 

 

 

(15-3/4 TO 31-1/2)

 

 

 

 

FLUSH VALVE

 

 

72mm

FINISHED WALL

Exposed Flushometer

 

(2-7/8)

 

 

 

57mm

for 1-1/2" Top Spud Fixtures

 

 

(2-1/4 MIN.)

Exclusive, self cleaning piston-type flush

 

 

 

 

 

15˚

valve with proximity operation and

116mm

 

 

manual override.

Operates on DC

(4-5/8)

 

 

(batter y) power. Recommended

 

 

 

 

 

 

operating pressure 35 to 80 psi. Can

 

 

 

install left or right-handed. Detection

MANUAL

 

 

Zone can also be adjusted manually, or

 

 

with optional remote control.

OVERRIDE

 

 

BUTTON

SUPPLY

 

 

 

 

DN 25mm

 

 

 

*CRITICAL

(1” I.P.S.)

 

 

 

 

 

 

 

LEVEL

 

 

Right or Left Hand Installation

 

-C-L-

 

 

115mm-134mm

 

See (Section 5) for converting Flush

 

(4-1/2 TO 5-1/4)

Y

 

 

X

 

 

Valve to Left Hand Installation.

-C-L-

 

 

 

 

 

FOR 1-1/2" TOP

 

 

 

 

SPUD FIXTURES

 

 

 

MODEL

X

Y

-C-L-

 

 

 

 

6065.121

293mm

409mm

165mm

6065.161

(11-1/2)

(16-1/8)

(6-1/2)

6065.122

683mm

799mm

565mm

6065.162

(27)

(31-1/2)

(22-1/4)

 

 

 

 

*Note: The Critical Line (-C-L-) on Vacuum

Breaker must typically be 6" (152mm) above fixture. Consult Codes for details.

RECOMMENDED TOOLS; Fig. 2

1.Teflon Tape

2.Flat Blade Screwdriver

3.Adjustable Wrench

4.Tape Measure

5.Hacksaw

6.Tubing Cutter

7.File

8.For Sweat Connection; Solder and Torch

9.2.5mm Hex Wrench

10.1.5mm Hex Wrench

Fig. 2

 

 

 

 

1

2

 

 

3

 

4

 

 

 

 

10'

 

 

 

 

 

 

 

 

 

6

 

5

 

 

8

 

7

 

9

10

PRIOR TO INSTALLATION

Note: Prior to installing the Selectronic™Flush Valve

• Flush all water lines prior to operation (See Step 4). Dirt

the following items must be installed.

and debris can cause flush valve to run continuously.

1. Water Closet

• With the exception of Supply Stop Inlet, DO NOT use

 

pipe sealant or plumbing grease on any valve component

2. Drain line

or coupling!

 

3. Water supply line

• Protect the chrome or special finish on the Flushometer.

DO NOT USE toothed tools on finished surfaces to install

 

IMPORTANT:

or service these valves. Also see “Care and Cleaning”

section of this manual.

• All plumbing must be installed in accordance with

 

applicable codes and regulations.

• This product contains mechanical and/or electrical

 

components that are subject to normal wear. These

• Water supply lines must be sized to provide an

components should be checked on a regular basis and

adequate volume of water for each fixture.

replaced as needed to maintain the valve’s performance.

 

 

 

M968699 Rev. 1.10

2

Loading...
+ 6 hidden pages