LOFT™
ABOVE-COUNTER SINK
VITREOUS CHINA
LOFT™ ABOVE-COUNTER SINK
0660.000
•Stylish above-counter sink
•Made from vitreous china
•Integral faucet deck for single-control faucet mounting
•Generous bowl depth
•Center drain outlet without overflow
•Can be mounted in Brook console table
•Supplied with cutout template and sealant
0660.312 Same as above with front overflow
Nominal Dimensions:
451mm (17-3/4") Round
Bowl sizes:
376mm (14-3/4") round 127mm (5") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
•ASME A112.19.2M for Vitreous China Fixtures
•CAN/CSA B45 series
•A1995 National Building Code, section 3.7 and CAN/CSA - B651-M90 and OBC 3.7
To Be Specified:
Color: White Bone Linen Black
Faucet*:
Faucet Finish:
Supplies:
1-1/4" Trap:
To Be Specified (Optional):
Brook Console Table Frame 9373.100
Frame Finish
Brook wood top 9474.670 pre-cut for Loft and Morning above counter sink
Wood Top Finish
FINISHED WALL
OR SPLASHBACK
123mm (4-7/8)
286mm (11-1/4)
COUNTERTOP (BY OTHERS)
*165mm(6-1/2)
*222mm(8-3/4)
SUPPLIES
AS REQ'D
1-1/4 O.D. WASTE
1-1/4 O.D. TAILPIECE
35mm |
OPTIONAL |
|
(1-3/8) DIA. HOLE |
||
|
83mm (3-1/4)
222mm (8-3/4)
C/L
COUNTERTOP CUTOUT 330mm (13) DIA.
ø376mm (14-3/4)
ø451mm (17-3/4)
|
SEALING |
|
COMPOUND |
|
76mm |
|
(3) |
|
95mm |
|
(3-3/4) |
203mm |
178mm |
(7) |
|
(8) |
|
|
787mm |
|
(31) |
* See faucet section for additional models available
FINISHED FLOOR
NOTES:
* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
J18
© 2008 AS America Inc. Revised 2/08