American Standard 3128.018, Cadet 4112.016, Cadet 4110.016, 2315.016, 5385.010 User Manual

0 (0)
American Standard 3128.018, Cadet 4112.016, Cadet 4110.016, 2315.016, 5385.010 User Manual

BABY DEVORO™ 10" HIGH

ROUND FRONT TOILET

VITREOUS CHINA

BABY DEVORO™ 10" HIGH ROUND

FRONT TOILET

2315.016

Vitreous china

Low-consumption (6.0 Lpf/1.6 gpf)

10-1/4" rim height

10" roughing-in

Siphon flush action

AquaForce™ flushing technology

Speed Connect® tank/bowl coupling system

Color matched trip lever

Sanitary bar on bowl

2 bolt caps

100% factory flush tested

Fully-glazed trapway

3128.018 Bowl with bolt caps

4110.016 Tank complete with coupling components and tank trim

Also available for 12" and 14" rough-in installations:

4112.016 12" Rough Tank

4114.016 14" Rough Tank

Nominal Dimensions:

622 x 495 x 660mm

(24-1/2" x 19-1/2" x 26")

Component parts:

5385.010 Seat and cover (in white and bone only)

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2 for Vitreous China Fixtures

To Be Specified:

Color: White Bone

Seat: Olsonite #126-CC open front seat less cover

Seat: Church #1580C open front seat less cover

Supply with Stop:

 

FINISHED WALL

 

 

 

622mm

 

 

 

(24-1/2)

 

19mm ± 6mm

 

 

(3/4

± 1/4)

 

495mm

 

 

 

(19-1/2)

 

184mm

 

 

(7-1/4)

 

 

 

381mm

 

 

 

(15)

152mm

 

 

 

(6)

 

C/L SEAT POST HOLES

C/L

 

 

140 mm (5-1/2) CENTERS

 

 

 

 

 

 

660mm

 

 

 

(26)

 

 

SUPPLY

 

(4)

 

AS

 

 

REQ'D

260mm

102mm

 

 

FLOOR *159mm(6-1/4)

 

(10-1/4)

 

 

FINISHED

 

 

13mm

 

 

 

(1/2)

 

 

178mm

273mm

229mm

 

(7)

(10-3/4)

(9)

 

 

C/L OUTLET

 

254mm

 

318 mm

 

(10)

 

(12-1/2)

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254mm (10) FROM FINISHED WALL TO C/L OF OUTLET *DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. SUPPLY NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

 

M48

 

© 2008 AS America Inc.

Revised 7/06

 

Loading...