CADET® 3
ELONGATED TOILET
VITREOUS CHINA
CADET® 3 ELONGATED TOILET |
|
|
2383.012 |
|
|
• Vitreous china |
|
|
• Low-consumption (6.0 Lpf/1.6 gpf) |
|
|
• EverClean® surface inhibits the growth of |
|
|
stainand odor-causing bacteria, mold, |
|
|
and mildew on the surface |
|
|
• Features the Cadet® 3 Flushing System |
|
|
• Elongated siphon action jetted bowl |
|
|
• Fully-glazed 2-1/8" trapway with 2" ball pass |
|
|
• Generous 9" x 8" water surface area |
|
|
• Close-coupled tank with flat tank cover for |
|
|
superior storage |
|
|
• Oversized 3" flush valve with chemical |
|
|
resistant flapper |
|
|
• Chrome trip lever |
|
|
• Speed Connect® tank-to-bowl |
|
|
coupling system |
|
|
• Sanitary dam on bowl with four point |
|
|
tank stabilization |
|
|
• 2 color-matched bolt caps |
|
|
• 100% factory flush tested |
|
|
• 5 year warranty |
|
|
3014.016 Elongated Bowl |
|
|
4021.016 Tank |
SEE REVERSE FOR ADDITIONAL ROUGHING-IN |
|
Nominal Dimensions: |
DIMENSIONS |
|
|
||
768 x 438 x 733mm (30-1/4" x 17-1/4" x 28-7/8") |
|
|
Fixture only, seat and supply by others |
|
|
To Be Specified: |
||
Alternative Tank Configurations Available: |
||
Color: White Bone Silver Linen Black |
||
4021.500 Tank complete with Aquaguard Liner |
||
Seat: #5325.010 Elongated Champion® Slow Close |
||
4021.600 Tank complete with tank cover |
solid plastic seat and cover with easy lift off feature |
|
locking device |
||
Seat: #5284.016 Elongated EverClean® solid plastic |
||
4021.700 Tank complete with Aquaguard Liner |
seat and cover |
|
and tank cover locking device |
Seat: #5321.110 EverClean® Elongated Seat with |
|
4021.800 Tank complete with trip lever located |
Slow Close Snap-Off Hinges |
|
on right side |
Supply with stop: |
4021.900 Tank complete with tank cover locking device and trip lever located on right side
4021.950 Tank complete with Aquaguard liner,
tank cover locking devise, and trip lever on right side
Compliance Certifications - |
|
|
|
Meets or Exceeds the Following Specifications: |
|
|
|
• ASME A112.19.2M for Vitreous China Fixtures - |
|
|
|
includes Flush Performance, Ball Pass Diameter, |
NOTES: |
||
Trap Seal Depth and all Dimensions |
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF |
||
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. |
|||
• Los Angeles Department of Water and Power |
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED |
||
Supplementary Purchase Specification for |
SEPARATELY. |
||
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. |
|||
Non-Adjustability |
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range |
||
|
of tolerances established by ANSI Standard A112.19.2. |
||
|
These measurements are subject to change or cancellation. No responsibility is |
||
|
assumed for use of superseded or voided pages. |
||
|
K61 |
|
|
© 2008 AS America Inc. |
Revised 2/08 |
||
|