American Standard 4112.700, 2798.012, 4112.300, 4112.500, 4112.600 User Manual

...
0 (0)
American Standard 4112.700, 2798.012, 4112.300, 4112.500, 4112.600 User Manual

CADET™ ROUND FRONT TOILET

2798.012

Vitreous china

Low-consumption (6.0 Lpf/1.6 gpf)

Round front siphon action jetted bowl

Fully glazed 2" trapway

AquaForce flushing technology

Close-coupled tank with raised lip detail on tank cover

Color-matched trip lever

Speed Connect® tank/bowl coupling system

Sanitary bar on bowl

2 bolt caps

100% factory flush tested

3454.016 Bowl

4112.016 Tank

Nominal Dimensions:

699 x 495 x 762mm (27-1/2" x 19-1/2" x 30")

Fixture only, seat and supply by others

Alternate Tank Configurations Available:

4112.300 Tank complete with chrome all metal trip lever

4112.500 Tank complete with Aquagard Liner

4112.600 Tank complete with tank cover locking device

4112.700 Tank complete with Aquagard Liner and tank cover locking device

4112.800 Tank complete with trip lever located on right side

4112.900 Tank complete with tank cover device and trip lever located on right side

Compliance Certifications -

Meets or Exceeds the Following Specifications:

ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specified:

Color: White Bone Linen Silver

Fawn Beige Black

Seat: American Standard #5322.011 “Rise and Shine” solid plastic closed front seat with cover.

Seat: American Standard #5308.014 “Laurel” molded closed front seat with cover.

Alternate Seat:

Supply with stop:

©2008 AS America Inc.

CADET™

ROUND FRONT TOILET

VITREOUS CHINA

FINISHED WALL

 

 

 

699mm

 

 

 

(27-1/2)

 

 

19mm ± 6mm

 

495mm

(3/4 ± 1/4)

 

 

 

225mm

 

(19-1/2)

 

 

 

 

(8-7/8)

 

 

 

419mm

 

 

 

(16-1/2)

 

 

 

C/L OF SEAT POST HOLES

 

 

140mm (5-1/2 CENTERS)

 

 

 

 

762mm

 

 

SUPPLY

(30)

 

 

AS

 

83mm 1/4)-(3

 

REQ'D

 

 

381mm

 

 

 

(15)

 

 

 

*222mm(8-3/4)

381mm

 

 

(15)

 

 

152mm

 

 

16mm

(6)

 

 

(5/8)

FINISHED

 

 

 

 

178mm

305mm

FLOOR

241mm

(7)

 

(9-1/2)

(12)

 

305mm

C/L OF OUTLET

 

 

(12)

 

 

 

 

 

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K87

Revised 2/08

Loading...