American Standard 2645L - V User Manual

Size:
2.13 Mb
Download

INSTALLATION & OPERATION GUIDE FOR

EVERCLEAN/ EVOLUTION

WHIRLPOOLS AND BATHTUBS

MODEL 2422L / V

5' x 32"

MODEL 6060L / V

CORNER

MODEL 2771L / V

5' x 36"

MODEL 2645L / V

OVAL

MODEL 7236L / V

6' x 36"

MODEL 2425L / V - LHO

5' x 32" IA-LHO

MODEL 2425L / V - RHO

5' x 32" IA-RHO

MODEL 2908L

REMINISCENCE

MODEL 2711L

ELLISSE

MODEL 2773L

CADET 6' x 36"

MODEL 2774L

CADET 6' x 42"

MODEL 2775L

CADET CORNER

MODEL 2732L

5' x 32"

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the whirlpool installation are your selected fittings and electrical connections.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

FOR AFTER-SALESSERVICE CALL 1 (800)442-1902WEEKDAYS.

© AS Americas Inc. 2010

All product names listed herein are trademarks of AS Americas Inc. unless otherwise noted.

1

753737-100Rev. E

TABLE OF CONTENTS:

Safety Instructions...............................................................................

Page 3

General Information.............................................................................

Page 4

Optional Components..........................................................................

Page 4

Specifications......................................................................................

Page 5

Roughing-inReference.....................................................................

Page 6-9

Framing and Support Instructions.....................................................

Page 10

Mounting Instructions.........................................................................

Page 11

Electrical Connections.......................................................................

Page 12

6060L/V Corner EZ-InstallHeater.....................................................

Page 13

Operation.....................................................................................

Page 14-15

Drain Connection and System Test...................................................

Page 16

Care and Cleaning.............................................................................

Page 16

Warranty............................................................................................

Page 17

753737-100Rev. E

2

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS

READ AND FOLLOW ALL INSTRUCTIONS!

!WARNING: Risk of personal injury. Do not permit children to use this unit without adult supervision.

!WARNING: Risk of personal injury. Do not operate this unit without the guard over the suction fitting.

!WARNING: Risk of electric shock. Do not permit electrical appliances (hair dryer, telephone, radio, etc.) within

60 inches (1524mm) of this unit.

!WARNING: Risk of hyperthermia and possible drowning. People using medications and/or having adverse

medical history should consult a physician before using this product.

!WARNING: Risk of personal injury. Do not overfill unit before entering. Entering tub when filled more than 2/3

can cause overflow and slippery conditions. Exercise caution when entering and exiting.

!WARNING: No Food or Alcoholic Beverages. Use of your bathtub immediately after meals is not

recommended. Avoid alcohol consumption before or during bathing. Alcoholic beverages can cause drowsiness or hyperthermia resulting in loss of consciousness or even drowning.

!WARNING: Pregnancy. If you are or think you may be pregnant, consult your physician before using the bathtub.

Never drop or insert any object into any opening.

Use this unit only for its intended use as described in this manual. Do not use any attachments not recommended by American Standard.

The unit must be connected only to a supply circuit that is properly protected by a ground-faultcircuit-interrupter(GFCI). Such a GFCI should be provided by the installer and should be tested on a routine basis. To test the GFCI, push the test button. The GFCI should interrupt power. Push the reset button. Power should be restored. If the GFCI fails to operate in this manner, the GFCI is defective. If the GFCI interrupts power to the bathtub without the test button being pushed, a ground current is flowing, indicating the possibility of an electric shock. Do not use this hydromassage bathtub. Disconnect the hydromassage bathtub and have the problem corrected by a licensed electrician before using.

A pressure wire connector is provided on the exterior of the motor unit to permit connection of a no. 8 AWG solid copper bonding conductor between this unit and all other electrical equipment and exposed metal in the vicinity, as needed to comply with local requirements. To reduce the risk of an electric shock, connect this connector the grounding terminal of your electric service or supply panel with a conductor equivalent in size to the circuit conductors supplying this unit.

SAVE THESE INSTRUCTIONS

3

753737-100Rev. E

General Installation Information

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately. After inspection and during installation, protect the bath from construction damage. Before installation, and before enclosing with wallboard, tile, etc., the bath must be filled with water and operated to check for leaks that may have resulted from shipping damage or mishandling ! Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system. Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others.

For electrical requirements, refer to section titled “Whirlpool Electrical Installation Instructions”.

Check for availability of optional American Standard wall tiling bead (required for recess installation). Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

! WARNING: Do not lift whirlpool by the piping harness at any time.

List of Required Tools and Supplies:

Tools

Supplies

Level

Nails

• Tape Measure

Putty

Pipe Wrench

Caulking (waterproof)

Slip Joint Pliers

1 x 4 Stringers

Screw Driver

Drop Cloth

Standard Woodworking Tools

Cement, Plaster, Grout

Personal Safety Equipment

Caulking Gun

LIST OF OPTIONAL COMPONENTS (NOT INCLUDED):

 

 

Required Components

Optional Components

 

 

(Not Included)

(Not Included)

 

Description

Model

Drain

 

Drain

E-Z

 

Apron

 

Tile

 

 

 

 

Number

(White)

 

(Specify

Install

 

 

Bead

 

 

 

Kit

 

 

 

 

 

Finish)

Heater

 

 

Kit

 

 

 

 

 

 

 

Everclean/EvolutionCorner

6060

1599.500.020

 

1583.470.XXX

INCLUDED

 

NOT

 

 

 

 

 

 

 

 

AVAILABLE

 

 

Everclean/Evolution5' x 32"

2422

1599.500.020*

 

1599.205.XXX*

 

9261.019

 

Everclean/Evolution5' x 36"

2771

1599.500.020*

 

1599.205.XXX*

 

9261.019

 

Everclean/Evolution6' x 36"

7236

1599.500.020*

 

1599.205.XXX*

 

9271.019

 

Everclean/Evolution5' x 32" IA

2425

1599.500.020*

 

1599.205.XXX*

 

INTEGRAL

 

N/A

Everclean/EvolutionOval

2645

1599.500.020

 

1583.470.XXX

 

9266.018

 

EvercleanReminiscence

2908

1599.500.020

 

1583.470.XXX

 

NOT

 

N/A

 

 

 

 

 

 

 

AVAILABLE

 

 

EvercleanEllisse

2711

1599.500.020

 

1583.470.XXX

 

NOT

 

 

 

AVAILABLE

 

EvercleanCadet 6' x 36"

2773

1599.500.020

 

1583.470.XXX

 

9272.018

 

EvercleanCadet 6' x 42"

2774

1599.500.020

 

1583.470.XXX

 

9272.018

 

EvercleanCadet Corner

2775

1599.500.020

 

1583.470.XXX

 

NOT

 

 

 

AVAILABLE

 

Everclean5' x 32"

2732

1599.500.020

 

1583.470.XXX

 

5FT-

 

 

 

APRON

 

• For these components please see your Vendor.

* These models require American Standard Lifetime™ Drain 1599.205 or 1599.500

753737-100Rev. E

4

SPECIFICATIONS:

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

W

 

 

 

 

 

 

 

 

 

 

J

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H

 

 

 

 

 

 

 

 

 

 

 

 

 

C

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SIDE VIEW

 

 

 

 

 

 

 

 

 

 

 

END VIEW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DRAIN / OVERFLOW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GENERAL SPECIFICATIONS FOR LIFETIME / EVOLUTION WHIRLPOOLS AND BATH TUBS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description

Dimensions

Drain /

 

Height to

Cut Out

 

Rough-In

 

Tub Edge to

 

Weight with

Product

 

Apron /

Heater Ready

Gallon to

Whirlpool

 

 

 

 

 

L-W-H

Overflow

Underside

Pier

 

Recess

 

Centerline

Water / Floor

Weight

Mounting

 

for Field

Overflow

Operating

 

 

 

 

 

 

 

 

 

of Deck: C

G x F

 

E x D

 

Overflow: J

 

 

 

Loading

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation

 

Volume

6060L / V

L 1949mm (76-3/4")

A 18"

 

C 19-1/2"

Template

 

Template

5-5/8"

824 lb. (374 kg)/

108 lb.

 

 

 

N/A

 

Included

86 gal.

71 gal.

Corner*

W 1661mm (65-3/8")

(457mm)

 

(495mm)

Provided

 

751627-400

 

(130mm)

25 lb./sq.ft.

(49 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(325 l.)

(269 l.)

 

 

 

 

 

H 546mm (21-1/2")

B 13-3/4"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(117 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(349mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2422L / V

L 1524mm (60")

A 20-1/8"

 

C 20"

58-1/2"

 

 

 

 

60-3/16"

 

3-1/4"

690 lb. (313 kg)/

74 lb.

 

Optional

 

Optional

74 gal.

33 gal.

5' x 32"

W 813mm (32")

(511mm)

 

(508mm)

(1485mm)

 

(1528mm)

 

 

 

(83mm)

53 lb./sq.ft.

(34 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(280 l.)

(125 l.)

 

 

 

 

 

H 546mm (21-1/2")

B 11"

 

 

 

 

x 30-1/2"

 

x 30-1/2"

 

 

 

 

 

 

(260 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(279mm)

 

 

 

 

(774mm)

 

(774mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2771L / V

L 1524mm (60")

A 20-1/8"

 

C 20"

58-1/2"

 

 

 

 

60-3/16"

 

3-1/4"

800 lb. (363 kg)/

75 lb.

 

Optional

 

Optional

87 gal.

50 gal.

5' x 36"

W 914mm (36")

(511mm)

 

(508mm)

(1485mm)

 

(1528mm)

 

 

 

(83mm)

53 lb./sq.ft.

(34 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(329 l.)

(189 l.)

 

 

 

 

 

H 546mm (21-1/2")

B 11"

 

 

 

 

x 34-1/2"

 

x 34-1/2"

 

 

 

 

 

 

(260 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(279mm)

 

 

 

 

(876mm)

 

(876mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7236L / V

L 1829mm (72")

A 20-1/8"

 

C 20"

70-1/2"

 

 

 

 

72-3/16"

 

3-1/4"

1031 lb. (467 kg)/

106 lb.

 

Optional

 

Optional

111 gal.

53 gal.

6' x 36"

W 914mm (36")

(511mm)

 

(508mm)

(1790mm)

 

(1833mm)

 

 

 

(83mm)

57 lb./sq.ft.

(48 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(420 l.)

(201 l.)

 

 

 

 

 

H 546mm (21-1/2")

B 11"

 

 

 

 

x 34-1/2"

 

x 34-1/2"

 

 

 

 

 

 

(280 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(279mm)

 

 

 

 

(876mm)

 

(876mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2425L / V

L 1524mm (60")

A 19-1/8"

 

C 20-1/4"

N/A

 

60-3/16"

 

2-7/8"

675 lb. (306 kg)/

92 lb.

 

Included

 

Optional

70 gal.

39 gal.

5' x 32”

W 813mm (32")

(485mm)

 

(515mm)

 

 

 

 

 

 

(1528mm)

 

 

 

(73mm)

54 lb./sq.ft.

(42 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(265 l.)

(148 l.)

LHO /

H 521mm (20-1/2")

B 10-1/2"

 

 

 

 

 

 

 

 

 

 

x 30-1/2"

 

 

 

 

 

 

(262 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RHO

 

 

 

(266mm)

 

 

 

 

 

 

 

 

 

 

(774mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2645L / V

L 1676mm (66")

A 15-1/4"

 

C 18-1/4"

64"

 

 

 

 

 

66-3/16"

 

1-3/4"

580 lb. (263 kg)/

96 lb.

 

Optional

 

Optional

58 gal.

42 gal.

Oval

W 914mm (36")

(387mm)

 

(464mm)

(1625mm)

 

(1681mm)

 

 

 

(44mm)

36 lb./pies

(44 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(219 l.)

(159 l.)

 

 

 

 

 

H 502mm (19-3/4")

B 8-1/4"

 

 

 

 

x 34"

 

x 34-1/2"

 

 

 

 

 

 

cuadrados

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(209mm)

 

 

 

 

(863mm)

 

(876mm)

 

 

 

 

 

 

(175 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2908L

L 1676mm (66")

A 15-1/8"

 

C 18-1/4"

Template

 

Template

6"

 

659 lb. (299 kg)/

95 lb.

 

 

 

N/A

 

Optional

68 gal.

55 gal.

Reminiscence

W 914mm (36")

(384mm)

 

(464mm)

Provided

 

752540-400

 

(152mm)

40 lb./sq.ft.

(43 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(257 l.)

(208 l.)

 

 

 

 

 

H 616mm (24-1/4")

B 13"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(191 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(330mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2711L

L 1829mm (72")

A 17-3/8"

 

C 19-1/2"

70-1/2"

 

 

 

 

72-3/16"

 

4"

 

965 lb. (434 kg)/

148 lb.

 

 

 

N/A

 

Optional

95 gal.

74 gal.

Ellisse

W 1219mm (48")

(441mm)

 

(495mm)

(1791mm)

 

(1833mm)

 

(102mm)

40 lb./sq.ft.

(67 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(360 l.)

(280 l.)

 

 

 

 

 

H 546mm (21-1/2")

B 12"

 

 

 

 

x 46-1/2"

 

x 48"

 

 

 

 

 

 

(195 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(305mm)

 

 

 

 

(1181mm)

 

(1219mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2773L

L 1829mm (72")

A 17"

 

C 18-1/4"

70-1/2"

 

 

 

 

72-3/16"

 

2-1/4"

751 lb. (341 kg)/

101 lb.

 

Optional

 

Optional

78 gal.

64 gal.

Cadet 6' x 36"

W 914mm (36")

(432mm)

 

(464mm)

(1791mm)

 

(1833mm)

 

 

 

(57mm)

40 lb./sq.ft.

(45 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(296 l.)

(243 l.)

 

 

 

 

 

H 502mm (19-3/4")

B 12"

 

 

 

 

x 34-1/4"

 

x 36"

 

 

 

 

 

 

(190 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(305mm)

 

 

 

 

(870mm)

 

(914mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2774L

L 1829mm (72")

A 16-1/4"

 

C 18-1/4"

70-1/2"

 

 

 

 

72-3/16"

 

2-1/4"

821 lb. (372 kg)/

137 lb.

 

Optional

 

Optional

82 gal.

66 gal.

Cadet 6' x 42"

W 1067mm (42")

(413mm)

 

(464mm)

(1791mm)

 

(1833mm)

 

 

 

(57mm)

42 lb./sq.ft.

(62 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(310 l.)

(256 l.)

 

 

 

 

 

H 502mm (19-3/4")

B 12"

 

 

 

 

x 40-1/2"

 

x 42"

 

 

 

 

 

 

(203 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(305mm)

 

 

 

 

(1029mm)

 

(1067mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2775L

L 2159mm (85")

A 16-1/2"

 

C 18-1/4"

Template

 

Template

11"

 

756 lb. (343 kg)/

130 lb.

 

 

 

N/A

 

Optional

75 gal.

60 gal.

Cadet Corner

W 1524mm (60")

(419mm)

 

(464mm)

Provided

 

752539-400

 

(279mm)

34 lb./sq.ft.

(59 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(284 l.)

(272 l.)

 

 

 

 

 

H 502mm (19-3/4")

B 11"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(115 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(279mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2732L

L 1524mm (60")

A 17-1/4"

 

C 18-1/4"

58-1/2"

 

 

 

 

60-3/16"

 

2-5/8"

524 lb. (237 kg)/

65 lb.

 

Optional

 

Optional

55 gal.

47 gal.

5' x 32"

W 832mm (32-3/4")

(438mm)

 

(464mm)

(1485mm)

 

(1529mm)

 

 

 

(67mm)

43 lb./sq.ft.

(30 kg.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(208 l.)

(155 l.)

 

 

 

 

 

H 502mm (19-3/4")

B 8-1/2"

 

 

 

 

x 31-1/4"

 

x 31-1/4"

 

 

 

 

 

 

(213 kg/sq.m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(216mm)

 

 

 

 

(794mm)

 

(794mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TABLE 1

5

753737-100Rev. E

ROUGHING-INREFERENCES

5' x 32" (MODEL 2422L / V)

60"

 

 

 

(1524mm)

 

 

 

 

13-3/4"

 

3"

(349mm)

 

(76mm)

 

 

 

 

6"

 

32"

(152mm)

 

(813mm)

CUT OUT IN FLOOR

7-3/4"

 

FOR DRAIN

 

 

 

(197mm)

 

PROVIDE

 

 

 

ACCESS TO

 

 

 

PUMP FOR

 

 

3-1/4"

SERVICING

 

11"

ON ALL

 

(83mm)

INSTALLATIONS

 

(279mm)

 

6' x 36" (MODEL 7236L / V)

 

72"

 

 

 

(1829mm)

 

11"

 

 

 

 

 

 

 

 

(279mm)

3-1/4"

 

 

 

 

 

 

 

 

(83mm)

 

 

13-3/4"

 

 

3"

7-3/4"

(349mm)

 

 

(197mm)

 

 

36"

(76mm)

 

 

 

 

 

6"

 

(914mm)

 

 

 

 

 

(152mm)

 

 

CUT OUT IN FLOOR

 

 

 

FOR DRAIN

 

 

PROVIDE

ACCESS TO

PUMP FOR

SERVICING

ON ALL

INSTALLATIONS

5' x 36" (MODEL 2771L / V)

60"

(1524mm)

11"

(279mm)

3-1/4"(83mm)

CUT OUT IN FLOOR FOR DRAIN 3"

(76mm)

6"

36"

(152mm)

(914mm)

7-1/2"(191mm)

13-3/4"(349mm)

PROVIDE

ACCESS TO

PUMP FOR

SERVICING

ON ALL

INSTALLATIONS

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE

OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

753737-100Rev. E

6

ROUGHING-INREFERENCES

OVAL (MODEL 2645L / V)

66"

 

 

(1676mm)

11-1/4"

 

 

 

 

(286mm)

1-3/4"

 

 

 

 

(44mm)

18"

 

 

(457mm)

 

 

6"

 

36"

 

(914mm)

(152mm)

 

 

CUT OUT IN FLOOR

 

 

FOR DRAIN

 

 

PROVIDE

3"

 

ACCESS TO

 

(76mm)

 

PUMP FOR

 

5-3/8"

 

SERVICING

8-1/4"

(137mm)

ON ALL

 

(210mm)

INSTALLATIONS

 

 

 

5' x 32" IA-RHO(MODEL2425L/V-RHO)- shown 5' x 32"IA-LHO(MODEL2425L/V-LHO)

60"

(1524mm)

10-1/2"(267mm)

3" 7-1/2"(76mm) (191mm)

PROVIDE ACCESS

6"

TO PUMP FOR

SERVICING ON ALL

(152mm)

INSTALLATIONS

 

 

CUT OUT IN FLOOR

 

FOR DRAIN

 

CORNER (MODEL 6060L / V)

13-1/2"

 

 

 

 

 

 

76-3/4"

 

(343mm)

 

 

(1949mm)

 

 

 

 

 

54-1/2"

65-3/8"

 

 

 

(1384mm)

(1661mm)

 

 

 

 

PROVIDE ACCESS

 

 

 

 

TO PUMP FOR

 

 

 

 

SERVICING ON ALL

 

 

 

 

INSTALLATIONS

 

 

10"

 

3"

 

 

 

(76mm)

 

 

(254mm)

 

 

15"

 

 

 

17-3/4"

(381mm)

 

 

 

 

 

 

7"

(451mm)

 

 

 

(178mm)

5-5/8"

7" (178mm)

CUT OUT

13-3/4"(349mm)

(143mm)

 

IN FLOOR FOR DRAIN

 

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE

OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

2-7/8"(73mm)

16"

(406mm)

32"

(813mm)

7

753737-100Rev. E

ROUGHING-INREFERENCES

CADET CORNER (MODEL 2775L)

524mm

 

 

)

 

"

1

(60

 

165mm (6-1/2)

RECOMMENDED

FITTING

LOCATION

64 X 330mm

(2-1/2X 13")

OUTLINE OF

CUTOUT

1080 mm

C/L

(42-1/2")

2159mm

(85")

1080mm

229 X 305mm

 

 

 

 

(9" X 12")

 

 

 

 

(42-1/2")

CUTOUT IN

 

 

 

 

 

FLOOR FOR

 

 

 

 

 

DRAIN

1076mm

 

 

 

 

 

 

 

 

 

 

(42-3/8")

 

 

 

 

 

1524mm

 

 

 

 

 

(60")

 

 

 

70mm REF.

 

 

 

 

 

(2-3/4)

 

 

 

 

 

 

PROVIDE ACCESS TO

 

 

 

 

 

PUMP FOR

 

 

 

 

SERVICING ON ALL

 

 

 

 

PUMP

INSTALLATIONS

 

 

 

 

 

 

 

 

279mm

 

 

 

 

 

(11")

 

 

 

 

 

C/L OF DRAIN OUTLET

ELLISSE (MODEL 2711L)

 

 

 

 

 

 

 

1829mm

 

 

 

 

(36-1/2")

(72")

OUTLINE OF CUTOUT

102mm

 

 

 

 

 

927mm

 

 

 

 

1791 X 1181

(4")

 

 

 

 

(70-1/2"X46-1/2")

 

 

305mm

 

 

 

 

 

(12")

 

 

 

 

 

 

 

 

 

C/L OF

 

 

 

 

 

DRAIN

 

 

 

 

229mm x 356mm

 

 

1219mm

 

 

(9" x 14") FLOOR

PUMP

 

(48")

 

 

CUTOUT

 

 

 

 

RECOMMENDED

OPTIONAL DECK

PROVIDE ACCESS TO

FITTING LOCATION

FITTING AREA

PUMP FOR SERVICE

64 X 279mm (2-1/2"X 11")

 

ON ALL INSTALLATIONS

 

REMINISCENCE (MODEL 2908L)

 

 

1676mm

 

330mm

 

(66")

 

(13")

 

 

 

 

 

 

PUMP

914mm

 

 

 

(36")

229 x 305mm

 

 

 

 

 

457mm

(9 X 12)

 

 

(18)

FLOOR

 

 

 

CUTOUT

 

 

INTEGRAL

64mm REF.

 

 

FITTING

(2-1/2)

 

 

DECK

 

 

 

152mm

OUTLINE OF

PROVIDE ACCESS TO

(6)

PUMP FOR SERVICE

C/L OF DRAIN

CUTOUT

 

ON ALL INSTALLATIONS

 

OUTLET

 

 

 

 

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY

ANSI STANDARDS Z124.1 AND A112.19.7.

753737-100Rev. E

8

ROUGHING-INREFERENCES

CADET 6' x 42" (MODEL 2774L)

 

 

 

1829mm

 

 

305mm

 

(72")

 

 

RECOMMENDED FITTING LOCATION

 

229mm

(12")

 

 

 

64 X 330mm (2-1/2"x 13")

 

(9") 19mm

 

 

 

 

 

 

FOR PIER OR ISLAND

 

(3/4")

 

 

 

INSTALLATIONS ONLY

 

FINISHED

 

 

 

 

 

WALL

 

 

 

 

 

 

 

 

 

 

PROVIDE

 

 

 

 

 

ACCESS TO

 

 

229mm

 

 

PUMP FOR

 

 

(9")

 

 

SERVICING

 

 

 

 

ON ALL

 

 

 

 

 

1067mm

 

 

 

 

INSTALLATIONS

 

 

 

PUMP

 

(42")

 

CUTOUT IN FLOOR

 

533mm

 

 

 

 

FOR DRAIN

 

 

 

(21")

 

 

 

 

 

 

 

 

 

 

57mm

 

 

(2) AIR VALVES

OUTLINE OF

 

(2-1/4")

(8) JETS

 

ALT. FITTING

CUTOUT

 

 

1791mm x 1029mm

 

 

 

 

 

 

 

 

LOCATION #1

 

C/L OF DRAIN

 

(70-1/2"X40-1/2")

 

 

 

 

 

 

 

PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS

 

 

CADET 6' x 36" (MODEL 2773L)

 

 

1829mm

229mm

305mm

(72")

 

(9")

(12")

RECOMMENDED FITTING LOCATION

 

 

64 X 330mm (2-1/2"x 13")

19mm

 

FOR PIER OR ISLAND

(3/4")

 

INSTALLATIONS ONLY

FINISHED

 

 

WALL

 

 

908mm

 

(35-3/4")

 

 

229mm

 

(9")

454mm

CUTOUT IN FLOOR

FOR DRAIN

(17-7/8")

 

57mm

 

(2-1/4")

(8) JETS

C/L OF DRAIN

5' x 32" (MODEL 2732L)

60"

(1524mm)

12"

(305mm)

 

16-1/2"

3"

(419mm)

 

(76mm)

 

6"

 

(152mm)

 

CUT OUT IN FLOOR

32-3/4"

FOR DRAIN

(832mm)

5-7/8"

 

 

 

 

 

 

(149mm)

 

 

 

8-1/2"

 

 

 

 

 

 

 

 

(216mm)

PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS

PUMP

(2) AIR VALVES

OUTLINE

ALT. FITTING

OF CUTOUT

1791mm x 870mm

LOCATION #1

(70-1/2"X34-1/4")

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY

ANSI STANDARDS Z124.1 AND A112.19.7.

9

753737-100Rev. E

INSTALLATION AND FRAMING INSTRUCTIONS

The variety of installations possible for this whirlpool may require framing procedures other than those shown. Locate studs as needed. Ensure roughing-indimensions are proper, plumb and square. Provisions must be made in all installations for an access opening for servicing the pump and controls. It is strongly recommended that an additional opening be provided for access to the drain components. The apron should not be used as the primary access opening.

1.Position the whirlpool into the installation opening and level the deck in both directions, shimming the integral support feet IF necessary. Mark the final position of the underside of the deck by tracing a line on to the studs (see Figure 1).

2.Remove the whirlpool and attach a 1 x 4 stringer to the studs, with the top of the stringer touching the traced line.

!The rim of the bath must not support weight.

3.Install drain components to the whirlpool following the drain installation instructions. Before replacing your whirlpool for final installation, be certain that an opening has been provided in the sub-floorfor the drain. See theroughing-indrawing and Table 1 for suggested opening size (shadowed) and location dimensions. The drain/overflow of the bath extends below the bottom of the bath. Note that this requires a cutout in the floor.

!

The floor structure beneath the bath must be able to support a total weight of bath, water, and

bather. Refer to Table 1 under total weight for your model.

 

For Models: 2425L/V-LHOand2425L/V-RHO,2732L;

This bath must be supported along its entire bottom. Use mortar as bedding material (do not use sand or foam). Apply enough mortar to support the complete bottom of the bath. After the mortar has been poured, and before it sets, position whirlpool or bath within recess until the rim is leveled against the leveling stringers (see "Typical Recess Installation") shown below.

!The rim of the bath must not support weight. Allow the mortar material to completely harden before applying weight to the rim or bottom of the bath. Any finish material such as tile or wall board must beself-supportingif it contacts the deck of the bath.

For Models: 2645L/V, 2771L/V, 2773L/V, 2774L/V, 2775L/V, 2422L/V, 2711L/V, 2908L/V, 6060L/V and 7236L/V;

Replace whirlpool and re-shimthe integral support feet, shimming the entire length of the support feet. Secure the shims using construction adhesive, silicone, mortar or equivalent materials. While not a necessity, the use of a foundation base consisting of cement, mortar, or grout will help provide a solid and secure installation.

!The rim of the bath must not support weight. If foundation base is used, allow the bedding material to completely harden before applying weight to the rim or bottom of the bath. Any finish material such as tile or wall board must beself-supportingif it contacts the deck of the bath.

FIGURE 1

TYPICAL INSTALLATION

C

 

TILE

 

WALLBOARD

TILE

SEALANT

BATH

BEAD

 

STRIP

 

 

ADHESIVE

 

LEVELING STRINGER

 

1 x 4 (not for support)

NOTE: Tile bead kit not included and must be purchased separately.

TYPICAL RECESS INSTALLATION

C

E

NOTE:

FRONT EDGE

OF BATH MUST

BE SUPPORTED BY STUD WALL OR

AMERICAN STANDARD APRON KIT

D

12

 

W

(305 mm)

LEVELING

STRINGERS

ACCESS PANEL MUST BE LOCATED

ON THE SAME SIDE AS THE MOTOR.

ALLOW OPEN FRAMING ON

PUMP/MOTOR END FOR SERVICE.

ACCESS PANELS NOT REQUIRED

FOR BATH TUBS.

UNLESS AN ACCESS OPENING OF AT LEAST 12" X 24" (305 X 610mm) IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED.

(EXCEPT 2425 WHERE APRON IS PRIMARY ACCESS OPENING)

FOR E & D DIMENSIONS SEE TABLE 1 ON PAGE 5.

TYPICAL PIER TYPE INSTALLATION

AS DESIRED

F CUTOUT

C

AS DESIRED

MOUNTING

SURFACE

WATERPROOF SEALANT

BATH

G

CUTOUT

12

(305 mm)

24

(610 mm)

ACCESS PANEL MUST BE LOCATED ON THE SAME SIDE AS THE MOTOR.

ALLOW OPEN FRAMING ON PUMP/MOTOR END FOR SERVICE.

ACCESS PANELS NOT REQUIRED FOR BATH TUBS.

UNLESS AN ACCESS OPENING OF AT LEAST 12" X 24" (305 X 610mm) IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED.

FOR G & F DIMENSIONS SEE TABLE 1 ON PAGE 5.

753737-100Rev. E

10