American Standard 211CA User Manual

Size:
392.46 Kb
Download

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

Champion® PRO2-pieceToilet

211AA Series Right Height® Elongated

211BA Series Right Height® Round Front

211CA Series Elongated

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years.To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.

!CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly define contour of china and components.

TANK 4225A

 

 

 

EZ-INSTALLKIT INCLUDED WITH TANK

E

S

 

 

 

 

 

 

U

 

 

 

E

 

 

 

R

Tank To Bowl Gasket

Attachment Handles

Plastic Washers (2)

U

 

with Nuts (2)

 

 

 

 

 

 

 

T

BOWL 3195A RIGHT HEIGHT® ELONGATED

 

 

U

 

 

F

BOWL 3195B RIGHT HEIGHT® ROUND FRONT

 

 

 

 

 

BOWL 3195C ELONGATED

 

 

R

 

 

 

 

 

 

O

EZ-INSTALLKIT INCLUDED WITH BOWL

F

 

S A V E

T-Boltswith Retainer (2)

Bolt Caps (2)

Bowl-To-FloorKnobs (2)

SOLD SEPARATELY

Wax Ring

Water Supply Line

Slow Close Toilet Seat

 

 

P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A S A m e r i c a , I n c .

7301836-100Rev. B

© A S A m e r i c a , I n c . 2 01 2

 

ROUGHING-IN DIMENSIONS: NOTE: Distance from wall to closet flange centerline must be as listed below:A = 12" (305mm)

 

 

 

Champion® PRO2-pieceToilet 211BA Series Right Height® Round Front/

 

 

 

 

 

 

 

Champion® PRO2-pieceToilet 211AA Series Right Height® Elongated

 

 

Champion® PRO2-pieceToilet 211CA Series Normal Height Elongated

 

 

FINISHED WALL

30-1/4"

 

 

 

 

 

 

 

 

 

(768mm)

 

 

 

 

 

 

 

 

 

28-1/4"

 

 

 

FINISHED WALL

 

 

 

 

 

(718mm)

19"

 

 

30-1/4"

19"

 

 

 

 

 

 

1"

(26mm)

 

9" (230mm)

(483mm)

1"

(26mm)

9"

(768mm)

(483mm)

 

18-1/2"

 

(230mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(470mm)

 

 

 

 

18-1/2"

 

 

 

 

16-1/2"

 

 

 

 

 

 

 

 

 

 

 

 

(470mm)

 

 

 

 

(419mm)

 

 

 

 

14"

 

 

 

14"

 

 

 

 

 

 

 

C/L OF SEAT POST HOLES

 

 

 

C/L OF SEAT POST HOLES

 

 

 

(356mm)

 

 

 

(356mm)

 

 

 

5-1/2"(140mm CENTERS)

 

 

 

 

5-1/2"(140mm CENTERS)

 

9/16"-3

(90mm)

SUPPLY

 

AS

30-7/8"

 

 

REQ'D

(785mm)

 

 

16-1/2"

 

 

 

(419mm)

 

 

 

*10"

 

 

 

(254mm)

 

9-3/8"

13-7/16"

FINISHED

6"

(238mm)

(341mm)

FLOOR

(152mm)

12"

13-13/16"

 

10-1/2"

(305mm)

(351mm)

 

(267mm)

 

C/L OF OUTLET

 

 

9/16"-3

(90mm)

SUPPLY

 

AS

29-3/8"

 

 

REQ'D

(747mm)

 

 

15"

 

 

 

(381mm)

 

 

 

*10"

 

 

 

(254mm)

 

9-3/8"

13-13/16"

FINISHED

6"

(238mm)

(351mm)

FLOOR

(152mm)

12"

C/L OF OUTLET

 

10-1/2"

(305mm)

 

(267mm)

Before You Start:

If Removing An Existing Toilet

 

Turn Off Water Supply

Clean Flange

 

Flush to remove

 

water from tank;

 

sponge remaining

 

water from

 

bowl before

 

removing toilet.

 

! Caution: If leaving floor flange

 

open for more than 1-2hours,

 

cover flange to prevent escaping

 

sewer gases.

Recommended fitting type for back-to-backinstallations.

BACK-TO-BACKINSTALLATION

Depending upon your plumbing and venting conditions, the flow from the Champion® PRO in aback-to-backinstallation may create a vacuum on the system and draw water from the opposing bowl. The National Standards Plumbing Code prohibits the use of a cross fitting for drainage as throw over is possible. The code does approve a directional "Y" style fitting with proper venting to direct the water downward and away from the other toilet.

1

2 Press firmly.

Wax Ring

(sold separately)

- 2 -

7301836-100Rev. B

3

4

Apply weight evenly.

Hand tighten

Do not move after

! only. Do not

placement. Water

overtighten.

tight seal may break.

 

5

6

Tighten handles alternately until the tank contacts the front and back of the bowl achievingchina-to-chinacontact.

NOTE: To ease installation, push down on the top of the tank while tightening handles.

7

 

 

 

 

 

 

!

WARNING: Overtightening

of

A

water

supply line nuts could

 

 

result in breakage and potential

Connect water

 

 

flooding. If the connection leaks

supply line.

 

(Sold separately)

 

after hand tightening,

replace

Hand tighten nut.

 

the supply line. Do not use any

 

 

type of sealant on the water

 

 

supply

connection.

Use

of

 

 

plumber’s putty, pipe dope, or

 

 

any other type of sealant will

 

 

void the warranty.

 

 

B

 

 

 

 

 

Turn on water supply.

 

 

 

 

 

- 3 -

 

 

 

7301836-100Rev. B

8

Water Level

Trip Lever Rod

 

Adjustment Knob

 

 

A

Refill Tube

 

Adjust water level to level

 

 

indicated on tank by turning

Approximate

 

water level adjustment knob

 

Water Level

 

to move float cup up or down.

 

 

 

Float Cup

Flush Valve Chain

 

Fill Valve

Flapper

 

Or Water

Flapper

Flush

Control

 

Seal

Valve

B

Overflow

 

 

Tube

 

REPAIR PARTS LABEL LOCATED UNDER TANK LID.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water Supply Line

 

 

 

Tank to Bowl Gasket

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CARE AND CLEANING

When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth.

WARNING: Do not usein-tankcleaners. These products can seriously corrode fittings in the tank. This damage can cause leakage and property damage. American Standard shall not be responsible or liable for any damage caused by the use ofin-tankcleaners.

TROUBLESHOOTING GUIDE - See Step 8 For Diagram

Problem

 

Possible Cause

 

Corrective Action

 

 

 

 

 

 

 

 

 

Does not flush

 

a.

Water supply valve closed.

 

a.

Open valve and allow water to fill tank.

 

 

 

b.

Supply line blocked.

 

b. Shut off water supply, disconnect supply line and inspect all gaskets and washers. Reassemble.

 

 

c.

Flush valve chain too loose or disconnected.

 

c.

Readjust chain length as required.

 

 

 

d.

Sand or debris lodged in water control.

 

d.

Shut off water supply. Remove cap and clean as per Fluidmaster maintenance instructions at:

 

 

 

 

 

 

www.americanstandard-us.com/enews/fluidmasterguide.pdf

 

 

 

 

 

 

 

Poor or

 

a.

Bowl water level too low.

 

a.

Check that refill tube is connected to water control and inserted into overflow tube without being

sluggish flush

 

 

 

 

 

kinked or damaged.

 

 

 

b. Supply valve partly closed.

 

b. Open supply valve fully. Be sure that proper supply tube size is used.

 

 

c.

Partially clogged trapway and/or drain pipe and/or vent.

 

c.

Remove obstruction. Consult a plumber if necessary.

 

 

d.

Supply pressure too low.

 

d.

Normal supply pressure must be at least 20 psi.

 

 

 

 

 

 

 

 

 

Toilet leaks

 

a.

Poor supply line connection.

 

a.

Review Step 7 of installation procedure.

 

 

 

b. Poor bowl to tank/floor connection.

 

b. Review Step 1 through 6 of installation procedure.

 

 

 

 

 

 

 

Toilet does not

 

a.

Flapper seal leaking or deformed.

 

a.

Clean debris from seal surface. Replace flapper seal as needed. See web for more info.

shut off

 

b.

Sand or debris lodged in water control.

 

b. Shut off water supply. Remove cap and clean as per Fluidmaster maintenance instructions at:

 

 

 

 

 

 

www.americanstandard-us.com/enews/fluidmasterguide.pdf

 

 

c.

Flush valve chain too tight, holding flapper open.

 

c.

Readjust chain length as needed.

 

 

 

 

 

 

 

 

 

Toilet bowl

 

a.

Wax ring not fully compressed.

 

a.

Retighten bowl-to-floorknobs.

 

rocks after

 

b.

Floor not level.

 

b.

Use toilet shims and /or place a bead of caulk around the base of the toilet.

installation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FOR REPAIR PARTS LIST, SEE LABEL UNDER TANK LID.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In the United States:

 

 

In Canada:

In Mexico:

 

American Standard Brands

 

AS Canada, ULC

American Standard B&K Mexico

 

 

 

P.O. Box 6820

 

5900 Avebury Rd.

S. de R.L. de C.V.

Piscataway, New Jersey 08855

 

Mississauga, Ontario

Via Morelos #330

Attention: Director of Customer Care

 

Canada L5R 3M3

Col. Santa Clara

For residents of the United States, warranty

Toll Free: (800) 387-0369

Ecatepec 55540 Edo. Mexico

information may also be obtained by calling

www.americanstandard.ca

Toll Free: 01-800-839-1200

the following toll free number: (800) 442-1902

 

 

 

www.americanstandard.com.mx

 

www.americanstandard.com

 

 

 

 

 

 

 

 

 

 

 

 

- 4 -

7301836-100Rev. B