|
Installation |
|
|
GREEN TEA |
Instructions |
|
|
|
7010.180 |
|
|
18"TOWEL BAR |
|
7010.240 |
|
24"TOWEL BAR |
|
7010.024 |
|
GLASS SHELF |
|
|
|
Thank you for selecting American-Standard...the benchmark |
|
||
of fine quality for over 100 years. |
|
|
|
To ensure that your installation proceeds smoothly--please Certified to comply with ANSI A112.18.1 |
|
||
read instructions carefully before you begin. |
|
M968631 |
|
Recommended Tools |
|
|
|
10' |
|
Regular Screwdriver |
Phillips Screwdriver |
|
|
|
|
|
|
Drill |
|
Tape Measure |
Level |
|
|
|
|
|
1MOUNTING BRACKET INSTALLATION
18" TOWEL BAR, 24" TOWEL BAR AND 24" GLASS SHELF
The 18" TOWEL BAR, 24" TOWEL BAR and GLASS SHELF work best if secured to a wall stud or cross brace within the wall, using 1-1/2" long SCREWS (3) not supplioed.
If the 18" TOWEL BAR, 24" TOWEL BAR and GLASS SHELF are to be installed on a tile or plaster wall the ANCHORS and SCREWS should be used.
Determine desired height and location (optional) for the accessory and mark a center line. Use the full size template supplied to mark hole locations for the mounting brackets. For the 24" TOWEL BAR and GLASS SHELF use 24” template. For 18” TOWEL BAR use 18” template. If MOUNTING BRACKET (1) is secured to a stud or cross brace drill small pilot holes for SCREWS (3).
For installations on drywall or tiled walls, use ANCHORS (4) and SCREWS (2) for securing MOUNTING BRACKETS (1) to wall. Use MOUNTING BRACKET (1) as a template and mark the mounting holes. Drill three 1/8" diameter holes a minimum of 1-1/4" deep. Insert the three ANCHORS (4) flush with face of the finished wall.
Secure MOUNTING PLATES (1) to wall with SCREWS (2).
2 |
|
1a |
INSTALL 18" TOWEL BAR, AND 24" TOWEL BAR |
5a |
|
|
|
Place right ESCUTCHEON (5) onto MOUNTING BRACKET (1), and secure with SET SCREW (6) using 2.5 mm HEX WRENCH (7) supplied.
18" (457mm) or
24" (610mm)
LINE
Place LEFT ESCUTCHEON (5a) onto MOUNTING BRACKET (1a) and |
1 |
secure with SET SCREW (6) using 2.5 mm HEX WRENCH (7) supplied. |
|
|
|
7010.024 |
24" (610mm) 7010.240 |
|
|
|
|
GLASS SHELF |
24" TOWEL BAR |
|
|
|
18" (457mm) |
|
|
|
|
|
|
7010.180 |
|
|
|
|
|
18" TOWEL BAR |
|
|
MOUNTING BRACKET |
MOUNTING |
|
|
FINISHED WALL |
MOUNTING BRACKET |
for GLASS SHELVE |
|
|
|
for GLASS SHELVE |
|
BRACKET |
|
|
|
||
|
|
CENTER |
|
|
|
|
|
LINE |
|
|
|
|
|
DRILL 3 PILOT HOLES FOR |
|
|
|
MOUNTING |
ANCHORS |
WOOD SCREWS (2) OR |
|
|
|
SCREWS |
1/8" DIA. HOLES FOR |
TEMPLATE |
|
|
|
(SUPPLIED) |
|
ANCHORS (4) |
|
|
|
|
|
|
|
|
|
5 |
CENTER LINE |
6 |
(OPTIONAL TO |
|
FINISHED FLOOR)
7
1-1/2"
1
2 |
3 |
|
|
POSITION OF |
2 |
|
|
MOUNTING BRACKET |
1 |
5, 5a |
|
FOR TOWEL BARS |
||
|
|
4 |
|
|
CENTER |
|
|
|
LINE |
|
|
|
DRILL 3 PILOT HOLES FOR |
6 |
|
4 |
WOOD SCREWS (2) OR |
FINISHED WALL |
|
1/8" DIA. HOLES FOR |
|
||
|
|
ANCHORS (4)