American Standard 0914.039 User Manual

Size:
381.24 Kb
Download

WHEELCHAIR USERS LAVATORY

VITREOUS CHINA

BARRIER FREE

WHEELCHAIR USERS LAVATORY

Vitreous china

Wall mount sink

Front overflow

For concealed arms support (by others)

Faucet ledge (faucet not included)

Faucet Holes on 102mm (4") centers

9141.011 Faucet holes on 102mm (4") centers (Illustrated)

9141.029 Faucet holes on 102mm (4") centers

Extra right-handhole

9141.035 Faucet holes on 102mm (4") centers

Extra left-handhole

9141.911 Faucet holes on 102mm (4") centers

Less overflow

Faucet Holes on 267mm (10-1/2")centers

9140.013 Faucet holes on 267mm(10-1/2")centers

9140.021 Faucet holes on 267mm(10-1/2")centers

Extra right-handhole

9140.039 Faucet holes on 267mm(10-1/2")centers

Extra left-handhole

9140.913 Faucet holes on 267mm(10-1/2")centers

Less overflow

Faucet Holes center hole only

9140.047 Center hole only

9140.947 Center hole only

Less overflow

Nominal Dimensions:

508 x 686mm (20" x 27")

Bowl Sizes:

14" (356mm) wide

14-3/4"(375mm) front to back

4-3/4"(121mm) deep

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2 for Vitreous China Fixtures

SEE REVERSE FOR ROUGHING-INDIMENSIONS

To Be Specified:

Color: White Bone Silver

Faucet*:

Faucet Finish:

Supplies with Stop:

1-1/4"Trap:

Nipple:

Concealed Arms Support (by others):

Offset Grid Drain Assembly: 7723.018

* See faucet section for additional models available

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Top of front rim mounted 864mm (34") from finished floor.

 

M9

 

© 2008 AS America Inc.

Revised 8/05

 

WHEELCHAIR USERS LAVATORY

VITREOUS CHINA

BARRIER FREE

9141.011

 

 

 

 

 

FINISHED WALL

 

 

1-1/4O.D TAILPIECE

 

 

 

 

 

 

 

181mm

102mm

 

191mm

 

273mm

(4)

114mm

 

(7-1/8)

(7-1/2)

 

 

 

(10-3/4)

 

 

(4-1/2)

 

 

 

 

 

 

 

178mm

686mm

 

 

 

 

 

(27)

(6) 25mm (1) DIA.

 

 

(7)

 

 

 

 

 

ACCESS HOLES

 

 

 

 

 

(2) 54mm (2-1/8)DIA. HOLES FOR CONC. ARMS

(2) 11mm (7/16) DIA. ANCHOR SCREW HOLES

 

 

178mm

 

 

 

C/L

(7)

 

 

 

 

 

 

 

508mm

 

 

 

 

 

 

 

 

 

 

 

 

(20)

44mm

 

 

 

 

 

425mm

 

 

 

 

 

(1-3/4)

 

 

 

 

 

(16-3/4)

67mm

 

 

 

 

 

203mm

 

 

76mm

 

(2-5/8)

 

 

(3)

 

(8)

 

 

*290mm

168mm

 

 

 

 

(11-7/16)

 

 

 

 

 

(6-5/8)

 

 

 

 

*229mm

 

 

 

 

 

(9)

 

 

 

203mm

 

 

 

 

 

 

 

 

 

 

 

 

(8)

156mm

 

 

 

SUPPLIES

 

 

 

 

1-1/4O.D.

(6-3/16)

 

 

 

AS REQ'D.

 

 

 

 

 

 

 

 

 

TAILPIECE

 

 

 

1-1/4O.D. WASTE

 

 

864mm

 

 

 

 

(34)

 

 

 

 

 

SUGGESTED

 

 

 

 

 

FINISHED

 

 

 

 

 

 

FLOOR

 

9141.035

 

 

 

 

 

FINISHED WALL

 

 

 

1-1/4O.D TAILPIECE

 

 

 

 

 

 

 

102mm

 

 

 

273mm

181mm

(4)

 

 

 

 

(7-1/8)

 

114mm

 

191mm

 

(10-3/4)

 

 

114mm

(7-1/2)

 

222mm

 

(4-1/2)

 

 

 

(4-1/2)

 

 

 

(8-3/4)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

178mm

686mm

 

 

 

 

 

(27)

(6) 25mm (1) DIA.

 

 

 

(7)

 

ACCESS HOLES

 

 

 

 

 

 

DIA.1/8)-(254mm(2)CONC.FORHOLESARMS DIA.(7/16)11mm(2) HOLESSCREWANCHOR

 

 

 

178mm

 

 

 

 

C/L

 

(7)

 

 

 

 

 

 

 

 

 

 

508mm

 

 

 

 

 

 

(20)

 

44mm

 

 

 

 

425mm

 

 

 

 

 

 

(1-3/4)

 

 

 

 

(16-3/4)

 

67mm

 

 

 

 

203mm

 

 

 

76mm

 

 

(2-5/8)

 

(3)

 

(8)

 

 

 

*290mm

168mm

 

 

 

 

 

(11-7/16)

 

 

 

 

 

 

(6-5/8)

 

 

 

 

 

*229mm

 

 

 

 

 

(9)

 

 

203mm

 

 

 

 

 

 

 

 

 

 

 

 

(8)

 

156mm

 

 

SUPPLIES

 

 

 

 

 

1-1/4O.D.

(6-3/16)

 

 

AS REQ'D.

 

 

 

 

 

 

 

 

 

 

TAILPIECE

 

 

 

1-1/4O.D. WASTE

 

 

864mm

 

 

 

 

(34)

 

 

 

 

 

SUGGESTED

 

 

 

 

 

FINISHED

 

 

 

 

 

 

FLOOR

 

9141.029

 

 

 

 

 

 

FINISHED WALL

 

 

1-1/4O.D TAILPIECE

 

 

 

 

 

 

 

 

 

181mm

102mm

114mm

191mm

 

 

 

 

(4)

(4-1/2)

(7-1/2)

 

 

273mm

(7-1/8)

222mm

 

 

 

(10-3/4)

 

 

 

114mm

 

 

 

(8-3/4)

 

 

 

 

 

(4-1/2)

 

 

 

 

 

 

 

 

 

 

 

 

178mm

 

686mm

 

 

 

 

 

 

(27)

(6) 25mm (1) DIA.

 

 

(7)

 

 

ACCESS HOLES

 

 

 

 

 

 

(2) 54mm (2-1/8)DIA. HOLES FOR CONC. ARMS

(2) 11mm (7/16) DIA. ANCHOR SCREW HOLES

 

 

178mm

 

 

 

 

C/L

(7)

 

 

 

 

 

 

 

 

 

508mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(20)

44mm

 

 

 

 

 

 

425mm

 

 

 

 

 

 

(1-3/4)

 

 

 

 

 

 

(16-3/4)

67mm

 

 

 

 

 

203mm

 

 

76mm

 

(2-5/8)

 

 

(3)

 

(8)

 

 

 

*290mm

168mm

 

 

 

 

 

(11-7/16)

 

 

 

 

 

 

(6-5/8)

 

 

 

 

 

*229mm

 

 

 

 

 

 

(9)

 

 

 

203mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(8)

156mm

 

 

 

SUPPLIES

 

 

 

 

1-1/4O.D.

(6-3/16)

 

 

 

AS REQ'D.

 

 

 

 

 

 

 

 

TAILPIECE

 

 

1-1/4O.D. WASTE

 

864mm

 

 

(34)

 

 

 

 

SUGGESTED

 

 

FINISHED

 

 

 

 

FLOOR

 

9140.013

 

 

 

 

FINISHED WALL

 

1-1/4O.D TAILPIECE

 

 

 

273mm

219mm

114mm

191mm

 

(8-5/8)

(7-1/2)

 

(10-3/4)

 

(4-1/2)

 

 

 

 

 

178mm

686mm

 

 

 

(27)

 

 

 

(7)

 

 

 

267mm

 

 

 

 

(10-1/2)

 

 

(6) 25mm (1) DIA.

 

178mm

 

C/L

(7)

 

ACCESS HOLES

 

 

 

 

508mm

 

 

 

 

(20)

(2) 11mm (7/16) DIA.

 

 

 

 

 

425mm

ANCHOR SCREW HOLES

(2) 54mm (2-1/8)DIA.

(16-3/4)

44mm

 

HOLES FOR CONC. ARMS

 

 

203mm

(1-3/4)

 

 

 

 

 

 

(8)

 

 

 

76mm

 

67mm

 

 

(2-5/8)

168mm (3)

 

 

 

165mm

(6-5/8)

 

 

(6-1/2)

*229mm

 

 

 

 

(9)

 

 

 

 

*290mm

SUPPLIES

267mm

 

 

AS REQ'D.

 

 

(11-7/16)

 

(10-1/2)

 

156mm

 

 

 

 

 

 

1-1/4O.D. TAILPIECE

(6-3/16)

 

1-1/4O.D. WASTE

 

 

 

 

 

 

 

864mm

 

 

 

 

(34)

 

 

 

 

SUGGESTED

 

 

 

FINISHED

 

 

 

FLOOR

M10

 

 

 

 

© 2008 AS America Inc.

Revised 8/05

WHEELCHAIR USERS LAVATORY

VITREOUS CHINA

BARRIER FREE

9140.021

 

 

 

 

FINISHED WALL

 

1-1/4O.D TAILPIECE

 

 

 

 

 

70mm

 

 

 

219mm

(2-3/4)

191mm 197mm

273mm

114mm

(8-5/8)

(7-1/2)

(7-3/4)

(10-3/4)

 

(4-1/2)

 

 

 

 

 

178mm

686mm

 

 

 

(27)

 

 

 

(7)

 

 

 

267mm

 

 

 

 

(10-1/2)

 

 

(6) 25mm (1) DIA.

 

178mm

 

C/L

(7)

 

ACCESS HOLES

 

 

 

 

508mm

 

 

 

 

(20)

(2) 11mm (7/16) DIA.

 

 

 

 

 

425mm

ANCHOR SCREW HOLES

(2) 54mm (2-1/8)DIA.

(16-3/4)

44mm

HOLES FOR CONC. ARMS

 

203mm

(1-3/4)

 

 

 

 

(8)

 

 

 

76mm

 

 

67mm

 

 

(2-5/8)

168mm (3)

 

 

 

165mm

(6-5/8)

 

 

(6-1/2)

*229mm

 

 

 

 

(9)

 

 

 

 

*290mm

SUPPLIES

267mm

 

 

AS REQ'D.

 

 

(11-7/16)

 

(10-1/2)

 

156mm

 

 

 

 

 

 

1-1/4O.D. TAILPIECE

(6-3/16)

 

1-1/4O.D. WASTE

 

 

 

 

 

 

 

864mm

 

 

 

 

(34)

 

 

 

 

SUGGESTED

 

 

 

FINISHED

 

 

 

FLOOR

9140.039

 

 

 

 

FINISHED WALL

 

 

1-1/4O.D TAILPIECE

 

 

 

219mm 197mm

70mm

 

191mm

 

273mm (8-5/8)(7-3/4)

114mm

(7-1/2)

 

(2-3/4)

 

(10-3/4)

(4-1/2)

 

 

 

 

 

 

 

 

178mm

686mm

 

 

 

(27)

 

 

 

(7)

 

 

 

267mm

 

 

 

 

(10-1/2)

 

 

(6) 25mm (1) DIA.

 

 

178mm

 

 

C/L

(7)

 

ACCESS HOLES

 

 

 

 

 

508mm

 

 

 

 

(20)

(2) 11mm (7/16) DIA.

 

 

 

 

 

425mm

ANCHOR SCREW HOLES

(2) 54mm (2-1/8)DIA.

 

(16-3/4)

44mm

 

HOLES FOR CONC. ARMS

 

 

 

 

203mm

(1-3/4)

 

 

 

 

 

 

(8)

 

 

76mm

 

67mm

 

(2-5/8)

168mm (3)

 

 

 

 

 

165mm

(6-5/8)

 

 

 

(6-1/2)

*229mm

 

 

 

 

(9)

 

 

 

 

*290mm

SUPPLIES

267mm

 

 

AS REQ'D.

 

 

(11-7/16)

 

(10-1/2)

 

156mm

 

 

 

 

 

 

 

1-1/4O.D. TAILPIECE

(6-3/16)

 

1-1/4O.D. WASTE

 

 

 

 

 

 

 

864mm

 

 

 

 

(34)

 

 

 

 

SUGGESTED

FINISHED

FLOOR

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Top of front rim mounted 864mm (34") from finished floor.

NOTES:

*DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.

CONCEALED ARM SUPPORT AS REQUIRED TO BE FURNISHED BY OTHERS.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

 

M11

 

© 2008 AS America Inc.

Revised 9/04