American Dryer Corp Dyer AD-295 User Manual

Size:
1.27 Mb
Download

AD-26 /AD-295

Parts Manual

24 VAC Phase 5

1992 thru 1998

American Dryer Corporation

88 Currant Road

Fall River, MA02720-4781

Telephone: (508) 678-9000 /Fax: (508)678-9447

E-mail: techsupport@amdry.com

www.amdry.com

ADC Part No. 450122

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, andtrouble-freeoperation.

ONLY properly licensed technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer.

WARNING: UNDER NO CIRCUMSTANCES should the door switch or the heat circuit devices ever be disabled.

WARNING: The dryer must never be operated with any of the back guards, outer tops, or service panels removed. PERSONAL INJURY or FIRE COULD RESULT.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE

________________________________________ MODEL NO. _______________________________

DISTRIBUTORS NAME

__________________________________________________________________________________

Serial Number(s) ________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the factory, you can FAX your order toADC at (508)678-9447or telephone your orders directly to theADC Parts Department at (508)678-9010.Please specify the dryermodel number andserial number in addition to thedescription andpart number, so that your order is processed accurately and promptly.The illustrations on the following pages may not depict your particular dryer exactly.

The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS MUST BE POSTED INAPROMINENT LOCATION. THE INSTRUCTIONS TO BE POSTED SHALL BE OBTAINED FROM THE LOCAL GAS SUPPLIER.

Table of Contents

 

Coin Control Door Assembly For Models Mfd. as of March 21, 1997 .................................................

2

Coin Control Door Assembly For Models Mfd. prior to March 21, 1997 ..............................................

3

Non-CoinControl Door Assembly For Models Mfd. as of March 21, 1997 ..........................................

4

Non-CoinControl Door Assembly For Models Mfd. prior to March 21, 1997 .......................................

5

Dual Timer Control Door Assembly For Models Mfd. as of March 21, 1997 .......................................

6

Dual Timer Control Door Assembly For Models Mfs. prior to March 21, 1997 ....................................

7

Single Coin Microprocessor Control Panel Assembly For Models Mfd. as of April 11, 1996 ...............

8

Single Coin Microprocessor Control Panel Assembly for Single Coin 25¢ Models Only ....................

9

Dual Coin Microprocessor Control Panel Assembly .........................................................................

10

Non-CoinMicroprocessor Control Panel Assembly ..........................................................................

11

Microprocessor Control Box Assembly .............................................................................................

12

25¢ Coin Acceptor Listing .................................................................................................................

13

Dual Coin Acceptor Component Listing for Export Models Only .................................................

14, 15

Dual Timer Control Panel Assembly .................................................................................................

16

Non-MicroprocessorCoin Control Panel Assembly ..........................................................................

17

Non-MicroprocessorControl Box Assembly .....................................................................................

18

Main Door Assembly .........................................................................................................................

19

Main Door Switch Assembly .............................................................................................................

20

Coin Vault Assembly .........................................................................................................................

21

Coin Front Panel Assembly ...............................................................................................................

22

Non-CoinFront Panel Assembly .......................................................................................................

23

Lint Door Assembly ...........................................................................................................................

24

Lint Basket / Lint Switch Assemblies ................................................................................................

25

AD-26Tumbler / Support Assemblies For Models Mfd. as of August 17, 1998 .................................

26

AD-26Tumbler / Support Assemblies For Models Mfd prior to August 17, 1998 ..............................

27

AD-295Tumbler / Support Assemblies For Models Mfd. as of November 2, 1998 ...........................

28

AD-295Tumbler / Support Assemblies For Models Mfd. prior to November 2, 1998 ........................

29

Tumbler Brush Assembly ..................................................................................................................

30

Microprocessor Temperature Sensor Bracket Assembly .................................................................

31

Non-MicroprocessorTemperature Sensor Bracket Assembly ..........................................................

32

Sail Switch Assembly ........................................................................................................................

33

Tumbler Bearing Assembly .........................................................................................................

34, 35

Totally Enclosed, Non-VentMotor / Idler Assemblies...................................................................

36, 37

Upshot Burner Assembly ............................................................................................................

38, 39

Back Guard Assembly.......................................................................................................................

40

12-Rib120" (J) Poly Belt Arrangement .............................................................................................

41

Upshot Burner Assembly Specifications ...........................................................................................

42

Additional Parts Available ..................................................................................................................

43

AD-26/AD-295Coin Control Door Assembly

For Models Mfd. as of March 21, 1997

Illus. No. Part No. Qty. Description

1

881585

1

AD-26/AD-295Coin Control Door with Trim Less Locks

 

 

 

(includes illus. nos. 1, 5, and 6)

 

881583

1

AD-26/AD-295Stainless Steel Coin Control Door with Trim Less Locks

 

 

 

(includes illus. nos. 1, 5, and 6)

2

112350

1

ADC Logo Only

 

870011

1

Logo Double Stick Tape Kit

3

160040

2

ACE® Lock Assembly Only

4

160140

-

ACE® Key Only

 

 

 

(key number XX4451)

5

180315

1

AD-26/AD-295Lower Control Door Trim

6

150310

5

#8 x 1/2" Phillips Pan Head "A" Screw

7

150300

4

#10 x 1/2” Hex Washer TEK Screw

* Specify color when ordering.

2

American Dryer Corporation

450122-6

Coin Control Door Assembly

For Models Mfd. prior to March 21, 1997

Illus. No. Part No. Qty. Description

1

880236

1

AD-26/AD-295Coin Control Door with Trim Less Locks

 

 

 

(includes illus. nos. 1, 5, and 6)

 

850414

1

AD-26/AD-295Coin Control D

2

112350

1

ADC Logo Only

 

870011

1

Logo Double Stick Tape Kit

3

160040

1

ACE® Lock Assembly Only

4

160140

-

ACE® Key Only

 

 

 

(key number XX4451)

5

180315

1

AD-26/AD-295Lower Control Door Trim

6

150310

5

#8 x 1/2" Phillips Pan Head "A" Screw

* Specify color when ordering.

450122-6

Telephone: (508) 678-9000 /www.amdry.com

3

Non-CoinControl Door Assembly

For Models Mfd. as of March 21, 1997

Illus. No. Part No. Qty. Description

1

881586

1

AD-26/AD-295Non-CoinControl Door with Trim Less Locks

 

 

 

(includes illus. nos. 1, 5, and 6)

2

112350

1

ADC Logo Only

 

870011

1

Logo Double Stick Tape Kit

3

160040

2

ACE® Lock Assembly Only

4

160140

-

ACE® Key Only

 

 

 

(key number XX4451)

5

180315

1

AD-26/AD-295Lower Control Door Trim

6

150310

5

#8 x 1/2" Phillips Pan Head "A" Screw

7

150300

4

#10 x 1/2” Hex Washer TEK Screw

* Specify color when ordering.

4

American Dryer Corporation

450122-6

Non-CoinControl Door Assembly

For Models Mfd. prior to March 21, 1997

Illus. No. Part No. Qty. Description

1

880918*

1

AD-26/AD-295Non-CoinControl Door with Trim Less Locks

 

 

 

(includes illus. nos. 1, 5, and 6)

 

880917*

1

AD-26/AD-295Non-CoinControl Door Only

2

112350

1

ADC Logo Only

 

870011

1

Logo Double Stick Tape Kit

3

160040

1

ACE® Lock Assembly Only

4

160140

-

ACE® Key Only

 

 

 

(key number XX4451)

5

180315

1

AD-26/AD-295Lower Control Door Trim

6

150310

5

#8 x 1/2" Phillips Pan Head "A" Screw

* Specify color when ordering.

450122-6

Telephone: (508) 678-9000 /www.amdry.com

5

Dual Timer Control Door Assembly

For Models Mfd. as of March 21, 1997

Illus. No. Part No. Qty. Description

1

881596

1

AD-26/AD-295Coin Control Door with Trim Less Locks

 

 

 

(includes illus. nos. 1, 5, and 6)

2

112350

1

ADC Logo Only

 

870011

1

Logo Double Stick Tape Kit

3

160040

2

ACE® Lock Assembly Only

4

160140

-

ACE® Key Only

 

 

 

(key number XX4451)

5

180315

1

AD-26/AD-295Lower Control Door Trim

6

150310

5

#8 x 1/2" Phillips Pan Head "A" Screw

7

150300

4

Hex Washer TEK Screw

6

American Dryer Corporation

450122-6

Dual Timer Control Door Assembly

For Models Mfd. prior to March 21, 1997

Illus. No. Part No. Qty. Description

1

880773*

1

AD-26/AD-295Coin Control Door with Trim Less Locks

 

 

 

(includes illus. nos. 1, 5, and 6)

 

850415*

1

AD-26/AD-295Coin Control Door Only

2

112350

1

ADC Logo Only

 

870011

1

Logo Double Stick Tape Kit

3

160040

1

ACE® Lock Assembly Only

4

160140

-

ACE® Key Only

 

 

 

(key number XX4451)

5

180315

1

AD-26/AD-295Lower Control Door Trim

6

150310

5

#8 x 1/2" Phillips Pan Head "A" Screw

* Specify color when ordering.

450122-6

Telephone: (508) 678-9000 /www.amdry.com

7

Single Coin Microprocessor Control Panel Assembly

For Models Mfd. as of April 11, 1996

Illus. No. Part No. Qty. Description

1

112568

1

Single Coin Keyboard for Hanke Acceptor

2

881163

1

25¢ Hanke Coin Acceptor with Optic

 

881450

1

25¢ Canadian Coin Acceptor with Optic

 

881451

1

0.880 Token Hanke Coin Acceptor with Optic

3

150150

1

2.5 mm x 10 mm Stainless Steel Phillips Screw

4

881143

1

Hanke Optic Switch

5

150415

1

#10-16x 1/2” Phillips Screw

6

883353

1

Control Panel Assembly Complete Less Acceptor

 

 

 

(includes illus. nos. 1 and 5 through 10)

 

883352

1

Control Panel Only

7

137216

1

Phase 5 Coin Board

8

152102

4

M-3Metric Hex Nut

9

153010

2

#6 Star Washer

10

150005

2

#6-32x 1/4” Phillips Round Head Machine Screw

8

American Dryer Corporation

450122-6