American Dryer Corp AD-75D II User Manual

Size:
1.52 Mb
Download

AD-75DII

Parts Manual

American Dryer Corporation

88 Currant Road

Fall River, MA02720-4781

Telephone: (508) 678-9000 /Fax: (508)678-9447

E-mail: techsupport@amdry.com

073100MFM/tcosta

ADC Part No. 450432

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, andtrouble-freeoperation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” cautionmust be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO.

__________________________________________AD - 75D II

RESELLER’S NAME

_______________________________________________________________________________________

Serial Number(s)

________________________________________________________________________________________

 

________________________________________________________________________________________

 

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order toADC at (508)678-9447or telephone your order directly to theADC Parts Department at (508)678-9000.Please specify the dryermodel number andserial number in addition to thedescription andpart number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructionsmust be posted in a prominent location near the dryer.

Table of Contents

 

Control Door Assembly Without Trim

 

For OPL (Non-Coin) Models Mfd. as of July 13, 1998 ........................................................................

2

Control Door Assembly With Trim

 

For ALL Coin Models and ONLY OPL Models Mfd. prior to July 13, 1998...................................

3

Phase 5 Coin Microprocessor Control Panel Assembly ......................................................................................

4

Phase 5 OPL Microprocessor Control Panel Assembly ......................................................................................

5

Phase 5 Coin and OPL Microprocessor Control Box Assembly .........................................................................

6

Coin Vault Assembly ............................................................................................................................................

7

Dual Timer Control Panel Assembly

 

For Models Mfd. prior to November 3, 2000 ...................................................................................

8, 9

Dual Timer “Tap Touch” Controls

 

For Models Mfd. as of November 3, 2000 ...........................................................................................

10

Dual Timer Control Box Assembly ....................................................................................................................

11

“Plastic” Door Front Panel Assembly ...............................................................................................................

12

Cold Rolled Steel (CRS) Door Front Panel .......................................................................................................

13

“Plastic” Door Main Door Switch Housing .......................................................................................................

14

Main Door Switch Assembly Cold Rolled Steel (CRS) Door ............................................................................

15

Cold Rolled Steel (CRS) Main Door Assembly ...........................................................................................

16, 17

“Plastic” Main Door Assembly ..........................................................................................................................

18

Basket (Tumbler)/Support Assemblies ...............................................................................................................

19

Drop Lint Door Assembly Without Trim

 

For OPL (Non-Coin) Models .................................................................................................................

20

Drop Lint Door Assembly With Trim

 

For ALL Coin Models .............................................................................................................................

21

Basket (Tumbler) Bearing Assembly ...........................................................................................................

22, 23

Lint Trap Assembly ............................................................................................................................................

24

Idler Bearing Assembly .....................................................................................................................................

25

Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly .....................................

26, 27

Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly .............................................

28, 29

Sensor Bracket Assemblies .........................................................................................................................

30, 31

Electric Oven Assembly ..............................................................................................................................

32, 33

4-Tube Burner Assembly .............................................................................................................................

34, 35

Single-Phase (1Ø) Motor, Electric Relay Panel Assembly ................................................................................

36

3-Phase (3Ø) Motor, Electric Relay Panel Assembly .......................................................................................

37

Microprocessor Reversing Rear Control Box Assembly

 

For Gas, Electric, and Steam Models ...................................................................................................

38

Dual Timer Reversing Rear Control Box Assembly

 

For Gas, Electric, and Steam Models ...................................................................................................

39

Air Operated Steam Damper Assembly ......................................................................................................

40, 41

Outer Top/Back Guard Assemblies

 

For Gas and Electric Models ONLY .....................................................................................................

42

Back Guard Assembly

 

For Steam Models ONLY........................................................................................................................

43

Microprocessor Coin Acceptors Listing ............................................................................................................

44

Electric Oven Component Application Chart .....................................................................................................

45

Step Down Transformer Usage Listing .............................................................................................................

46

Additional Parts Available ..................................................................................................................................

47

2

Control Door Assembly Without Trim

 

For OPL (Non-Coin)Models Mfd. as of July 13, 1998

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

881053

1

ADC Logo ONLY (with double adhesive tape)

 

870011

1

Logo Double Tape Kit

2

881045*

1

Control Door

 

 

 

(includes illus. nos. 2 and 3)

 

881046

1

Stainless Steel Control Door

 

 

 

(includes illus. nos. 2 and 3)

3

117604

4

Neoprene Sponge Tape (sold by the foot)

4

150300

4

#10 x 1/2” Hex Washer TEK Screw

5

102603

1

Control Door Rod Support Catch

6

102601

1

Control Door Rod Retainer Clip

7

102502

1

Control Door Support Rod

8

882541

2

Spring Turn Latch Assembly

*Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Control Door Assembly With Trim

3

ForALL Coin Models and ONLY OPL Models Mfd. prior to July 13, 1998

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

 

1

 

160015

1

High Security MK-100Lock Assembly with Key

 

 

 

 

 

(for coin models Only)

 

 

 

160017

1

Special Dummy Lock ONLY

 

 

 

 

 

(for non-coinmodels Only)

 

 

 

160104

1

MK-100Key ONLY (for dummy lock also)

 

2

 

160016

1

Lock Cam ONLY

 

3

 

112350

1

ADC Logo ONLY

 

 

 

870011

1

Logo Double Tape Kit

 

4

 

800020*

1

High Security Control Door Assembly

 

 

 

 

 

(includes illus. nos. 4 through 7)

 

 

 

800144

1

Stainless Steel High Security Control Door Assembly

 

 

 

 

 

(includes illus. nos. 4 through 7)

 

5

 

180202

1

Top Trim Strip (gray) with Lock Hole (38-1/4”length)

 

6

 

117603

3

Suppressor Tape/Gasket (sold by the foot)

 

7

 

150201

6

#10-32x 1/4” Phillips Pan Head TEK Screw

 

8

 

150309

4

#10-16x 1/2” Hex Head TEK Crimptite Screw

 

9

 

102603

1

Control Door Rod Support Catch

 

10

 

102601

1

Control Door Rod Retainer Clip

 

11

 

102502

1

Control Door Support Rod

 

*Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

4

Phase 5 Coin Microprocessor Control Panel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

 

1

112526

1

Coin Keyboard Label Assembly

 

2

801213

1

Phase 5 Coin Control Panel Assembly

 

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

 

801229

1

Phase 5 Coin Control Panel Assembly with Battery Option

 

 

 

 

(includes illus. nos. 1, 2, 4, 5, and 6)

 

 

801259

1

Coin Control Panel ONLY

 

 

801258

1

Coin Control Panel ONLY with Battery Bracket

 

3

150309

1

#10-16x 1/2” Hex Head TEK Crimptite Screw

 

4

137213

1

Phase 5 Coin Controller ONLY

 

 

824998

1

Phase 5 Battery Clip

 

5

153010

2

#6 Star Washer

 

6

150005

2

#6-32x 1/4” Phillips Round Head Machine Screw

 

7

--------

1

Coin Acceptor

 

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 44)

 

8*

--------

1

Optic Switch ONLY

 

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 44)

 

9*

137023

1

Optic Switch Connector ONLY

 

10

137021*

3

Microprocessor Socket ONLY

 

 

880772

1

Single Coin Optical Switch Harness

 

 

824080

1

Dual Coin Optical Switch Harness

 

 

122800

1

Microprocessor (female) Pin Extraction Tool

 

11

136048

1

1/8-Amp(slo blo) Fuse

 

*For dual coin models double the quantity shown.

IMPORTANT: Check label on computer chip to verify correct part number of controller.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Phase 5 OPL Microprocessor Control Panel Assembly

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

112535

1

OPL English Keyboard Label Assembly

 

112276

1

OPL Stick-OnLabels (English Only) ... Not Illustrated

 

112275

1

OPL Stick-OnLabels ... Not Illustrated

 

 

 

(Spanish, Italian, and Hebrew)

 

112277

1

3-LanguageOPLStick-OnLabels ... Not Illustrated

 

 

 

(English, Spanish, and Hebrew)

 

112278

1

5-LanguageOPLStick-OnLabels ... Not Illustrated

 

 

 

(Italian, Dutch, French, German, and Chinese)

2

801255

1

Phase 5 Microprocessor Control Panel ONLY

 

801256

1

Phase 5 Microprocessor Control Panel ONLY with Battery Bracket

 

801206

1

Phase 5 OPL Non-ReversingMicroprocessor Control Panel Assembly

 

 

 

Complete

 

 

 

(includes illus. nos. 1 through 6)

 

801207

1

Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete

 

 

 

(includes illus. nos. 1 through 6)

3

137222

1

Phase 5 OPL Non-ReversingController ONLY

 

137231

1

Phase 5 OPL Reversing Controller ONLY

 

824998

1

Phase 5 Battery Clip

4

153010

2

#6 Star Washer

5

150005

2

#6-32x 1/4” Phillips Round Head Machine Screw

6

150413

1

#10-16x 1/2” TORX Crimptite

7

136048

1

1/8-Amp(slo blo) Fuse

IMPORTANT: Check label on computer chip to verify correct part number for controller.

Telephone: (508) 678-9000

Fax: (508) 678-9447

6

Phase 5 Coin and OPL Microprocessor Control Box Assembly

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

141403

1

Transformer - 24 VAC

 

 

 

(for ALL 120/208/240/380/416/480 volt gas and steam models)

 

 

 

(for 380/416/480 volt electric models)

 

132070

1

Transformer - 24 VAC

 

 

 

(for 208/240 volt electric models)

2

150300

2

#10 x 1/2” Hex Washer TEK Screw

3

120715

1

30-PositionTerminal Block

4

150002

2

#6-32x 1” Phillips Round Head Machine Screw

5

151000

2

#6-32Pal Nut

6

136057

*

1/2-Amp(slo blo) Fuse ONLY

7

150301

*

#8-18x 7/16” Phillips Pan Head TEK Screw

8

136008

*

Fuse Block/Strip ONLY

9

122641

1

15-PinMicroprocessor Connector

10

122706

*

Socket ONLY

 

112801

1

Pin/Socket Extraction Tool

*As required.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

Coin Vault Assembly

7

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

802112

1

Microprocessor Coin Vault Assembly Complete

 

 

 

(includes illus. nos. 1 through 6)

 

802117

1

Microprocessor Coin Vault ONLY

2

160028

1

Cam For 1/4 Turn Lock ONLY

3

875061

1

1/4 Turn Lock with Key and Cam

 

160105*

1

1/4 Turn Mer-PelKey ONLY

4

802020

1

1/4 Turn Coin Box Assembly

 

 

 

(includes illus. nos. 2 through 5)

 

802019

1

1/4 Turn Coin Box ONLY without Face Plate

 

125915

1

High Security (Greenwald) Coin Box ONLY with Key

5

802018

1

1/4 Turn Coin Box Face Plate ONLY

6

152014

4

1/4-20Free Spin Wash Nut

7

102502

1

Control Door Support Rod

8

102601

1

Control Door Rod Retainer Clip

9

102603

1

Control Door Rod Support Catch

*Specify key number when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

 

8

Dual Timer Control Panel Assembly

 

 

For Models Mfd. prior to November 3, 2000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781