American Dryer Corp AD-285 User Manual

Size:
2.41 Mb
Download

AD-285Parts Manual

1987 thru 1991

American Dryer Corporation

88 Currant Road

Fall River, MA02720-4781

Telephone: (508) 678-9000 /Fax: (508)678-9447

e-mail: techsupport@amdry.com

www.amdry.com

ADC Part No. 450085

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” cautionmust be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO.

__________________________________________AD - 285

RESELLER’S NAME

_______________________________________________________________________________________

Serial Number(s)

________________________________________________________________________________________

 

________________________________________________________________________________________

 

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order toADC at (508)678-9447or telephone your order directly to theADC Parts Department at (508)678-9000.Please specify the dryermodel number andserial number in addition to thedescription andpart number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructionsmust be posted in a prominent location near the dryer.

Table of Contents

 

High Security Control DoorAssembly .....................................................................................................

3

Phase 4.1 Single Coin Microprocessor Control PanelAssembly

 

For Direct Spark Ignition (DSI) Models Only .....................................................................................

4

Phase 4.1 Single Coin Microprocessor Control BoxAssembly

 

For Direct Spark Ignition (DSI) Models Only ......................................................................................

5

Phase 4.1 Dual Coin Microprocessor Control PanelAssembly

 

For Direct Spark Ignition (DSI) Models Only .....................................................................................

6

Phase 4.1 Dual Coin Microprocessor Control BoxAssembly

 

For Direct Spark Ignition (DSI) Models Only ......................................................................................

7

Phase 4 Single Coin Microprocessor Control Panel/BoxAssemblies

 

For Glo-Bar® Ignition Models Only .................................................................................................

8, 9

Phase 4 Dual Coin Microprocessor Control Panel/BoxAssemblies

 

For Glo-Bar® Ignition Models Only .............................................................................................

10, 11

Phase 4 OPL Microprocessor Control PanelAssembly

 

For Direct Spark Ignition (DSI) Models Only ....................................................................................

12

Phase 4 OPL Microprocessor Control BoxAssembly

 

For Direct Spark Ignition (DSI) Models Only ....................................................................................

13

Phase 3 OPL Microprocessor Control PanelAssembly

 

For Glo-Bar® Ignition Models Only ...................................................................................................

14

Phase 3 OPL Microprocessor Control BoxAssembly

 

For Glo-Bar® Ignition Models Only ...................................................................................................

15

Dual Timer Control Panel/BoxAssemblies

 

For Direct Spark Ignition (DSI) Models Only ..............................................................................

16, 17

Dual Timer Control Panel/BoxAssemblies

 

For Glo-Bar® Ignition Models Only .............................................................................................

18, 19

Non-MicroprocessorCoin Control Panel/BoxAssemblies

 

For Direct Spark Ignition (DSI) and Glo-Bar® Ignition Models ....................................................

20, 21

Coin Meter Replacement Parts .............................................................................................................

22

Coin VaultAssembly .............................................................................................................................

23

Front PanelAssembly

 

Latch-Type .......................................................................................................................................

24

Front PanelAssembly

 

Magnet-Type ....................................................................................................................................

25

Main DoorAssembly

 

Latch-Type .......................................................................................................................................

26

Main DoorAssembly

 

Magnet-Type ....................................................................................................................................

27

Main Door SwitchAssembly

 

N.S. Series .......................................................................................................................................

28

Main Door SwitchAssembly

 

Plunger-Type ..................................................................................................................................

29

Drop Lint DoorAssembly .....................................................................................................................

30

LintTrapAssembly ...............................................................................................................................

31

Basket (Tumbler)/SupportAssembly

 

Tapered Rib

 

For Models Mfd. as of April 18, 1991 ............................................................................................

32

Basket (Tumbler)/SupportAssembly

 

Standard Rib

 

For Models Mfd. prior to April 18, 1991 ........................................................................................

33

Basket (Tumbler) BearingAssembly ................................................................................................

34, 35

Idler BearingAssembly ...................................................................................................................

36, 37

Totally Enclosed, Fan-Cooled(T.E.F.C.) Motor MountAssembly

 

For 60 Hz Models with Tapered Ribs Only ...............................................................................

38, 39

Totally Enclosed, Fan-Cooled(T.E.F.C.) Motor MountAssembly

 

For 60 Hz Models with Standard Ribs Only ..............................................................................

40, 41

Totally Enclosed, Fan-Cooled(T.E.F.C.) Motor MountAssembly

 

For 50 Hz Models with Tapered and Standard Ribs ..................................................................

42, 43

Sensor BracketAssemblies .............................................................................................................

44, 45

Direct Spark Ignition (DSI) BurnerAssembly ..................................................................................

46, 47

Hi/Lo Microprocessor BurnerAssembly

 

For Glo-Bar® Ignition Models Only ...........................................................................................

48, 49

Non-Microprocessor(Standard) BurnerAssembly

 

For Glo-Bar® Ignition Models Only ...........................................................................................

50, 51

SailSwitch/Hi-LimitAssembly ........................................................................................................

52, 53

Replacement Coil For 3/8” Hi/Lo Gas Valve

 

For Glo-Bar® Ignition Models Only .................................................................................................

54

Replacement Coil For 3/8” Non-Hi/LoGas Valve

 

For Glo-Bar® Ignition Models Only .................................................................................................

55

3-Phase(3Ø) Motor, Electric Relay PanelAssembly

 

Telemecanique (208/230 VAC Controls) .........................................................................................

56

3-Phase(3Ø) Motor, Electric Relay PanelAssembly

 

Furnas (208/230 VAC Controls) .....................................................................................................

57

Control/Heat Step Down Transformer

 

For Glo-Bar® Ignition Models Only .................................................................................................

58

Outer Top/Back GuardAssembly .........................................................................................................

59

Additional PartsAvailable .....................................................................................................................

60

Microprocessor CoinAcceptor Listing ..................................................................................................

61

WiringDiagrams ..............................................................................................................................

62-83

High Security Control Door Assembly

Illus. No. Part No. Qty. Description

1

160015

1

High Security MK-100Lock Assembly ONLY with Key

 

160104

1

MK-100Key ONLY

 

160017

1

Special Dummy Lock (noncoin models Only)

2

160016

1

Lock Cam ONLY

3

112350

1

ADC Logo ONLY

 

870011

1

Logo Double Tape Kit

4

800019*

1

High Security Control Door Assembly Complete

 

 

 

(includes illus. nos. 4 through 7)

 

800143

1

Stainless Steel High Security Control Door Assembly Complete

 

 

 

(includes illus. nos. 4 through 7)

5

180203

1

Top Trim Strip with Lock Hole (28-3/8”length)

6

102307

3

Trim Bumper Gasket (sold by the foot)

7

150201

4

#10-32x 1/4” Phillips Round Head Machine Screw

8

150415

4

#10-16x 1/2” Phillips Round Head Crimptite Screw

9

102600

1

Control Door Support Rod Catch

10

102601

1

Control Door Rod Retainer Clip

11

102503

1

Control Door Support Rod

*Specify color when ordering.

450085-8

Telephone: (508) 678-9000 /www.amdry.com

3

Phase 4.1 Single Coin Microprocessor Control Panel Assembly

For Direct Spark Ignition (DSI) Models ONLY

Illus. No. Part No. Qty. Description

1

112526

1

Coin Keyboard Label Assembly

2

865098

1

Phase 4.1 Coin Control Panel Assembly

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

865099

1

Phase 4.1 Coin Control Panel Assembly with Battery Option

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

800040

1

Microprocessor Coin Control Panel ONLY

 

800039

1

Microprocessor Coin Control Panel ONLY with Battery Bracket

3

150415

1

#10-16x 1/2” Phillips Round Head Crimptite Screw

4

137130

1

Phase 4.1 Coin Microprocessor Controller ONLY

 

137131

1

Phase 4.1 Coin Microprocessor Controller ONLY with Battery Clip

5

152001

4

#8-32Hex Nut

6

153012

4

#8 Star Washer

7

--------

1

Microprocessor Single Coin Acceptor with Optical Switch

 

 

 

(refer to Microprocessor Coin Acceptor Listingon page 61)

8

137056

1

Optical Switch ONLY

9

137023

1

Optical Switch Connector ONLY

10

137021

3

Microprocessor Socket ONLY

 

865050

1

Single Coin Optical Switch Harness

---

122800

1

Microprocessor (female) Pin Extraction Tool...Not Illustrated

IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller.

4

American Dryer Corporation

450085-8

Phase 4.1 Single Coin Microprocessor Control Box Assembly

For Direct Spark Ignition (DSI) Models ONLY

Illus. No. Part No. Qty. Description

1

137021

12

Microprocessor Socket ONLY

2

137020

1

15-PinMicroprocessor Connector ONLY

 

122800

1

Microprocessor (female) Pin Extraction Tool...Not Illustrated

3

150315

1

#6 x 3/8” Phillips Pan Head Screw

4

137022

1

15-PinStrain Relief ONLY

5

137013

4

Nylon Standoff

6

137151

1

Motor Control Solid State Relay Board, 1 HP, 125 VAC - 250 VAC 1Ø

 

 

 

50/60 Hz

7

136057

*

1/2-amp(Slo-Blo)Fuse ONLY

 

136052

*

4-ampFuse ONLY

8

150300

2

#10-16x 1/2” Hex Washer TEK Screw

9

141403

1

Direct Spark Ignition (DSI) 24 VAC Transformer (for gas models Only)

10

150002

2

#6-32x 1” Round Head Machine Screw

11

120715

1

30-PositionTerminal Block

12

151000

2

#6-32Pal Nut

13

136057

*

1/2-amp(Slo-Blo)Fuse ONLY

14

150301

*

#8-18x 7/16” Phillips Pan Head TEK Screw

15

136008

1

Fuse Block/Strip ONLY

*As required.

450085-8

Telephone: (508) 678-9000 /www.amdry.com

5

Phase 4.1 Dual Coin Microprocessor Control Panel Assembly

For Direct Spark Ignition (DSI) Models ONLY

Illus. No. Part No. Qty. Description

1

112526

1

Coin Keyboard Label Assembly

2

865098

1

Phase 4.1 Coin Control Panel Assembly

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

865099

1

Phase 4.1 Coin Control Panel Assembly with Battery Option

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

800040

1

Microprocessor Coin Control Panel ONLY

 

800039

1

Microprocessor Coin Control Panel ONLY with Battery Bracket

3

150415

1

#10-16x 1/2” Phillips Round Head Crimptite Screw

4

137130

1

Phase 4.1 Coin Microprocessor Controller ONLY

 

137131

1

Phase 4.1 Coin Microprocessor Controller ONLY with Battery Clip

5

152001

4

#8-32Hex Nut

6

153012

4

#8 Star Washer

7

--------

1

Microprocessor Dual Coin Acceptor with Optical Switch

 

 

 

(refer to Microprocessor Coin Acceptor Listingon page 61)

8

137056

2

Optical Switch ONLY

9

137023

2

Optical Switch Connector ONLY

10

137021

6

Microprocessor Socket ONLY

 

865050

1

Single Coin Optical Switch Harness

---

122800

1

Microprocessor (female) Pin Extraction Tool...Not Illustrated

IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller.

6

American Dryer Corporation

450085-8

Phase 4.1 Dual Coin Microprocessor Control Box Assembly

For Direct Spark Ignition (DSI) Models ONLY

Illus. No. Part No. Qty. Description

1

137021

12

Microprocessor Socket ONLY

2

137020

1

15-PinMicroprocessor Connector ONLY

 

122800

1

Microprocessor (female) Pin Extraction Tool...Not Illustrated

3

150315

1

#6 x 3/8” Phillips Pan Head Screw

4

137022

1

15-PinStrain Relief ONLY

5

137013

4

Nylon Standoff

6

137151

1

Motor Control Solid State Relay Board, 1 HP, 125 VAC - 250 VAC 1Ø

 

 

 

50/60 Hz

7

136057

*

1/2-amp(Slo-Blo)Fuse ONLY

 

136052

*

4-ampFuse ONLY

8

150300

2

#10 x 1/2” Hex Washer TEK Screw

9

141403

1

Direct Spark Ignition (DSI) 24VAC Transformer (for gas models Only)

10

150002

2

#6-32x 1” Round Head Machine Screw

11

120715

1

30-PositionTerminal Block

12

151000

2

#6-32Pal Nut

13

136057

*

1/2-amp(Slo-Blo)Fuse ONLY

14

150301

*

#8-18x 7/16” Phillips Pan Head TEK Screw

15

136008

1

Fuse Block/Strip ONLY

*As required.

450085-8

Telephone: (508) 678-9000 /www.amdry.com

7

Phase 4 Single Coin Microprocessor Control Panel/Box Assemblies

For Glo-Bar® Ignition Models ONLY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

American Dryer Corporation

450085-8