American Dryer Corp AD-25V User Manual
Size:
1.66 Mb
Download

AD-25V

Parts Manual

24 VAC Phase 5

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 /Fax: (508)678-9447

E-mail: techsupport@amdry.com

www.amdry.com

ADC Part No. 450342-4

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

POUR VOTRE SÉCURITÉ

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

AD-25V

DATE OF PURCHASE ____________________________________________________ MODEL NO. ______________

RESELLER’S NAME _________________________________________________________________________________

Serial Number(s) _____________________________________________________________________________________

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447or telephone your order directly to the ADC Parts Department at (508)678-9000.Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

Table of Contents

 

Non-Coin Control Door Assembly for Models Mfd. as of July 1, 2002 .........................................................................................

4

Coin Control Door Assembly for Models Mfd. as of July 1, 2002 .................................................................................................

5

Control Door Assembly for Models Mfd. prior to July 1, 2002 ......................................................................................................

6

Phase 5 Non-Coin Microprocessor Control Panel Assembly .....................................................................................................

7

Phase 5 Coin Microprocessor Control Panel Assembly .............................................................................................................

8

Coin and Non-Coin Control Box Assembly ................................................................................................................................

10

Coin Vault Assembly .....................................................................................................................................................................

11

Dual Timer “Tap Touch” Controls for Models Mfd. as of November 1, 2000 .............................................................................

12

Dual Timer Control Panel Assembly for Models Mfd. prior to November 1, 2000 ....................................................................

13

Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. as of January 25, 2002 .......................................

14

Non-Microprocessor Coin Meter Control Panel Assembly for Models Mfd. prior to January 25, 2002 ....................................

15

Front Panel Assembly for Models Mfd. with Steel Main Door as of July 1, 2002 .......................................................................

16

Front Panel Assembly for Models Mfd. with Steel Main Door prior to July 1, 2002 ....................................................................

17

Front Panel Assembly for Models Mfd. with Plastic Main Door ..................................................................................................

18

Main Door “Steel” Assembly ........................................................................................................................................................

19

Plastic Main Door Assembly ........................................................................................................................................................

20

Main Door Switch Assembly for Models Mfd. with Steel Main Door ...........................................................................................

21

Main Door Switch for Models Mfd. with Plastic Main Door .........................................................................................................

22

Tumbler / Support Assemblies ...................................................................................................................................................

23

Drop Lint Door Assembly for Models Mfd. as of July 1, 2002 .....................................................................................................

24

Lint Trap Assembly for Models Mfd. as of July 1, 2002 ..............................................................................................................

25

Lint Drawer / Lint Drawer Switch Assembly for Models Mfd. between July 25, 2000 and July 1, 2002 ....................................

26

Lint Drawer / Lint Drawer Switch Assemblies for Models Mfd. prior to July 25, 2000 ...............................................................

27

Idler Bearing Assembly ................................................................................................................................................................

28

Tumbler Bearing Assembly .........................................................................................................................................................

29

Non-Reversing Motor Mount Assembly .......................................................................................................................................

30

Reversing Motor Mount Assembly ...............................................................................................................................................

32

Sensor Bracket Assemblies for Models Mfd. as of July 1, 2002 ................................................................................................

34

Sensor Bracket Assemblies for Models Mfd. prior to July 1, 2002 ............................................................................................

36

Gas Burner Assembly for Models Mfd. as of September 29, 2000 ............................................................................................

38

Direct Spark Ignition Burner Assembly for Models Mfd. prior to September 29, 2000 ..............................................................

39

Electric Oven Assembly ...............................................................................................................................................................

40

Sail Switch / Hi-Limit Assemblies ...............................................................................................................................................

42

Single-Phase (1Ø) Motor, Electric Relay Panel Assembly .........................................................................................................

43

3-Phase (3Ø) Motor, Electric Relay Panel Assembly .................................................................................................................

44

460-480 VAC 3-Phase (3Ø) Motor, Electric Relay Panel Assembly ...........................................................................................

45

Reversing Electric Relay Panel Assembly ..................................................................................................................................

46

460-480 VAC Reversing Electric Relay Panel Assembly ...........................................................................................................

47

Steam Coil / Air-Operated Steam Damper Assembly .................................................................................................................

48

Steam Coil / Mechanical Steam Damper Assembly ...................................................................................................................

49

Outer Top / Back Guard Assemblies ...........................................................................................................................................

50

Microprocessor Coin Acceptors Listing ......................................................................................................................................

51

Coin Meter Replacement Parts ...................................................................................................................................................

52

Electrical Oven Component Application Chart ............................................................................................................................

53

Additional Parts Available ............................................................................................................................................................

54

Non-CoinControl Door Assembly

For Models Mfd. as of July 1, 2002

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

 

 

1

881053

1

ADC Logo with Tape

 

 

 

 

870011

1

Double Sided Tape Kit

 

 

2

883550

1

White Control Door Assembly

 

 

 

 

 

 

(includes illus. nos. 2 and 3)

 

 

 

 

883551

1

Ivory Control Door Assembly

 

 

 

 

 

 

(includes illus. nos. 2 and 3)

 

 

 

 

883552

1

Coral Blue Control Door Assembly

 

 

 

 

 

 

(includes illus. nos. 2 and 3)

 

 

3

117604

3

Sponge Tape (sold by the foot)

 

 

4

150317

2

#10-16x 3/4” TORX PLUS® BTN Type 1

 

 

5

102603

1

Control Door Rod Support Catch

 

 

6

102601

1

Control Door Rod Retainer Clip

 

 

7

102502

1

Control Door Support Rod

 

 

8

150321

2

#10-32x 1/2” Phillips Machine Screw

 

 

9

154011

2

#10-32Multi-ThreadU-Nut

 

 

 

 

 

 

 

 

 

 

4

 

 

 

American Dryer Corporation

450342 - 4

Coin Control Door Assembly

For Models Mfd. as of July 1, 2002

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

 

1

160015

1

High Security Lock Assembly

 

 

 

160104

1

Key ONLY

 

2

160016

1

Lock Cam ONLY

 

3

881053

1

ADC Logo with Tape

 

4

883477

1

White Control Door Assembly with Black Trim

 

 

 

 

 

(includes illus. nos. 4 through 7)

 

 

 

883478

1

Ivory Control Door with Black Trim

 

 

 

 

 

(includes illus. nos. 4 through 7)

 

 

 

883549

1

Coral Blue Control Door with Black Trim

 

 

 

 

 

(includes illus. nos. 4 through 7)

 

5

883476

1

Black Trim Strip with Lock Hole

 

6

117604

6

Sponge Tape (sold by the foot)

 

7

152014

4

1/4-20with 3/4” Free Spin Wash Nut

 

8

150317

2

#10-16x 3/4” TORX PLUS® BTN Type 1

 

9

102603

1

Control Door Rod Support Catch

 

10

102601

1

Control Door Rod Retainer Clip

 

11

102502

1

Control Door Support Rod

 

 

 

 

 

 

 

 

450342 - 4

 

 

www.amdry.com

5

Control Door Assembly

For Models Mfd. prior to July 1, 2002

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

 

 

1

160015

1

High Security MK-100Lock Assembly with Key (for coin models Only)

 

 

 

 

160017

1

Special Dummy Lock ONLY (for non-coinmodels Only)

 

 

 

 

160104

1

MK-100Key ONLY

 

 

2

160052

1

Lock Cam ONLY

 

 

3

881053

1

ADC Logo with Tape

 

 

 

 

870011

1

Double Sided Tape Kit

 

 

4

882511

1

White Control Door Assembly Less Lock

 

 

 

 

 

 

(includes illus. nos. 4 and 5)

 

 

 

 

882513

1

Almond B Control Door Assembly Less Lock

 

 

 

 

 

 

(includes illus. nos. 4 and 5)

 

 

 

 

882512

1

Coral Blue Control Door Assembly Less Lock

 

 

 

 

 

 

(includes illus. nos. 4 and 5)

 

 

5

117603

3

Noise Suppressor Tape (sold by the foot)

 

 

6

150300

2

#10-16x 1/2” Hex Washer TEK Screw

 

 

7

102603

1

Control Door Rod Support Catch

 

 

8

150300

2

#10-16x 1/2” Hex Washer TEK Screw

 

 

9

102502

1

Control Door Support Rod

 

 

10

102601

1

Control Door Rod Retainer Clip

 

 

 

 

 

 

 

 

 

6

 

 

 

American Dryer Corporation

450342 - 4

Phase 5 Non-CoinMicroprocessor Control Panel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

 

1

112535

1

Non-CoinEnglish Keypad Label Assembly

 

 

 

112276

1

Non-CoinStick-OnLabels (English Only) … Not Illustrated

 

 

 

112275

1

3-LanguageNon-CoinStick-OnLabel

 

 

 

 

 

(Spanish, Italian, and Hebrew) … Not Illustrated

 

 

 

112277

1

3-LanguageNon-CoinStick-OnLabel

 

 

 

 

 

(English, Spanish, and Hebrew) … Not Illustrated

 

 

 

112278

1

5-LanguageNon-CoinStick-OnLabel

 

 

 

 

 

(Italian, Dutch, French, German, and Chinese) … Not Illustrated

 

2

801255

1

Phase 5 Microprocessor Control Panel ONLY

 

 

 

801256

1

Phase 5 Microprocessor Control Panel ONLY with Battery Bracket

 

 

 

801206

1

Phase 5 Non-CoinNon-ReversingMicroprocessor Control Panel Assembly Complete

 

 

 

 

 

(includes illus. nos. 1 through 5)

 

 

 

801207

1

Phase 5 Non-CoinReversing Microprocessor Control Panel Assembly Complete

 

 

 

 

 

(includes illus. nos. 1 through 5)

 

3

137222

1

Phase 5 Non-CoinNon-ReversingController ONLY

 

 

 

137231

1

Phase 5 Non-CoinReversing Controller ONLY

 

 

 

824998

1

Phase 5 Battery Clip

 

4

153010

2

#6 Star Washer

 

5

150005

2

#6-32x 1/4” Phillips Round Head Machine Screw

 

6

150309

1

#10-16x 1/2” Hex Head TEK Crimptite Screw

 

7

136048

1

1/8-Amp(Slo-Blo)Fuse

 

IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

450342 - 4

 

 

www.amdry.com

7

Phase 5 Coin Microprocessor Control Panel Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

American Dryer Corporation

450342 - 4

 

Phase 5 Coin Microprocessor Control Panel Assembly

Illus. No.

Part No.

Qty.

Description

1

112526

1

Coin Keypad Label Assembly

2

883537

1

Phase 5 Coin Control Panel Assembly

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

(for models mfd. as of June 25, 2002)

 

883538

1

Phase 5 Coin Control Panel Assembly with Battery Option

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

(for models mfd. as of June 25, 2002)

 

883582

1

Phase 5 Coin Control Panel Assembly with Battery Option

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

(for models mfd. prior to June 25, 2002)

 

883581

1

Phase 5 Coin Control Panel Assembly

 

 

 

(includes illus. nos. 1, 2, and 4 through 6)

 

 

 

(for models mfd. prior to June 25, 2002)

 

883539

1

Coin Control Panel ONLY

 

 

 

(for models mfd. as of June 25, 2002)

 

883540

1

Coin Control Panel ONLY with Battery Bracket

 

 

 

(for models mfd. as of June 25, 2002)

 

883580

1

Coin Control Panel ONLY

 

 

 

(for models mfd. prior to June 25, 2002)

 

883579

1

Coin Control Panel ONLY with Battery Bracket

 

 

 

(for models mfd. prior to June 25, 2002)

3

150309

1

#10-16x 1/2” Hex Head TEK Crimptite Screw

4

137213

1

Phase 5 Coin Controller ONLY

 

824998

1

Phase 5 Battery Clip

5

153010

2

#6 Star Washer

6

150005

2

#6-32x 1/4” Phillips Round Head Machine Screw

7

––––––

1

Microprocessor Coin Acceptor

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 51)

8

––––––

1

Optic Switch ONLY

 

 

 

(refer to Microprocessor Coin Acceptors Listing on page 51)

9

137023

1

Optic Switch Connector ONLY

10

137021

3

Microprocessor Socket ONLY

 

880772

1

Single Coin Optical Switch Harness

 

122800

1

Microprocessor (female) Pin Extraction Tool

11

136048

1

1/8-Amp(Slo-Blo)Fuse

IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).

450342 - 4

www.amdry.com

9

Coin and Non-CoinControl Box Assembly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

132002

1

Transformer (for mechanical steam dampers 208 VAC and higher)

2

150300

2

#10-16x 1/2” Hex Washer TEK Screw

3

150301

2

#8 x 7/16” Phillips Pan Head TEK Screw

4

131931

1

Steam Valve Relay – 24 VAC (for mechanical steam damper models Only)

5

137035

1

Motor Capacitor (for mechanical steam damper models Only)

6

323583

1

Capacitor Bracket (for mechanical steam damper models Only)

7

150300

2

#10-16x 1/2” Hex Washer TEK Screw

8

122641

1

15-PinMicroprocessor Connector

9

122706

*

Socket Terminal ONLY

122801

1

Pin / Socket Extraction Tool

* As required.

10

American Dryer Corporation

450342 - 4