Altec Lansing CommStar SV6 User Manual

Size:
964.84 Kb
Download

SV6

Powered Surface-MountSpeaker

FEATURES – THE ALTEC LANSING DIFFERENCE

High-Definition6.5” Duplex™ Speaker

Bi-Amplifiedwith Dual Channel Digital Power Amplifier

DSP Processing Maximizes Performance

Cat5 Plug+Play via DPL™ (patent pending)

Adjustable Wall-MountIncluded

Volume Control

GENERAL PRODUCT DESCRIPTION

 

 

 

 

 

 

Altec Lansing’s CommStar™ is an exciting alternative to

 

 

 

 

conventional 25/70/100V distributed sound systems. A typical

 

 

 

 

CommStar system consists of one or more power supplies

 

 

 

 

connected via Cat5 to high-fidelitypowered speakers. The Cat5

GENERAL SPECIFICATIONS

 

carries low voltage power and digital audio to the speaker(s).

 

 

 

 

 

 

 

 

 

Frequency Response

65 Hz – 18 kHz (+5 dB)

The SV6 Powered Surface-MountSpeaker starts with a powerful

 

Coverage

 

110 degrees nominal

20 oz. 6.5” woofer and 1” horn-loadedsilk dome tweeter. A dual-

 

Maximum SPL

107 dB peak

channel digital power amplifier drives the woofer and tweeter

 

Digital Power Link In/Out (DPL™)

with a dedicated channel for each.

A powerful DSP

engine

 

Back Panel:

interchangeable

2 x RJ45

provides crossover, equalization, limiter protection, and digital-to-

 

Power On Indicator

 

analog conversion. The speaker and electronics are housed in

 

Baffle Mounted:

Blue LED

an attractive enclosure with adjustable wall-mount.A convenient

 

Volume Control

 

volume control is located on the ported baffle under the grille

 

Baffle Mounted: rotary shaft

use flat-tipscrewdriver

assembly that can be easily removed when adjustments are

 

Connections standard Cat5 cable with RJ45 terminations

necessary.

Standard

Cat5 cable terminated with RJ45

 

Power Supply-to-firstSpeaker

<100 ft recommended

connectors daisy chain to deliver supply voltage and digital audio

 

Speaker-to-Speaker

<50 ft recommended

to each speaker. The easy-to-Installmounting system routes the

 

Model

SV6W

Matte White

Cat5 cables out of sight within the wall-mount.

 

 

 

 

SV6G

Dark Gray

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dimensions

13.0” H x 8.5”W x 12.1” deep

APPLICATIONS

 

 

 

 

 

 

303mm x 216mm x 307mm deep

The CommStar

SV6

Powered Surface-MountSpeaker is

 

Weight 9.5 pounds (4.3 kg)

net weight

 

11.5 pounds (5.2 kg)

shipping weight

powered by the SM1 Source Master or the C1 Power Converter.

 

 

Power Requirements

SM1 Source Master

It is perfect

for

sound

reinforcement and/or

public

address

 

 

 

 

C1 Power Converter

needs. Meeting

rooms,

classrooms,

waiting

rooms,

under-

 

 

 

 

Included

 

Wall-mount

balcony, and retail spaces are only the beginning for the

 

 

CommStar SV6 Powered Speaker plug-n-playsolution.

 

 

 

 

 

Microphone

 

 

 

 

 

SM1 Source Master

CD

 

 

 

 

 

 

 

 

 

 

 

DPL™

 

 

 

 

 

 

 

 

 

 

 

Player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MP3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

© 2006 Altec Lansing Professional 1000 W. Wilshire Blvd., Suite 362 Oklahoma City, Oklahoma 73116

 

Phone: 1.405.848.3108 Fax: 1.405.848.3217 Email: proinfo@alteclansing.com

Revision 01

Oct 2006

ARCHITECT’S AND ENGINEER’S SPECIFICATIONS

The loudspeaker system shall be a high fidelity type consisting of a 6.5 inch/165mm Duplex® loudspeaker component with 1 inch/25.4mm high frequency soft-dometweeter. A DSP processor providing electronic crossover and equalization shall be internal to the loudspeaker enclosure. Also internal to the loudspeaker enclosure shall be a dual channel power amplifier. The signal input shall beAES-EBUdigital audio delivered via standard Cat5 cable terminated with RJ45 connectors. The loudspeaker system shall have an operating bandwidth of 65 Hz - 18 kHz (+5 dB) and be capable of delivering 107 dB peaks when measured at a distance of one meter. The loudspeaker shall have nominal conical coverage angle of 110 degrees. The dimensions shall be 13 inches tall by 8.5 inches wide by 12.1 inches deep. The loudspeaker system shall weigh 9.5 lbs./4.3 kg. The loudspeaker system shall be the Altec Lansing Professional model SV6.

dB-SPL

 

 

 

 

 

 

 

 

 

dB-SPL

 

 

 

 

 

 

 

 

 

105

 

 

 

 

 

 

 

 

 

105

 

 

 

 

 

 

 

 

 

100

 

 

 

 

 

 

 

 

 

100

 

 

 

 

 

 

 

 

 

95

 

 

 

 

 

 

 

 

 

95

 

 

 

 

 

 

 

 

 

90

 

 

 

 

 

 

 

 

 

90

 

 

 

 

 

 

 

 

 

85

 

 

 

 

 

 

 

 

 

85

 

 

 

 

 

 

 

 

 

80

 

 

 

 

 

 

 

 

 

80

 

 

 

 

 

 

 

 

 

75

 

 

 

 

 

 

 

 

 

75

 

 

 

 

 

 

 

 

 

20

50

100

200

500

1k

2k

5k

10k

20k

20

50

100

200

500

1k

2k

5k

10k

20k

MusicPath Frequency Response: CV6 + SM1 Source Master

Frequency Response: CV6 + C1 Power Converter

 

 

Beamwidth

 

 

190

 

 

 

170

 

 

 

150

 

 

Degree

130

 

 

110

 

 

90

 

 

 

70

 

 

 

50

 

 

 

30

 

 

 

10

 

 

 

100

1000

10000

 

 

Frequency

 

Components and Accessories:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SM1

Source Master

Accessories:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1RMK

-

Rack Kit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1RVC - Remote-Volume-Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAT5X258

- 8 x 25' CAT5 cables

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C1

Power Converter

Accessories:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1RMK

-

Rack Kit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1RVC - Remote-Volume-Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2CV6

Powered

Accessories:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ceiling Speaker

2DG1W

-

Industrial Grille (pair)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2RG1G -

Regressed Grille (pair) dark gray

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(pair)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2RG1W

-

Regressed Grille (pair) white

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6Pring

-

Plaster Ring (six per package)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SV6

Powered Speaker

SV6G

-

dark gray

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SV6W

-

white

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(includes wall bracket)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accessories:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1JMG

-

Ceiling Mount Bracket (dark gray)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1JMW

-

Ceiling Mount Bracket (white)

As we are continually striving to improve Altec Lansing products, specifications are subject to change without notice.

VISIT WWW.ALTECPRO.COM FOR

Specification sheets in .pdf format. Download page 1 of the specification sheet for your submittals.

One paragraph A&E Specifications in .doc format

© 2006 Altec Lansing Professional 1000 W. Wilshire Blvd., Suite 362 Oklahoma City, Oklahoma 73116 Phone: 1.405.848.3108 Fax: 1.405.848.3217 Email: proinfo@alteclansing.com

Revision 01

Oct 2006