Altec Lansing BackBeat 906 User Manual

Size:
1.2 Mb
Download

Altec Lansing BackBeat903/906

User Guide

Welcome

Thank you for purchasing the Altec Lansing BackBeat™ 903/906 headphones. This guide contains instructions for setting up and using your new headphones.

Before using this product, please refer to the

For Your Safety guide for important product safety and charging information.

Registering Your Product

Visit the Customer Support area on www.alteclansing.com to register your product online so we can provide you with the best service and technical support.

Getting Assistance

The Altec Lansing Customer Support Team is ready to assist you. You can find answers to frequently asked questions, ask a question using e-mail,receive service over the Internet, or speak directly with a representative. Visit the Customer Support area onwww.alteclansing.com, email support@alteclansing.com or call1-800-ALTEC88(258-3288).

NOTE If you are considering returning this headset, please contact the Customer Support Team first.

NOTE For pairing your headphones to your Bluetooth® mobile phone, your Passkey (PIN code) is 0000.

ii

 

Contents

Package Contents and Accessories...........................................................

2

Charging Your Headphones or Bluetooth Adaptor.....................................

4

Pairing Your Headphones...........................................................................

5

Pairing Your Headphones and Phone/Device....................................

5

Pairing Your Headphones and Bluetooth Adaptor............................

6

Adjusting the Fit..........................................................................................

7

Headphones Phone Controls and Indicators..............................................

8

Headphones Music Controls and Indicators............................................

12

Range........................................................................................................

14

Troubleshooting........................................................................................

15

Troubleshooting with Bluetooth Adaptor.........................................

17

Product Specifications..............................................................................

19

EN

iii

Package Contents and Accessories

Left Earpiece—PhoneControls

 

 

Telescoping/

 

 

Swivel Fit Adjustment

 

 

Call Control Button

 

 

(Answer/End)

 

AC Charger

LED Indicator

 

 

 

 

Charging Jack

 

Micro-USB

Power/Pairing Button

 

Connector(s)

 

[BackBeat 903]

[BackBeat 906]

Stereo Cable

2

Package Contents and Accessories

Right Earpiece—MusicControls

Telescoping/

Swivel Fit Adjustment

Play/Pause/

Bass Boost

OpenMic™ Button

Volume/Tracking/

Mute Button

Call Mute

Volume Down/ Volume Up/

Track Back Track Fwd

Right Eartip

3.5mm connector (for headphone jack)

Power/Pairing Button

LED Indicator

Bluetooth Adaptor

Charging Jack

 

[included with

 

BackBeat 906 only]

 

EN

3

Charging Your Headphones or Bluetooth Adaptor

1

1

2

 

Plug the AC charger into a power outlet.

Connect the charger cable to the headphones or Bluetooth adaptor.

2

2

3Charge each for at least 1 hour before first time use, or 3 hours to fully charge.

The LED indicator glows red while charging. When fully charged, LED will turn blue until unplugged. Do not use your headphones or Bluetooth adaptor while they are connected to the charger.

note Never charge the battery where the temperature may fall below 0°C (32°F) or rise above 40°C(104°F)—forexample, in an unattended motor vehicle.

 

Charging time

 

3 hours ....................

 

Full charge

[BackBeat 906 shown]

1 hour ......................

 

Minimum charge

 

before first use

4

Pairing Your Headphones and Phone/Device

1Turn on your phone’s or device’s Bluetooth® feature.

2With the headphones powered off, press and hold the Power/Pairing button until the LED indicator flashes blue and red.

3Use the phone or device menu to search for the Bluetooth headphones and select 9xxBackBeat.

See your phone’s or device’s user guide for more information.

4If prompted, enter 0000 for the PIN code/ passkey.

Some phones also require that you accept the connection. Pairing is successful when the LED indicator flashes blue.

1

SETTINGS

Time and Date

Phone Settings

Bluetooth

Sound Settings

Network Services

Security

Reset Settings

3

2

9xxBackBeat

4

EN

5

Pairing Your Headphones and Bluetooth Adaptor [BackBeat 906 only]

1With the headphones powered off, press and hold the Power/Pairing button until the

LED Indicator flashes blue and red.

2 With the adaptor powered off, press and hold the Power/Pairing button until the LED Indicator flashes blue and red.

1

3 The headphones and adaptor will both

 

rapidly flash blue when paired successfully.

Both are now ready for use.

2

6

For optimal sound performance and a secure, comfortable fit, the headphones should be adjusted to rest gently in your ear and around the back of your neck.

1Drape the stereo cable behind your neck.

2Guide one earpiece behind your ear and secure the eartip inside your ear using the telescoping/swivel adjustments.

3Repeat step 2 with the other earpiece and continue to adjust the fit in either ear until both eartips rest comfortably and securely in your ears.

Adjusting the Fit

1

2

EN

7

Headphones Phone Controls and Indicators

 

Action

Indicator Light

Tone

 

 

 

 

Turn on the

Press and hold the power/

Glows blue for 2 seconds,

4 rising tones

headphones

pairing button for 2 seconds.

then turns off.

 

 

 

 

 

Turn off the

Press and hold the power/

Glows red for 4 seconds,

4 falling tones

headphones

pairing button for 4 seconds.

then turns off.

 

 

 

 

 

Answer/end

Tap the call control button.

3 blue flashes (repeating)

3 low tones (repeating)

a call

 

while phone is ringing.

while phone is ringing.

 

 

Blue flash every 2 seconds

Single low tone when

 

 

while on a call.

call connects or

 

 

 

disconnects.

 

 

 

 

Make a call

Enter the number on your

Blue flash every 2 seconds

Brief tones,

 

phone and press send.

while call is in progress.

then ringing

 

 

 

 

Reject a call

Press and hold the call

None

Single long

 

control button for 2 seconds.

 

low tone

 

 

 

 

8