Altec Lansing 210 LF SPEAKER CABINET User Manual

Size:
1.27 Mb
Download

.wc o mw w in. focus

 

1 . 8 8 8 . 2 9 4 . 6 4 0 0

 

PRESENTATION SOLUTIONS

Desktop Projector

InFocus Corporation: 27700B SW Parkway Avenue • Wilsonville , Oregon97070-9215Phone:503-685-88881-800-294-6400• Fax:503-685-8887

http://www.infocus.com

In Europe: Strawinskylaan 585. 1077 XX Amsterdam, The Netherlands Phone: (31) 20 579 2000 • Fax: (31) 20 579 2999

In Asia: 238A Thomson Road •#18-01/04Novena Square

Singapore 307684 • Telephone: (65) 6334-9005• Fax: (65)6334-4525

User's Guide 010-0410-00

Part No.010-0410-00

DP6870 User's Manual.qxd

Printed in Japan

010-0410-00

QR55041

Liquid Crystal Projector

User's Guide

Thank you for purchasing this liquid crystal projector.

WARNING • Please read the accompanying manual “Safety Instruction" and this user's guide thoroughly to ensure correct usage through

understanding. After reading, store this instruction manual in a safe place for future reference.

NOTE • The information in this manual is subject to change without notice.

The manufacturer assumes no responsibility for any errors that may appear in this manual

The reproduction, transmission or use of this document or contents is not permitted without express written authority.

TRADEMARK ACKNOWLEDGMENT : PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Apple, Mac and ADB are registered trademarks of Apple Computer, Inc. VESA and SVGA are trademarks of the Video Electronics Standard Association. Windows is a registered trademark of Microsoft Corporation. Carefully observe the trademarks and registered trademarks of all companies, even when not mentioned.

CONTENTS

Page

Page

FEATURES .......................................

2

BEFORE USE ...................................

2

Contents of Package ..............................

2

Part Names.............................................

3

Loading the Batteries..............................

5

INSTALLATION ................................

6

Installation of the Projector and Screen........

6

Angle Adjustment ...................................

6

Cabling ...................................................

7

Power Connection ..................................

8

Example of System Setup ......................

8

Plug & Play .............................................

8

OPERATIONS ...................................

9

Power ON ..................................................

9

Power OFF ..............................................

9

Basic Operation ....................................

10

Setup Menu ..........................................

12

Input Menu............................................

13

Image Menu..........................................

14

Options Menu .......................................

15

No Signal Menu ....................................

16

MAINTENANCE ..............................

17

Lamp.....................................................

17

Air Filters ..............................................

19

Other Maintenance ...............................

19

TROUBLESHOOTING ....................

20

OSD Message ......................................

20

Indicators Message ..............................

21

Symptom ..............................................

22

SPECIFICATIONS...........................

23

.......................................................................................

TABLES

 

Table 1. Installation Reference.................

6

Table 2. Cabling .......................................

7

Table 3. Basic Operation ........................

10

Table 4. Setup Menu ..............................

12

Table 5. Input Menu................................

13

Table 6. Image Menu..............................

14

Table 7. Options Menu ...........................

15

Table 8. No Signal Menu ........................

16

Table 9. OSD Message ..........................

20

Table 10. Indicators Message ................

21

Table 11. Symptom ................................

22

Table 12. Specifications .........................

23

.......................................................................................

For "TECHNICAL" and "REGULATORY

NOTICE", see the end of the manual.

ENGLISH

ENGLISH-1

FEATURES

This liquid crystal projector is used to project various computer signals as well as NTSC / PAL / SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized.

Outstanding Brightness

The UHB lamp and high-efficiencyoptical system assure a high level of brightness.

Partial Magnification Function

Interesting parts of images can be magnified for closer viewing.

Distortion Correction Function

Distortion-freeimages are quickly available.

BEFORE USE

Contents of package

Make sure all of the following items are included in the package. If anything is missing, please contact your dealer.

NOTE Keep the original packing material for future reshipment.

Power Cord

Power Cord

RGB Cable

(US Type)

(Europe Type)

 

Projector

(with Lens Cap)

xxxxxxx

XXXXXX

Digital RGB Cable Video/Audio Cable

Component

(with white lead)

Video Cable

 

(with green lead)

User's Guide (this manual)

Safety Instruction

Quick Start Guide

Product Registration Card

STANDBY/ON BLANK

LASER

VIDEO

RGB

AUTO

"Technology

Mouse cable

Batteries

Upgarde Program" Card

(PS/2)

for Remote Control

"Thank you" Card

 

Transmitter

 

 

MENU KEYSTONE

MENU SELECT

POSITION RESET

FREEZE PinP

MAGNIFY MUTE

OFF

FOCUS ZOOM VOLUME

Remote Control

Transmitter

ENGLISH-2

BEFORE USE (continued)

Part Names

ZOOM Button

KEYSTONE Button

STANDBY/ON Button

LAMP Indicator

POWER Indicator

Remote Control Sensor

Lens

Filter Cover

( Air Filter )

Foot Adjuster

Lens Cap

Remote Control Sensor

Speaker

Power Switch

AC Inlet

(to Power Cord)

DVI Terminal

S-VIDEOTerminal

VIDEO Terminal

AUDIO(MONO)/L

Terminal

AUDIO R Terminal

USB Terminal

 

 

FOCUS Button

ENGLISH

 

 

 

ZOOM

FOCUS

INPUT Button

 

KEYSTONE

INPUT

 

 

MENU

 

 

STANDBY/ON

RESET

MENU Button

 

 

LAMP POWER TEMP

 

 

 

 

RESET Button

 

 

 

TEMP Indicator

 

Control Panel

(Refer to P.9 "OPERATIONS")

Control Panel

Ventilation Openings (exhaust)

Carrying Handle

Filter cover

( Air Filter and Intake) for the Cooling Fan

Front/Right View

Foot Adjuster

 

Terminal Panel

(Refer below)

Rear/Left View

 

DVI

 

 

 

 

RGB IN 1 Terminal

 

 

 

 

 

 

RGB IN 2 Terminal

 

 

 

1

RGB IN

2

RGB OUT Terminal

 

S-VIDEOCOMPO

 

 

 

CONTROL Terminal

 

 

NENT

 

 

 

 

 

 

VIDEO

RGB OUT

 

CONTROL

 

 

 

 

 

AUDIO IN RGB1/DVI Terminal

 

VIDEO

 

 

 

 

 

(MONO)/L

Y

 

 

 

AUDIO IN RGB2 Terminal

 

 

 

 

 

 

AUDIO

 

 

 

 

AUDIO OUT Terminal

USB

 

 

 

RGB 1 RGB 2

OUT

 

R

CB/PB

 

AUDIO IN

AUDIO

 

 

 

 

 

DVI

 

 

 

 

CR/PR

 

 

 

 

 

 

 

 

 

 

COMPONENT VIDEO

Terminal

 

 

 

Y Terminal

 

 

 

CB/PB Terminal

Panel

 

 

 

 

 

 

 

 

CR/PR Terminal

 

 

 

 

 

 

ENGLISH-3

BEFORE USE (continued)

Part Names (continued)

STANDBY/ON Button

VIDEO Button

Disk Pad

Used to operate the mouse shift function and left click function.

AUTO Button

 

 

 

 

BLANK

ST

 

Y/ON

LASER

DB

 

AN

 

 

 

 

 

 

 

RGB

 

 

 

VIDEO

MENU Button

MENU SELECT Button

Used to click the left mouse button.

,,,Button

Used to operate the mouse shift function.

POSITION Button

AUTO

KEYSTONE

 

MENU

CT

 

 

SELE

MENU

RESET

 

POSITION

PinP

 

ZE

 

FREE

MUTE

MAGNIFY

OFF

VOLUME

ZOOM

FOCUS

MAGNIFY Button

REMOTE CONTROL TRANSMITTER

(Refer to P.9 "OPERATIONS")

BLANK Button

LASER Button

RGB Button

MOUSE / RIGHT Button

Used to click the right mouse button.

KEYSTONE Button

RESET Button

Used to click the right mouse button.

PinP Button

FREEZE Button

MUTE Button

VOLUME Button

ZOOM Button

FOCUS Button

These functions work when the mouse control function is activated. Remember, the POSITION, BLANK ON and MENU ON functions disable the mouse control function.

WARNING • The laser pointer of the remote control transmitter is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at

other people. The laser beam can cause vision problems.

CAUTION • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

AVOID EXPOSURE-

LASER RADIATIONS IS

EMITTED FROM THIS

APERTURE

C A U T I O N

LASER RADIATION-

DO NOT STARE INTO BEAM

MAX. OUTPUT: 1mW

WAVE LENGTH: 650nm

CLASS2 LASER PRODUCT

LASER RADIATION

DO NOT STARE INTO BEAM

CLASS2 LASER PRODUCT

MAX. OUTPUT: 1mW

WAVE LENGTH: 650nm

IEC60825-1 :1993+A1:1997

Complies with 21 CFR 1040. 10 and 1040. 11 except for deviations pursuant to Laser Notice No.50, dated 2001.7.26

SMK CORPORATION

6-5-5TogoshiShinagawa-ku,Tokyo, JAPAN142-8511MANUFACTURED Novemver 2001

PLACE OF MANUFACTURER: A

NOTE • Keep the remote control transmitter away from children and pets.

Do not give the remote control transmitter any physical impact. Take care not to drop.

Do not place the heavy objects on the remote control transmitter.

Do not wet the remote control transmitter or place it on any wet object.

Do not place the remote control transmitter close to the cooling fan of the projector.

Do not disassemble the remote control transmitter.

ENGLISH-4

BEFORE USE (continued)

Loading the Batteries

Install the AA batteries into the remote control

transmitter.

 

 

1.

Remove the battery cover.

 

 

 

Push the knob while lifting up the battery cover.

 

 

2.

Load the batteries.

 

 

 

Make sure the plus and minus poles are correctly

1

2

 

oriented.

3.

Close the battery cover.

 

 

CAUTION • Use only the specified batteries with this remote control transmitter. Also, do not mix new and old batteries. This could cause battery

cracking or leakage, which could result in fire or personal injury.

When loading the batteries, make sure the plus and minus terminals are correctly oriented as indicated in the remote control transmitter. Incorrect orientation could cause battery cracking or leakage, which could result in personal injury or pollution of the surrounding environment.

When you dispose the battery, you should obey the law in the relative area or country.

Keep the battery away from children and pets.

When not to be used for an extended period, remove the batteries from the remote control transmitter.

NOTE Replace the batteries when remote control transmitter operation becomes difficult.

ENGLISH

ENGLISH-5

INSTALLATION

Installation of the Projector and Screen

Refer to the drawing and table below for determining the screen size and projection distance.

The projection distances shown in the table below are for full size (1024 x 768 dots).

a: Distance from the projector to the screen. (±10%)b: Distance from the lens center to the bottom of the

screen. (±10%)

Table 1. Installation Reference

Screen size

 

a [inches (m)]

 

b

[inches (m)]

Min.

Max.

[inches (cm)]

 

 

 

 

 

 

 

 

40

(1.0)

55

(1.4)

73

(1.9)

1

(3)

 

 

 

 

 

 

 

 

60

(1.5)

85

(2.2)

114

(2.9)

2

(4)

 

 

 

 

 

 

 

 

80

(2.0)

114

(2.9)

151

(3.8)

2

(6)

 

 

 

 

 

 

 

 

100

(2.5)

144

(3.7)

191

(4.9)

3

(7)

 

 

 

 

 

 

 

 

120

(3.0)

176

(4.5)

231

(5.9)

3

(9)

 

 

 

 

 

 

 

 

150

(3.8)

220

(5.6)

282

(7.2)

4

(11)

 

 

 

 

 

 

 

 

200

(5.0)

291

(7.4)

386

(9.8)

6

(15)

 

 

 

 

 

 

 

 

Screen

Top View

Lens center

b

aSide View

CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual “Safety instruction” and this manual.

• When you fix this unit with a metal tool and the like, you must connect it with ground wire; otherwise, fire or electric shock can result.

Connect the ground terminal of AC inlet of this unit with the ground terminal provided at the building using an optional three-corepower-supplycord.

Please basically use liquid crystal projector at the horizontal position. If you use liquid crystal projector by the lens up position, the lens down position and the side up position, this may cause the heat inside to build up and cause damage. Be especially careful not to install it with ventilation holes blocked.

Do not install LCD projector in smoke effected environment. Smoke residue may buildup on critical parts (i.e.LCD panel, Lens Assy etc.).

Angle Adjustment

Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable within 0˚ to 9˚ approximately.

1.Lift up the front side of the projector, and pressing the foot adjuster button, adjust the projection angle.

2.Release the button to lock at the desired angle.

3.Use the foot adjusters for fine adjustment. Do not force the adjuster screws. This could damage the adjusters or cause the lock to fail.

Foot Adjusters

Variable within the range of approximately 0° - 9°

CAUTION • Do not release the foot adjuster button unless the projector isbeing held; otherwise, the projector could overturn or fingers could get caught and cause personal injury.

ENGLISH-6

INSTALLATION (continued)

Cabling

Refer to the table below for connecting each terminal of the projector to a device.

Table 2. Cabling

Function

Terminal

Cable

 

 

 

Analog RGB input

RGB IN 1

 

 

RGB cable with D-sub15-pinshrink jack

RGB IN 2

 

 

and inch thread screws

 

 

Analog RGB output

RGB OUT

 

 

 

 

Digital RGB input

DVI

DVI cable with inch thread screws

 

 

 

 

AUDIO IN [RGB 1] / [DVI]

 

Audio input

(interlocked with RGB IN 1 or DVI)

Audio cable with stereo mini jack

 

(from the computer)

AUDIO IN [RGB 2]

 

 

 

 

(interlocked with RGB IN 2)

 

 

 

 

PS/2 mouse control

 

PS/2 mouse cable

 

 

 

ADB mouse control

CONTROL

ADB mouse cable

 

 

Serial mouse control

Serial mouse cable

 

 

 

 

RS-232Ccommunication

 

RS-232Ccable

 

 

 

USB mouse control

USB

USB cable

 

 

 

S-videoinput

S-VIDEO

S-videocable with mini DIN4-pinjack

 

 

 

Video input

VIDEO

Video/Audio cable

 

 

 

 

COMPONENT VIDEO Y

 

 

 

 

Component video input

COMPONENT VIDEO CB/PB

Component Video cable

 

 

 

 

COMPONENT VIDEO CR/PR

 

 

 

 

Audio input

AUDIO (MONO)/L

Video/Audio cable or Audio cable with RCA

 

(from video equipment)

AUDIO R

jack

 

 

 

Audio output

AUDIO OUT

Audio cable with stereo mini jack

 

 

 

CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “Safety Instruction”.

Before connecting, turn off to all devices to be connected, except for the USB cable.

The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified.

NOTE • Before connecting, read instruction manuals of the devices to be connected, and make sure that the projector is compatible with the device.

Secure the screws on the connectors and tighten.

For some RGB input modes, the optional Mac adapter is necessary.

To select the DVI input, the computer may need some settings. See the manuals of the computer for details.

Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

Refer to the “TECHNICAL” section for the pin assign of connectors and RS-232Ccommunication data.

When the DVI terminal is used, the RGB OUT terminal may not function.

ENGLISH

ENGLISH-7

INSTALLATION (continued)

Power Connection

Use the correct power cord depending on the power outlet to be used.

Connect the AC inlet of the projector to the power outlet firmly by the power cord.

CAUTION • Be carful in handling the powercord according to instructions of the accompanying manual "Safety Instruction" and this manual.

• Connect the power cord firmly. Avoid using a loose, unsound outlet or failed contact.

Power outlet

AC Inlet

Power Cord

Example of System Setup

Computer

(desktop type)

Computer

(notebook type)

S-VideoTape

Recorder

 

 

DIGTAL

 

 

 

 

 

 

RGB IN

2

S-VIDEO

 

COMPO

 

 

 

 

 

NENT

 

 

 

 

 

VIDEO

RGB OUT

 

CONTROL

 

 

 

 

VIDEO

 

 

 

 

 

(MONO)/L

 

 

 

 

AUDIO

 

 

 

 

 

 

R

CB/PB

AUDIO

IN

AUDIO

USB

 

RGB 1

RGB 2

OUT

DIGITAL

CR/PR

Display

Monitor

Speaker with amplifier

DVD Player

Computer (desktop type)

NOTE • When connecting with a notebook computer, set the proper RGB external image output (setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of the notebook for more information.

Plug & Play

This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is VESA DDC (Display Data Channel) compatible.

Please use this function by connecting the RGB cable with RGB IN 1 terminal (DDC 1/2B compatible), or by connecting a DVI cable with DVI terminal (DDC 2B compatible). Plug & play may not operate by other connections.

NOTE • Plug & play is a system configured with peripheral equipment including a computer, display and an operating system.

This projector is recognized as a plug & play monitor. Use the standard display drivers.

Plug & play may not operate by the computer to connect. Use the RGB IN 2 terminal if plug & play does not operate correctly.

ENGLISH-8